diff -Naur freeradius-server-2.1.4/raddb/attrs freeradius-server-2.1.4.new/raddb/attrs
--- freeradius-server-2.1.4/raddb/attrs 2009-03-10 19:26:50.000000000 -0700
+++ freeradius-server-2.1.4.new/raddb/attrs 2009-04-07 15:09:02.000000000 -0700
@@ -1,7 +1,4 @@
#
-# Configuration file for the rlm_attr_filter module.
-# Please see rlm_attr_filter(5) manpage for more information.
-#
# $Id$
#
# This file contains security and configuration information
diff -Naur freeradius-server-2.1.4/raddb/attrs.access_reject freeradius-server-2.1.4.new/raddb/attrs.access_reject
--- freeradius-server-2.1.4/raddb/attrs.access_reject 2009-03-10 19:26:50.000000000 -0700
+++ freeradius-server-2.1.4.new/raddb/attrs.access_reject 2009-04-07 15:09:20.000000000 -0700
@@ -1,7 +1,4 @@
#
-# Configuration file for the rlm_attr_filter module.
-# Please see rlm_attr_filter(5) manpage for more information.
-#
# $Id$
#
# This configuration file is used to remove almost all of the attributes
diff -Naur freeradius-server-2.1.4/raddb/attrs.accounting_response freeradius-server-2.1.4.new/raddb/attrs.accounting_response
--- freeradius-server-2.1.4/raddb/attrs.accounting_response 2009-03-10 19:26:50.000000000 -0700
+++ freeradius-server-2.1.4.new/raddb/attrs.accounting_response 2009-04-07 15:09:32.000000000 -0700
@@ -1,7 +1,4 @@
#
-# Configuration file for the rlm_attr_filter module.
-# Please see rlm_attr_filter(5) manpage for more information.
-#
# $Id$
#
# This configuration file is used to remove almost all of the attributes
diff -Naur freeradius-server-2.1.4/raddb/attrs.pre-proxy freeradius-server-2.1.4.new/raddb/attrs.pre-proxy
--- freeradius-server-2.1.4/raddb/attrs.pre-proxy 2009-03-10 19:26:50.000000000 -0700
+++ freeradius-server-2.1.4.new/raddb/attrs.pre-proxy 2009-04-07 15:09:44.000000000 -0700
@@ -1,7 +1,4 @@
#
-# Configuration file for the rlm_attr_filter module.
-# Please see rlm_attr_filter(5) manpage for more information.
-#
# $Id$
#
# This file contains security and configuration information
diff -Naur freeradius-server-2.1.4/raddb/dictionary.in freeradius-server-2.1.4.new/raddb/dictionary.in
--- freeradius-server-2.1.4/raddb/dictionary.in 2009-03-10 19:26:50.000000000 -0700
+++ freeradius-server-2.1.4.new/raddb/dictionary.in 2009-04-07 15:10:18.000000000 -0700
@@ -11,14 +11,12 @@
#
# The filename given here should be an absolute path.
#
-$INCLUDE @prefix@/share/freeradius/dictionary
+$INCLUDE @prefix@/share/freeradius2/dictionary
#
# Place additional attributes or $INCLUDEs here. They will
# over-ride the definitions in the pre-defined dictionaries.
#
-# See the 'man' page for 'dictionary' for information on
-# the format of the dictionary files.
#
# If you want to add entries to the dictionary file,
diff -Naur freeradius-server-2.1.4/raddb/eap.conf freeradius-server-2.1.4.new/raddb/eap.conf
--- freeradius-server-2.1.4/raddb/eap.conf 2009-03-10 19:26:50.000000000 -0700
+++ freeradius-server-2.1.4.new/raddb/eap.conf 2009-04-07 15:20:28.000000000 -0700
@@ -27,7 +27,7 @@
# then that EAP type takes precedence over the
# default type configured here.
#
- default_eap_type = md5
+ default_eap_type = peap
# A list is maintained to correlate EAP-Response
# packets with EAP-Request packets. After a
@@ -72,23 +72,8 @@
# for wireless connections. It is insecure, and does
# not provide for dynamic WEP keys.
#
- md5 {
- }
-
- # Cisco LEAP
- #
- # We do not recommend using LEAP in new deployments. See:
- # http://www.securiteam.com/tools/5TP012ACKE.html
- #
- # Cisco LEAP uses the MS-CHAP algorithm (but not
- # the MS-CHAP attributes) to perform it's authentication.
