--- /dev/null
+++ b/mibs/BGP4-MIB.txt
@@ -0,0 +1,929 @@
+ BGP4-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+ IpAddress, Integer32, Counter32, Gauge32, mib-2
+ FROM SNMPv2-SMI
+ MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+ FROM SNMPv2-CONF;
+
+ bgp MODULE-IDENTITY
+ LAST-UPDATED "9902100000Z"
+ ORGANIZATION "IETF IDR Working Group"
+ CONTACT-INFO "E-mail: idr@merit.net
+
+ Susan Hares (Editor)
+ Merit Network
+ 4251 Plymouth Road
+ Suite C
+ Ann Arbor, MI 48105-2785
+ Tel: +1 734 936 2095
+ Fax: +1 734 647 3185
+ E-mail: skh@merit.edu
+
+ Jeff Johnson (Editor)
+ RedBack Networks, Inc.
+ 1389 Moffett Park Drive
+ Sunnyvale, CA 94089-1134
+ Tel: +1 408 548 3516
+ Fax: +1 408 548 3599
+ E-mail: jeff@redback.com"
+ DESCRIPTION
+ "The MIB module for BGP-4."
+ REVISION "9902100000Z"
+ DESCRIPTION
+ "Corrected duplicate OBJECT IDENTIFIER
+ assignment in the conformance information."
+ REVISION "9601080000Z"
+ DESCRIPTION
+ "1) Fixed the definitions of the traps to
+ make them equivalent to their initial
+ definition in RFC 1269.
+ 2) Added compliance and conformance info."
+ ::= { mib-2 15 }
+
+ bgpVersion OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Vector of supported BGP protocol version
+ numbers. Each peer negotiates the version
+ from this vector. Versions are identified
+ via the string of bits contained within this
+ object. The first octet contains bits 0 to
+ 7, the second octet contains bits 8 to 15,
+ and so on, with the most significant bit
+ referring to the lowest bit number in the
+ octet (e.g., the MSB of the first octet
+ refers to bit 0). If a bit, i, is present
+ and set, then the version (i+1) of the BGP
+ is supported."
+ ::= { bgp 1 }
+
+ bgpLocalAs OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The local autonomous system number."
+ ::= { bgp 2 }
+
+
+
+ -- BGP Peer table. This table contains, one entry per BGP
+ -- peer, information about the BGP peer.
+
+ bgpPeerTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BgpPeerEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "BGP peer table. This table contains,
+ one entry per BGP peer, information about the
+ connections with BGP peers."
+ ::= { bgp 3 }
+
+ bgpPeerEntry OBJECT-TYPE
+ SYNTAX BgpPeerEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry containing information about the
+ connection with a BGP peer."
+ INDEX { bgpPeerRemoteAddr }
+ ::= { bgpPeerTable 1 }
+
+ BgpPeerEntry ::= SEQUENCE {
+ bgpPeerIdentifier
+ IpAddress,
+ bgpPeerState
+ INTEGER,
+ bgpPeerAdminStatus
+ INTEGER,
+ bgpPeerNegotiatedVersion
+ Integer32,
+ bgpPeerLocalAddr
+ IpAddress,
+ bgpPeerLocalPort
+ INTEGER,
+ bgpPeerRemoteAddr
+ IpAddress,
+ bgpPeerRemotePort
+ INTEGER,
+ bgpPeerRemoteAs
+ INTEGER,
+ bgpPeerInUpdates
+ Counter32,
+ bgpPeerOutUpdates
+ Counter32,
+ bgpPeerInTotalMessages
+ Counter32,
+ bgpPeerOutTotalMessages
+ Counter32,
+ bgpPeerLastError
+ OCTET STRING,
+ bgpPeerFsmEstablishedTransitions
+ Counter32,
+ bgpPeerFsmEstablishedTime
+ Gauge32,
+ bgpPeerConnectRetryInterval
+ INTEGER,
+ bgpPeerHoldTime
+ INTEGER,
+ bgpPeerKeepAlive
+ INTEGER,
+ bgpPeerHoldTimeConfigured
+ INTEGER,
+ bgpPeerKeepAliveConfigured
+ INTEGER,
+ bgpPeerMinASOriginationInterval
+ INTEGER,
+ bgpPeerMinRouteAdvertisementInterval
+ INTEGER,
+ bgpPeerInUpdateElapsedTime
+ Gauge32
+ }
+
+ bgpPeerIdentifier OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The BGP Identifier of this entry's BGP peer."
