OpenWrt_Luci_Lua/Mi_Lua/xiaoqiang/module/XQDMZModule.lua
2015-05-09 18:48:46 +08:00

275 lines
7.7 KiB
Lua
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

module ("xiaoqiang.module.XQDMZModule", package.seeall)
local XQFunction = require("xiaoqiang.common.XQFunction")
local XQConfigs = require("xiaoqiang.common.XQConfigs")
DMZ_NVRAM = {
["vlan1hwname"] = "et0",
["vlan2hwname"] = "et0",
["vlan3hwname"] = "et0",
["vlan1ports"] = "2 5*",
["vlan2ports"] = "4 5",
["vlan3ports"] = "0 5*"
}
DMZ_NETWORK_CONFIGS = {
-- switch_vlan
["eth0_1"] = {
["device"] = "eth0",
["vlan"] = 1,
["ports"] = "2 5*"
},
["eth0_3"] = {
["device"] = "eth0",
["vlan"] = 3,
["ports"] = "0 5*"
},
-- interface
["dmz"] = {
["ifname"] = "eth0.3",
["proto"] = "static",
["ipaddr"] = "",
["netmask"] = "255.255.255.0"
}
}
DMZ_FIREWALL_CONFIGS = {
-- zone
["zonedmz"] = {
["name"] = "dmz",
["network"] = "dmz",
["input"] = "REJECT",
["output"] = "ACCEPT",
["forward"] = "REJECT"
},
-- rule
["dmzdns"] = {
["src"] = "dmz",
["proto"] = "tcpudp",
["dest_port"] = 53,
["target"] = "ACCEPT"
},
["dmzdhcp"] = {
["src"] = "dmz",
["proto"] = "udp",
["dest_port"] = 67,
["target"] = "ACCEPT"
},
-- forwarding
["dmztowan"] = {
["src"] = "dmz",
["dest"] = "wan"
},
["lantodmz"] = {
["src"] = "lan",
["dest"] = "dmz"
},
-- redirect
["dmz"] = {
["src"] = "wan",
["proto"] = "all",
["target"] = "DNAT",
["dest"] = "lan",
["dest_ip"] = ""
}
}
DMZ_DHCP_CONFIGS = {
-- dhcp
["dmz"] = {
["interface"] = "dmz",
["start"] = 100,
["limit"] = 150,
["leasetime"] = "12h",
["force"] = 1
}
}
--
-- Event
--
function hookLanIPChangeEvent(ip)
if XQFunction.isStrNil(ip) then
return
end
local uci = require("luci.model.uci").cursor()
local lan = ip:gsub(".%d+$","")
local destip = uci:get("firewall", "dmz","dest_ip")
if not XQFunction.isStrNil(destip) then
destip = lan.."."..destip:match(".(%d+)$")
uci:set("firewall", "dmz", "dest_ip", destip)
uci:commit("firewall")
end
end
function unsetDMZ(mode)
local uci = require("luci.model.uci").cursor()
if mode == 1 then
uci:delete("firewall", "zonedmz")
uci:delete("firewall", "dmzdns")
uci:delete("firewall", "dmzdhcp")
uci:delete("firewall", "dmztowan")
uci:delete("firewall", "lantodmz")
uci:delete("firewall", "dmz")
uci:commit("firewall")
uci:delete("dhcp", "dmz")
uci:commit("dhcp")
uci:delete("network", "dmz")
uci:delete("network", "eth0_3")
uci:commit("network")
XQFunction.nvramSet("vlan3hwname", nil)
XQFunction.nvramSet("vlan3ports", nil)
XQFunction.nvramSet("vlan2ports", "4 5")
XQFunction.nvramSet("vlan1ports", "0 2 5*")
XQFunction.setNetMode(nil)
XQFunction.nvramCommit()
elseif mode == 0 then
uci:delete("firewall", "dmz")
uci:commit("firewall")
XQFunction.setNetMode(nil)
XQFunction.nvramCommit()
end
end
function _setSimpleDMZ(destip, destmac)
local uci = require("luci.model.uci").cursor()
local config = DMZ_FIREWALL_CONFIGS["dmz"]
local lanip = uci:get("network", "lan", "ipaddr")
local lanpre = lanip:gsub(".%d+$", "")
local destpre = destip:gsub(".%d+$", "")
if lanpre ~= destpre or lanip == destip then
return 2
end
config.dest_ip = destip
uci:section("firewall", "redirect", "dmz", config)
uci:commit("firewall")
if not XQFunction.isStrNil(destmac) then
local XQLanWanUtil = require("xiaoqiang.util.XQLanWanUtil")
local bind = XQLanWanUtil.addBind(destmac, destip)
if bind == 0 then
XQLanWanUtil.saveBindInfo()
else
return bind
end
end
return 0
end
function _setComplexDMZ(destip, destmac)
local uci = require("luci.model.uci").cursor()
local LuciUtil = require("luci.util")
local lanip = uci:get("network", "lan", "ipaddr")
local ipv = LuciUtil.split(destip, ".")