- #
- # As a result, LEAP *requires* access to the plain-text
- # User-Password, or the NT-Password attributes.
- # 'System' authentication is impossible with LEAP.
- #
- leap {
- }
+# md5 {
+# }
# Generic Token Card.
#
@@ -101,10 +86,10 @@
# the users password will go over the wire in plain-text,
# for anyone to see.
#
- gtc {
+# gtc {
# The default challenge, which many clients
# ignore..
- #challenge = "Password: "
+# challenge = "Password: "
# The plain-text response which comes back
# is put into a User-Password attribute,
@@ -118,8 +103,8 @@
# configured for the request, and do the
# authentication itself.
#
- auth_type = PAP
- }
+# auth_type = PAP
+# }
## EAP-TLS
#
@@ -130,11 +115,6 @@
# built, the "tls", "ttls", and "peap" sections will
# be ignored.
#
- # Otherwise, when the server first starts in debugging
- # mode, test certificates will be created. See the
- # "make_cert_command" below for details, and the README
- # file in raddb/certs
- #
# These test certificates SHOULD NOT be used in a normal
# deployment. They are created only to make it easier
# to install the server, and to perform some simple
@@ -201,7 +181,7 @@
# In these cases, fragment size should be
# 1024 or less.
#
- # fragment_size = 1024
+ fragment_size = 1024
# include_length is a flag which is
# by default set to yes If set to
@@ -211,7 +191,7 @@
# message is included ONLY in the
# First packet of a fragment series.
#
- # include_length = yes
+ include_length = yes
# Check the Certificate Revocation List
#
@@ -220,83 +200,74 @@
# 'c_rehash' is OpenSSL's command.
# 3) uncomment the line below.
# 5) Restart radiusd
- # check_crl = yes
- # CA_path = /path/to/directory/with/ca_certs/and/crls/
+# check_crl = yes
+# CA_path = /path/to/directory/with/ca_certs/and/crls/
+
+ #
+ # If check_cert_issuer is set, the value will
+ # be checked against the DN of the issuer in
+ # the client certificate. If the values do not
+ # match, the cerficate verification will fail,
+ # rejecting the user.
+ #
+# check_cert_issuer = "/C=GB/ST=Berkshire/L=Newbury/O=My Company Ltd"
+
+ #
+ # If check_cert_cn is set, the value will
+ # be xlat'ed and checked against the CN
+ # in the client certificate. If the values
+ # do not match, the certificate verification
+ # will fail rejecting the user.
+ #
+ # This check is done only if the previous
+ # "check_cert_issuer" is not set, or if
+ # the check succeeds.
+ #
+# check_cert_cn = %{User-Name}
- #
- # If check_cert_issuer is set, the value will
- # be checked against the DN of the issuer in
- # the client certificate. If the values do not
- # match, the cerficate verification will fail,
- # rejecting the user.
- #
- # check_cert_issuer = "/C=GB/ST=Berkshire/L=Newbury/O=My Company Ltd"
-
- #
- # If check_cert_cn is set, the value will
- # be xlat'ed and checked against the CN
- # in the client certificate. If the values
- # do not match, the certificate verification
- # will fail rejecting the user.
- #
- # This check is done only if the previous
- # "check_cert_issuer" is not set, or if
- # the check succeeds.
- #
- # check_cert_cn = %{User-Name}
- #
# Set this option to specify the allowed
# TLS cipher suites. The format is listed
# in "man 1 ciphers".
cipher_list = "DEFAULT"
#
-
- # This configuration entry should be deleted
- # once the server is running in a normal
- # configuration. It is here ONLY to make
- # initial deployments easier.