+ ::= { bgpPeerEntry 1 }
+
+ bgpPeerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ idle(1),
+ connect(2),
+ active(3),
+ opensent(4),
+ openconfirm(5),
+ established(6)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The BGP peer connection state."
+ ::= { bgpPeerEntry 2 }
+
+ bgpPeerAdminStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ stop(1),
+ start(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The desired state of the BGP connection. A
+ transition from 'stop' to 'start' will cause
+ the BGP Start Event to be generated. A
+ transition from 'start' to 'stop' will cause
+ the BGP Stop Event to be generated. This
+ parameter can be used to restart BGP peer
+ connections. Care should be used in providing
+ write access to this object without adequate
+ authentication."
+ ::= { bgpPeerEntry 3 }
+
+ bgpPeerNegotiatedVersion OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The negotiated version of BGP running between
+ the two peers."
+ ::= { bgpPeerEntry 4 }
+
+ bgpPeerLocalAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The local IP address of this entry's BGP
+ connection."
+ ::= { bgpPeerEntry 5 }
+
+ bgpPeerLocalPort OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The local port for the TCP connection between
+ the BGP peers."
+ ::= { bgpPeerEntry 6 }
+
+ bgpPeerRemoteAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The remote IP address of this entry's BGP
+ peer."
+ ::= { bgpPeerEntry 7 }
+
+ bgpPeerRemotePort OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The remote port for the TCP connection between
+ the BGP peers. Note that the objects
+ bgpPeerLocalAddr, bgpPeerLocalPort,
+ bgpPeerRemoteAddr and bgpPeerRemotePort
+ provide the appropriate reference to the
+ standard MIB TCP connection table."
+ ::= { bgpPeerEntry 8 }
+
+ bgpPeerRemoteAs OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The remote autonomous system number."
+ ::= { bgpPeerEntry 9 }
+
+ bgpPeerInUpdates OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of BGP UPDATE messages received on
+ this connection. This object should be
+ initialized to zero (0) when the connection is
+ established."
+ ::= { bgpPeerEntry 10 }
+
+ bgpPeerOutUpdates OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of BGP UPDATE messages transmitted
+ on this connection. This object should be
+ initialized to zero (0) when the connection is
+ established."
+ ::= { bgpPeerEntry 11 }
+
+ bgpPeerInTotalMessages OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of messages received from the
+ remote peer on this connection. This object
+ should be initialized to zero when the
+ connection is established."
+ ::= { bgpPeerEntry 12 }
+
+ bgpPeerOutTotalMessages OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of messages transmitted to
+ the remote peer on this connection. This object
+ should be initialized to zero when the
+ connection is established."
+ ::= { bgpPeerEntry 13 }
+
+ bgpPeerLastError OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (2))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last error code and subcode seen by this
+ peer on this connection. If no error has
+ occurred, this field is zero. Otherwise, the
+ first byte of this two byte OCTET STRING
+ contains the error code, and the second byte
+ contains the subcode."
+ ::= { bgpPeerEntry 14 }
+
+ bgpPeerFsmEstablishedTransitions OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of times the BGP FSM
+ transitioned into the established state."
+ ::= { bgpPeerEntry 15 }
+
+ bgpPeerFsmEstablishedTime OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This timer indicates how long (in seconds) this
+ peer has been in the Established state or how long
+ since this peer was last in the Established state.
+ It is set to zero when a new peer is configured or
+ the router is booted."
+ ::= { bgpPeerEntry 16 }
+
+ bgpPeerConnectRetryInterval OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Time interval in seconds for the ConnectRetry
+ timer. The suggested value for this timer is
+ 120 seconds."
+ ::= { bgpPeerEntry 17 }
+
+ bgpPeerHoldTime OBJECT-TYPE
+ SYNTAX INTEGER ( 0 | 3..65535 )
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Time interval in seconds for the Hold Timer
+ established with the peer. The value of this
+ object is calculated by this BGP speaker by
+ using the smaller of the value in
+ bgpPeerHoldTimeConfigured and the Hold Time
+ received in the OPEN message. This value
+ must be at lease three seconds if it is not
+ zero (0) in which case the Hold Timer has
+ not been established with the peer, or, the
+ value of bgpPeerHoldTimeConfigured is zero (0)."
