Add our config file

git-svn-id: svn://svn.openwrt.org/openwrt/packages@7113 3c298f89-4303-0410-b956-a3cf2f4a3e73

ipv6/aiccu/files/aiccu.conf

@@ -0,0 +1,78 @@
+# AICCU Configuration
+
+# Login information (defaults: none)
+#username <your nichandle/username>
+#password <your password>
+
+# Protocol and server to use for setting up the tunnel (defaults: none)
+#protocol <tic|tsp|l2tp>
+#server <server to use>
+
+# Interface names to use (default: aiccu)
+# ipv6_interface is the name of the interface that will be used as a tunnel interface.
+# On *BSD the ipv6_interface should be set to gifX (eg gif0) for proto-41 tunnels
+# or tunX (eg tun0) for AYIYA tunnels.
+ipv6_interface sixxs
+
+# The tunnel_id to use (default: none)
+# (only required when there are multiple tunnels in the list)
+#tunnel_id Txxxx
+
+# Be verbose? (default: false)
+verbose false
+
+# Daemonize? (default: true)
+# Set to false if you want to see any output
+# When true output goes to syslog
+#
+# WARNING: never run AICCU from DaemonTools or a similar automated
+# 'restart' tool/script. When AICCU does not start, it has a reason
+# not to start which it gives on either the stdout or in the (sys)log
+# file. The TIC server *will* automatically disable accounts which
+# are detected to run in this mode.
+#
+daemonize true
+
+# Automatic Login and Tunnel activation?
+automatic true
+
+# Require TLS?
+# When set to true, if TLS is not supported on the server
+# the TIC transaction will fail.
+# When set to false, it will try a starttls, when that is
+# not supported it will continue.
+# In any case if AICCU is build with TLS support it will
+# try to do a 'starttls' to the TIC server to see if that
+# is supported.
+requiretls false
+
+# PID File
+pidfile /var/run/aiccu.pid
+
+# Add a default route (default: true)
+defaultroute true
+
+# Script to run after setting up the interfaces (default: none)
+#setupscript /usr/local/etc/aiccu-subnets.sh
+
+# Make heartbeats (default true)
+# In general you don't want to turn this off
+# Of course only applies to AYIYA and heartbeat tunnels not to static ones
+#makebeats true
+
+# Don't configure anything (default: false)
+#noconfigure true
+
+# Behind NAT (default: false)
+# Notify the user that a NAT-kind network is detected
+#behindnat true
+
+# Local IPv4 Override (default: none)
+# Overrides the IPv4 parameter received from TIC
+# This allows one to configure a NAT into "DMZ" mode and then
+# forwarding the proto-41 packets to an internal host.
+# 
+# This is only needed for static proto-41 tunnels!
+# AYIYA and heartbeat tunnels don't require this.
+#local_ipv4_override
+