- #
- make_cert_command = "${certdir}/bootstrap"
-
- #
# Session resumption / fast reauthentication
# cache.
#
- cache {
- #
- # Enable it. The default is "no".
- # Deleting the entire "cache" subsection
- # Also disables caching.
- #
- # You can disallow resumption for a
- # particular user by adding the following
- # attribute to the control item list:
- #
- # Allow-Session-Resumption = No
- #
- # If "enable = no" below, you CANNOT
- # enable resumption for just one user
- # by setting the above attribute to "yes".
- #
- enable = no
-
- #
- # Lifetime of the cached entries, in hours.
- # The sessions will be deleted after this
- # time.
- #
- lifetime = 24 # hours
-
- #
- # The maximum number of entries in the
- # cache. Set to "0" for "infinite".
- #
- # This could be set to the number of users
- # who are logged in... which can be a LOT.
- #
- max_entries = 255
- }
+# cache {
+ #
+ # Enable it. The default is "no".
+ # Deleting the entire "cache" subsection
+ # Also disables caching.
+ #
+ # You can disallow resumption for a
+ # particular user by adding the following
+ # attribute to the control item list:
+ #
+ # Allow-Session-Resumption = No
+ #
+ # If "enable = no" below, you CANNOT
+ # enable resumption for just one user
+ # by setting the above attribute to "yes".
+ #
+# enable = no
+
+ #
+ # Lifetime of the cached entries, in hours.
+ # The sessions will be deleted after this
+ # time.
+ #
+# lifetime = 24 # hours
+
+ #
+ # The maximum number of entries in the
+ # cache. Set to "0" for "infinite".
+ #
+ # This could be set to the number of users
+ # who are logged in... which can be a LOT.
+ #
+# max_entries = 255
+# }
}
# The TTLS module implements the EAP-TTLS protocol,
@@ -320,7 +291,7 @@
#
# in the control items for a request.
#
- ttls {
+# ttls {
# The tunneled EAP session needs a default
# EAP type which is separate from the one for
# the non-tunneled EAP module. Inside of the
@@ -328,7 +299,7 @@
# If the request does not contain an EAP
# conversation, then this configuration entry
# is ignored.
- default_eap_type = md5
+# default_eap_type = mschapv2
# The tunneled authentication request does
# not usually contain useful attributes
@@ -344,7 +315,7 @@
# is copied to the tunneled request.
#
# allowed values: {no, yes}
- copy_request_to_tunnel = no
+# copy_request_to_tunnel = yes
# The reply attributes sent to the NAS are
# usually based on the name of the user
@@ -357,20 +328,8 @@
# the tunneled request.
#
# allowed values: {no, yes}
- use_tunneled_reply = no
-
- #
- # The inner tunneled request can be sent
- # through a virtual server constructed
- # specifically for this purpose.
- #
- # If this entry is commented out, the inner
- # tunneled request will be sent through
- # the virtual server that processed the
- # outer requests.
- #
- virtual_server = "inner-tunnel"
- }
+# use_tunneled_reply = yes
+# }
##################################################
#
@@ -433,26 +392,16 @@
# the PEAP module also has these configuration
# items, which are the same as for TTLS.
- copy_request_to_tunnel = no
- use_tunneled_reply = no
+ copy_request_to_tunnel = yes
+ use_tunneled_reply = yes
# When the tunneled session is proxied, the
# home server may not understand EAP-MSCHAP-V2.
# Set this entry to "no" to proxy the tunneled
# EAP-MSCHAP-V2 as normal MSCHAPv2.
- # proxy_tunneled_request_as_eap = yes
+ proxy_tunneled_request_as_eap = no
- #
- # The inner tunneled request can be sent
- # through a virtual server constructed
- # specifically for this purpose.
- #
- # If this entry is commented out, the inner
- # tunneled request will be sent through
- # the virtual server that processed the
- # outer requests.