ipv[4] = 1
ipv = table.concat(ipv, ".")
local lanpre = lanip:gsub(".%d+$", "")
local destpre = destip:gsub(".%d+$", "")
if lanpre == destpre or lanip == destip then
return 2
end
-- nvram
for key, value in pairs(DMZ_NVRAM) do
XQFunction.nvramSet(key, value)
end
XQFunction.nvramCommit()
-- network config
local eth0_1 = DMZ_NETWORK_CONFIGS["eth0_1"]
local eth0_3 = DMZ_NETWORK_CONFIGS["eth0_3"]
local dmz = DMZ_NETWORK_CONFIGS["dmz"]
dmz.ipaddr = ipv
uci:section("network", "switch_vlan", "eth0_1", eth0_1)
uci:section("network", "switch_vlan", "eth0_3", eth0_3)
uci:section("network", "interface", "dmz", dmz)
uci:commit("network")
-- firewall config
local zonedmz = DMZ_FIREWALL_CONFIGS["zonedmz"]
local dmzdns = DMZ_FIREWALL_CONFIGS["dmzdns"]
local dmzdhcp = DMZ_FIREWALL_CONFIGS["dmzdhcp"]
local dmztowan = DMZ_FIREWALL_CONFIGS["dmztowan"]
local lantodmz = DMZ_FIREWALL_CONFIGS["lantodmz"]
local fdmz = DMZ_FIREWALL_CONFIGS["dmz"]
fdmz.dest_ip = destip
uci:section("firewall", "zone", "zonedmz", zonedmz)
uci:section("firewall", "rule", "dmzdns", dmzdns)
uci:section("firewall", "rule", "dmzdhcp", dmzdhcp)
uci:section("firewall", "forwarding", "dmztowan", dmztowan)
uci:section("firewall", "forwarding", "lantodmz", lantodmz)
uci:section("firewall", "redirect", "dmz", fdmz)
uci:commit("firewall")
-- dhcp config
local dhcp = DMZ_DHCP_CONFIGS["dmz"]
uci:section("dhcp", "dhcp", "dmz", dhcp)
-- ip mac bind
if not XQFunction.isStrNil(destmac) then
local XQLanWanUtil = require("xiaoqiang.util.XQLanWanUtil")
local bind = XQLanWanUtil.addBind(destmac, destip)
if bind == 0 then
XQLanWanUtil.saveBindInfo()
else
return bind
end
end
return 0
end
function moduleOn()
local uci = require("luci.model.uci").cursor()
local dmzip = uci:get("firewall", "dmz", "dest_ip")
if dmzip then
return true
else
return false
end
end
-- status
-- 0:关闭
-- 1:开启
-- 2:冲突(端口转发被开启DMZ功能就不能开启)
function getDMZInfo()
local XQPortForward = require("xiaoqiang.module.XQPortForward")
local uci = require("luci.model.uci").cursor()
local info = {}
if XQPortForward.moduleOn() then
info["status"] = 2
else
info["status"] = moduleOn() and 1 or 0
if info.status == 1 then
info["ip"] = uci:get("firewall", "dmz", "dest_ip") or ""
end
end
info["lanip"] = uci:get("network", "lan", "ipaddr") or ""
return info
end
-- mode 0/1 简单/复杂
-- return 0/1/2/3/4 设置成功/IP冲突/MACIP不合法/工作模式不可设置/开启了端口转发,DMZ不能启用
function setDMZ(mode, destip, destmac)
if XQFunction.isStrNil(destip) then
return 2
end
local XQPortForward = require("xiaoqiang.module.XQPortForward")
if XQPortForward.moduleOn() then
return 4
end
if mode == 0 then
XQFunction.setNetMode("dmzsimple")
return _setSimpleDMZ(destip, destmac)
elseif mode == 1 then
XQFunction.setNetMode("dmzmode")
return _setComplexDMZ(destip, destmac)
else
return 3
end
end
function dmzReload(mode)
if mode == 0 then
-- reload services
os.execute("/etc/init.d/firewall restart")
XQFunction.forkRestartDnsmasq()
elseif mode == 1 then
-- fork reboot
XQFunction.forkReboot()
end
end