- #
- virtual_server = "inner-tunnel"
+ EAP-TLS-Require-Client-Cert = no
}
#
diff -Naur freeradius-server-2.1.4/raddb/ldap.attrmap freeradius-server-2.1.4.new/raddb/ldap.attrmap
--- freeradius-server-2.1.4/raddb/ldap.attrmap 2009-03-10 19:26:50.000000000 -0700
+++ freeradius-server-2.1.4.new/raddb/ldap.attrmap 2009-04-07 15:21:54.000000000 -0700
@@ -13,8 +13,7 @@
# If not present, defaults to "==" for checkItems,
# and "=" for replyItems.
# If present, the operator here should be one
-# of the same operators as defined in the "users"3
-# file ("man users", or "man 5 users").
+# of the same operators as defined in the "users" file.
# If an operator is present in the value of the
# LDAP entry (i.e. ":=foo"), then it over-rides
# both the default, and any operator given here.
diff -Naur freeradius-server-2.1.4/raddb/modules/counter freeradius-server-2.1.4.new/raddb/modules/counter
--- freeradius-server-2.1.4/raddb/modules/counter 2009-03-10 19:26:50.000000000 -0700
+++ freeradius-server-2.1.4.new/raddb/modules/counter 2009-04-08 01:34:16.000000000 -0700
@@ -69,7 +69,7 @@
# 'check-name' attribute.
#
counter daily {
- filename = ${db_dir}/db.daily
+ filename = ${radacctdir}/db.daily
key = User-Name
count-attribute = Acct-Session-Time
reset = daily
diff -Naur freeradius-server-2.1.4/raddb/modules/detail freeradius-server-2.1.4.new/raddb/modules/detail
--- freeradius-server-2.1.4/raddb/modules/detail 2009-03-10 19:26:50.000000000 -0700
+++ freeradius-server-2.1.4.new/raddb/modules/detail 2009-04-07 15:28:33.000000000 -0700
@@ -46,8 +46,7 @@
#
# Every entry in the detail file has a header which
- # is a timestamp. By default, we use the ctime
- # format (see "man ctime" for details).
+ # is a timestamp. By default, we use the ctime format.
#
# The header can be customized by editing this
# string. See "doc/variables.txt" for a description
diff -Naur freeradius-server-2.1.4/raddb/modules/exec freeradius-server-2.1.4.new/raddb/modules/exec
--- freeradius-server-2.1.4/raddb/modules/exec 2009-03-10 19:26:50.000000000 -0700
+++ freeradius-server-2.1.4.new/raddb/modules/exec 2009-04-07 15:29:45.000000000 -0700
@@ -15,9 +15,8 @@
# of the program which is executed. Due to RADIUS protocol
# limitations, any output over 253 bytes will be ignored.
#
-# The RADIUS attributes from the user request will be placed
-# into environment variables of the executed program, as
-# described in "man unlang" and in doc/variables.txt
+# The RADIUS attributes from the user request will be placed into environment
+# variables of the executed program, as described in doc/variables.txt
#
# See also "echo" for more sample configuration.
#
diff -Naur freeradius-server-2.1.4/raddb/modules/pap freeradius-server-2.1.4.new/raddb/modules/pap
--- freeradius-server-2.1.4/raddb/modules/pap 2009-03-10 19:26:50.000000000 -0700
+++ freeradius-server-2.1.4.new/raddb/modules/pap 2009-04-07 15:31:17.000000000 -0700
@@ -4,8 +4,7 @@
# PAP module to authenticate users based on their stored password
#
-# Supports multiple encryption/hash schemes. See "man rlm_pap"
-# for details.
+# Supports multiple encryption/hash schemes.
#
# The "auto_header" configuration item can be set to "yes".
# In this case, the module will look inside of the User-Password
@@ -14,5 +13,5 @@
# with the correct value. It will also automatically handle
# Base-64 encoded data, hex strings, and binary data.
pap {
- auto_header = no
+ auto_header = yes
}
diff -Naur freeradius-server-2.1.4/raddb/modules/radutmp freeradius-server-2.1.4.new/raddb/modules/radutmp
--- freeradius-server-2.1.4/raddb/modules/radutmp 2009-03-10 19:26:50.000000000 -0700
+++ freeradius-server-2.1.4.new/raddb/modules/radutmp 2009-04-07 11:13:56.000000000 -0700
@@ -12,7 +12,7 @@
# Where the file is stored. It's not a log file,
# so it doesn't need rotating.
#
- filename = ${logdir}/radutmp
+ filename = ${radacctdir}/radutmp
# The field in the packet to key on for the
# 'user' name, If you have other fields which you want
diff -Naur freeradius-server-2.1.4/raddb/modules/sradutmp freeradius-server-2.1.4.new/raddb/modules/sradutmp
--- freeradius-server-2.1.4/raddb/modules/sradutmp 2009-03-10 19:26:50.000000000 -0700
+++ freeradius-server-2.1.4.new/raddb/modules/sradutmp 2009-04-07 11:14:07.000000000 -0700
@@ -10,7 +10,7 @@
# then name "sradutmp" to identify it later in the "accounting"
# section.
radutmp sradutmp {
- filename = ${logdir}/sradutmp
+ filename = ${radacctdir}/sradutmp
perm = 0644
callerid = "no"
}
diff -Naur freeradius-server-2.1.4/raddb/preproxy_users freeradius-server-2.1.4.new/raddb/preproxy_users
--- freeradius-server-2.1.4/raddb/preproxy_users 2009-03-10 19:26:50.000000000 -0700
+++ freeradius-server-2.1.4.new/raddb/preproxy_users 2009-04-07 15:23:02.000000000 -0700
@@ -1,6 +1,5 @@
#
# Configuration file for the rlm_files module.
-# Please see rlm_files(5) manpage for more information.
#
# $Id$
#
diff -Naur freeradius-server-2.1.4/raddb/proxy.conf freeradius-server-2.1.4.new/raddb/proxy.conf
--- freeradius-server-2.1.4/raddb/proxy.conf 2009-03-10 19:26:50.000000000 -0700
+++ freeradius-server-2.1.4.new/raddb/proxy.conf 2009-04-07 15:22:45.000000000 -0700
@@ -525,9 +525,8 @@
# This section defines a new-style "realm". Note the in version 2.0,
# there are many fewer configuration items than in 1.x for a realm.
#
-# Automatic proxying is done via the "realms" module (see "man
-# rlm_realm"). To manually proxy the request put this entry in the
-# "users" file:
+# Automatic proxying is done via the "realms" module.
+# To manually proxy the request put this entry in the "users" file:
#
#
diff -Naur freeradius-server-2.1.4/raddb/radiusd.conf.in freeradius-server-2.1.4.new/raddb/radiusd.conf.in
--- freeradius-server-2.1.4/raddb/radiusd.conf.in 2009-03-10 19:26:50.000000000 -0700
+++ freeradius-server-2.1.4.new/raddb/radiusd.conf.in 2009-04-07 15:34:38.000000000 -0700
@@ -8,11 +8,6 @@
######################################################################
#
-# Read "man radiusd" before editing this file. See the section
-# titled DEBUGGING. It outlines a method where you can quickly
-# obtain the configuration you want, without running into
-# trouble.
-#
# Run the server in debugging mode, and READ the output.
#
# $ radiusd -X
@@ -41,14 +36,8 @@
# file, it is exported through the API to modules that ask for
# it.
#
-# See "man radiusd.conf" for documentation on the format of this
-# file. Note that the individual configuration items are NOT
-# documented in that "man" page. They are only documented here,
-# in the comments.
-#
# As of 2.0.0, FreeRADIUS supports a simple processing language
# in the "authorize", "authenticate", "accounting", etc. sections.
-# See "man unlang" for details.
#
prefix = @prefix@
@@ -66,7 +55,7 @@
# Location of config and logfiles.
confdir = ${raddbdir}
-run_dir = ${localstatedir}/run/${name}
+run_dir = ${localstatedir}/run
# Should likely be ${localstatedir}/lib/radiusd
db_dir = ${raddbdir}
@@ -112,7 +101,7 @@
#
# This file is written when ONLY running in daemon mode.
#
-# e.g.: kill -HUP `cat /var/run/radiusd/radiusd.pid`
+# e.g.: kill -HUP `cat /var/run/radiusd.pid`
#
pidfile = ${run_dir}/${name}.pid
@@ -283,7 +272,7 @@
# If your system does not support this feature, you will
# get an error if you try to use it.
#
-# interface = eth0
+ interface = br-lan
# Per-socket lists of clients. This is a very useful feature.
#
@@ -310,7 +299,7 @@
# ipv6addr = ::
port = 0
type = acct
-# interface = eth0
+ interface = br-lan
# clients = per_socket_clients
}
@@ -445,9 +434,6 @@
auth_goodpass = no
}
-# The program to execute to do concurrency checks.
-checkrad = ${sbindir}/checkrad
-
# SECURITY CONFIGURATION
#
# There may be multiple methods of attacking on the server. This
@@ -522,8 +508,8 @@
#
# allowed values: {no, yes}
#
-proxy_requests = yes
-$INCLUDE proxy.conf
+proxy_requests = no
+#$INCLUDE proxy.conf
# CLIENTS CONFIGURATION
@@ -675,10 +661,6 @@
#
# $INCLUDE sql/mysql/counter.conf
- #
- # IP addresses managed in an SQL table.
- #
-# $INCLUDE sqlippool.conf
}
# Instantiation
@@ -703,7 +685,7 @@
# The entire command line (and output) must fit into 253 bytes.
#
# e.g. Framed-Pool = `%{exec:/bin/echo foo}`
- exec
+# exec
#
# The expression module doesn't do authorization,
@@ -716,15 +698,15 @@
# listed in any other section. See 'doc/rlm_expr' for
# more information.
#
- expr
+# expr
#
# We add the counter module here so that it registers
# the check-name attribute before any module which sets
# it
# daily
- expiration
- logintime
+# expiration
+# logintime
# subsections here can be thought of as "virtual" modules.
#
@@ -748,7 +730,7 @@
# to multiple times.
#
######################################################################
-$INCLUDE policy.conf
+#$INCLUDE policy.conf
######################################################################
#
@@ -758,9 +740,9 @@
# match the regular expression: /[a-zA-Z0-9_.]+/
#
# It allows you to define new virtual servers simply by placing
-# a file into the raddb/sites-enabled/ directory.
+# a file into the /etc/freeradius2/sites/ directory.
#
-$INCLUDE sites-enabled/
+$INCLUDE sites/
######################################################################
#
@@ -768,15 +750,11 @@
# "authenticate {}", "accounting {}", have been moved to the
# the file:
#
-# raddb/sites-available/default
+# /etc/freeradius2/sites/default
#
# This is the "default" virtual server that has the same
# configuration as in version 1.0.x and 1.1.x. The default
# installation enables this virtual server. You should
# edit it to create policies for your local site.
#
-# For more documentation on virtual servers, see:
-#
-# raddb/sites-available/README
-#
######################################################################
diff -Naur freeradius-server-2.1.4/raddb/sites-available/default freeradius-server-2.1.4.new/raddb/sites-available/default
--- freeradius-server-2.1.4/raddb/sites-available/default 2009-03-10 19:26:50.000000000 -0700
+++ freeradius-server-2.1.4.new/raddb/sites-available/default 2009-04-07 15:27:12.000000000 -0700
@@ -11,12 +11,6 @@
#
######################################################################
#
-# Read "man radiusd" before editing this file. See the section
-# titled DEBUGGING. It outlines a method where you can quickly
-# obtain the configuration you want, without running into
-# trouble. See also "man unlang", which documents the format
-# of this file.
-#
# This configuration is designed to work in the widest possible
# set of circumstances, with the widest possible number of
# authentication methods. This means that in general, you should
@@ -69,7 +63,7 @@
# 'raddb/huntgroups' files.
#
# It also adds the %{Client-IP-Address} attribute to the request.
- preprocess
+# preprocess
#
# If you want to have a log of authentication requests,
@@ -80,7 +74,7 @@
#
# The chap module will set 'Auth-Type := CHAP' if we are
# handling a CHAP request and Auth-Type has not already been set
- chap
+# chap
#
# If the users are logging in with an MS-CHAP-Challenge
@@ -88,13 +82,7 @@
# the MS-CHAP-Challenge attribute, and add 'Auth-Type := MS-CHAP'
# to the request, which will cause the server to then use
# the mschap module for authentication.
- mschap
-
- #
- # If you have a Cisco SIP server authenticating against
- # FreeRADIUS, uncomment the following line, and the 'digest'
- # line in the 'authenticate' section.
-# digest
+# mschap
#
# Look for IPASS style 'realm/', and if not found, look for
@@ -108,7 +96,7 @@
# Otherwise, when the first style of realm doesn't match,
# the other styles won't be checked.
#
- suffix
+# suffix
# ntdomain
#
@@ -133,14 +121,6 @@
}
#
- # Pull crypt'd passwords from /etc/passwd or /etc/shadow,
- # using the system API's to get the password. If you want
- # to read /etc/passwd or /etc/shadow directly, see the
- # passwd module in radiusd.conf.
- #
- unix
-
- #
# Read the 'users' file
files
@@ -152,28 +132,11 @@
# sql
#
- # If you are using /etc/smbpasswd, and are also doing
- # mschap authentication, the un-comment this line, and
- # configure the 'etc_smbpasswd' module, above.
-# etc_smbpasswd
-
- #
# The ldap module will set Auth-Type to LDAP if it has not
# already been set
# ldap
#
- # Enforce daily limits on time spent logged in.
-# daily
-
- #
- # Use the checkval module
-# checkval
-
- expiration
- logintime
-
- #
# If no other module has claimed responsibility for
# authentication, then try to use PAP. This allows the
# other modules listed above to add a "known good" password
@@ -248,24 +211,6 @@
mschap
}
- #
- # If you have a Cisco SIP server authenticating against
- # FreeRADIUS, uncomment the following line, and the 'digest'
- # line in the 'authorize' section.
-# digest
-
- #
- # Pluggable Authentication Modules.
-# pam
-
- #
- # See 'man getpwent' for information on how the 'unix'
- # module checks the users password. Note that packets
- # containing CHAP-Password attributes CANNOT be authenticated
- # against /etc/passwd! See the FAQ for details.
- #
- unix
-
# Uncomment it if you want to use ldap for authentication
#
# Note that this means "check plain-text password against
@@ -278,19 +223,15 @@
#
# Allow EAP authentication.
eap
+ pap
}
#
# Pre-accounting. Decide which accounting type to use.
#
-preacct {
- preprocess
-
- #
- # Ensure that we have a semi-unique identifier for every
- # request, and many NAS boxes are broken.
- acct_unique
+#preacct {
+# preprocess
#
# Look for IPASS-style 'realm/', and if not found, look for
@@ -300,13 +241,13 @@
# Accounting requests are generally proxied to the same
# home server as authentication requests.
# IPASS
- suffix
+# suffix
# ntdomain
#
# Read the 'acct_users' file
- files
-}
+# files
+#}
#
# Accounting. Log the accounting data.
@@ -316,14 +257,9 @@
# Create a 'detail'ed log of the packets.
# Note that accounting requests which are proxied
# are also logged in the detail file.
- detail
+# detail
# daily
- # Update the wtmp file
- #
- # If you don't use "radlast", you can delete this line.
- unix
-
#
# For Simultaneous-Use tracking.
#
@@ -332,9 +268,6 @@
radutmp
# sradutmp
- # Return an address to the IP Pool when we see a stop record.
-# main_pool
-
#
# Log traffic to an SQL database.
#
@@ -351,7 +284,7 @@
# pgsql-voip
# Filter attributes from the accounting response.
- attr_filter.accounting_response
+ #attr_filter.accounting_response
#
# See "Autz-Type Status-Server" for how this works.
@@ -377,10 +310,7 @@
# Post-Authentication
# Once we KNOW that the user has been authenticated, there are
# additional steps we can take.
-post-auth {
- # Get an address from the IP Pool.
-# main_pool
-
+#post-auth {
#
# If you want to have a log of authentication replies,
# un-comment the following line, and the 'detail reply_log'
@@ -406,7 +336,7 @@
#
# ldap
- exec
+# exec
#
# Access-Reject packets are sent through the REJECT sub-section of the
@@ -415,10 +345,10 @@
# Add the ldap module name (or instance) if you have set
# 'edir_account_policy_check = yes' in the ldap module configuration
#
- Post-Auth-Type REJECT {
- attr_filter.access_reject
- }
-}
+# Post-Auth-Type REJECT {
+# attr_filter.access_reject
+# }
+#}
#
# When the server decides to proxy a request to a home server,
@@ -428,7 +358,7 @@
#
# Only a few modules currently have this method.
#
-pre-proxy {
+#pre-proxy {
# attr_rewrite
# Uncomment the following line if you want to change attributes
@@ -444,14 +374,14 @@
# server, un-comment the following line, and the
# 'detail pre_proxy_log' section, above.
# pre_proxy_log
-}
+#}
#
# When the server receives a reply to a request it proxied
# to a home server, the request may be massaged here, in the
# post-proxy stage.
#
-post-proxy {
+#post-proxy {
# If you want to have a log of replies from a home server,
# un-comment the following line, and the 'detail post_proxy_log'
@@ -475,7 +405,7 @@
# hidden inside of the EAP packet, and the end server will
# reject the EAP request.
#
- eap
+# eap
#
# If the server tries to proxy a request and fails, then the
@@ -497,6 +427,5 @@
# Post-Proxy-Type Fail {
# detail
# }
-
-}
+#}
diff -Naur freeradius-server-2.1.4/raddb/users freeradius-server-2.1.4.new/raddb/users
--- freeradius-server-2.1.4/raddb/users 2009-03-10 19:26:50.000000000 -0700
+++ freeradius-server-2.1.4.new/raddb/users 2009-04-07 15:23:54.000000000 -0700
@@ -1,6 +1,5 @@
#
-# Please read the documentation file ../doc/processing_users_file,
-# or 'man 5 users' (after installing the server) for more information.
+# Please read the documentation file ../doc/processing_users_file.
#
# This file contains authentication security and configuration
# information for each user. Accounting requests are NOT processed
@@ -169,22 +168,22 @@
# by the terminal server in which case there may not be a "P" suffix.
# The terminal server sends "Framed-Protocol = PPP" for auto PPP.
#
-DEFAULT Framed-Protocol == PPP
- Framed-Protocol = PPP,
- Framed-Compression = Van-Jacobson-TCP-IP
+#DEFAULT Framed-Protocol == PPP
+# Framed-Protocol = PPP,
+# Framed-Compression = Van-Jacobson-TCP-IP
#
# Default for CSLIP: dynamic IP address, SLIP mode, VJ-compression.
#
-DEFAULT Hint == "CSLIP"
- Framed-Protocol = SLIP,
- Framed-Compression = Van-Jacobson-TCP-IP
+#DEFAULT Hint == "CSLIP"
+# Framed-Protocol = SLIP,
+# Framed-Compression = Van-Jacobson-TCP-IP
#
# Default for SLIP: dynamic IP address, SLIP mode.
#
-DEFAULT Hint == "SLIP"
- Framed-Protocol = SLIP
+#DEFAULT Hint == "SLIP"
+# Framed-Protocol = SLIP
#
# Last default: rlogin to our main server.