+ ::= { bgpPeerEntry 18 }
+
+ bgpPeerKeepAlive OBJECT-TYPE
+ SYNTAX INTEGER ( 0 | 1..21845 )
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Time interval in seconds for the KeepAlive
+ timer established with the peer. The value of
+ this object is calculated by this BGP speaker
+ such that, when compared with bgpPeerHoldTime,
+ it has the same proportion as what
+ bgpPeerKeepAliveConfigured has when compared
+ with bgpPeerHoldTimeConfigured. If the value
+ of this object is zero (0), it indicates that
+ the KeepAlive timer has not been established
+ with the peer, or, the value of
+ bgpPeerKeepAliveConfigured is zero (0)."
+ ::= { bgpPeerEntry 19 }
+
+ bgpPeerHoldTimeConfigured OBJECT-TYPE
+ SYNTAX INTEGER ( 0 | 3..65535 )
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Time interval in seconds for the Hold Time
+ configured for this BGP speaker with this peer.
+ This value is placed in an OPEN message sent to
+ this peer by this BGP speaker, and is compared
+ with the Hold Time field in an OPEN message
+ received from the peer when determining the Hold
+ Time (bgpPeerHoldTime) with the peer. This value
+ must not be less than three seconds if it is not
+ zero (0) in which case the Hold Time is NOT to be
+ established with the peer. The suggested value for
+ this timer is 90 seconds."
+ ::= { bgpPeerEntry 20 }
+
+ bgpPeerKeepAliveConfigured OBJECT-TYPE
+ SYNTAX INTEGER ( 0 | 1..21845 )
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Time interval in seconds for the KeepAlive timer
+ configured for this BGP speaker with this peer.
+ The value of this object will only determine the
+ KEEPALIVE messages' frequency relative to the value
+ specified in bgpPeerHoldTimeConfigured; the actual
+ time interval for the KEEPALIVE messages is
+ indicated by bgpPeerKeepAlive. A reasonable
+ maximum value for this timer would be configured to
+ be one third of that of bgpPeerHoldTimeConfigured.
+ If the value of this object is zero (0), no
+ periodical KEEPALIVE messages are sent to the peer
+ after the BGP connection has been established. The
+ suggested value for this timer is 30 seconds."
+ ::= { bgpPeerEntry 21 }
+
+ bgpPeerMinASOriginationInterval OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Time interval in seconds for the
+ MinASOriginationInterval timer.
+ The suggested value for this timer is 15 seconds."
+ ::= { bgpPeerEntry 22 }
+
+ bgpPeerMinRouteAdvertisementInterval OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Time interval in seconds for the
+ MinRouteAdvertisementInterval timer.
+ The suggested value for this timer is 30 seconds."
+ ::= { bgpPeerEntry 23 }
+
+ bgpPeerInUpdateElapsedTime OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Elapsed time in seconds since the last BGP
+ UPDATE message was received from the peer.
+ Each time bgpPeerInUpdates is incremented,
+ the value of this object is set to zero (0)."
+ ::= { bgpPeerEntry 24 }
+
+
+
+ bgpIdentifier OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The BGP Identifier of local system."
+ ::= { bgp 4 }
+
+
+
+ -- Received Path Attribute Table. This table contains,
+ -- one entry per path to a network, path attributes
+ -- received from all peers running BGP version 3 or less.
+ -- This table is obsolete, having been replaced in
+ -- functionality with the bgp4PathAttrTable.
+
+ bgpRcvdPathAttrTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BgpPathAttrEntry
+ MAX-ACCESS not-accessible
+ STATUS obsolete
+ DESCRIPTION
+ "The BGP Received Path Attribute Table contains
+ information about paths to destination networks
+ received from all peers running BGP version 3 or
+ less."
+ ::= { bgp 5 }
+
+ bgpPathAttrEntry OBJECT-TYPE
+ SYNTAX BgpPathAttrEntry
+ MAX-ACCESS not-accessible
+ STATUS obsolete
+ DESCRIPTION
+ "Information about a path to a network."
+ INDEX { bgpPathAttrDestNetwork,
+ bgpPathAttrPeer }
+ ::= { bgpRcvdPathAttrTable 1 }
+
+ BgpPathAttrEntry ::= SEQUENCE {
+ bgpPathAttrPeer
+ IpAddress,
+ bgpPathAttrDestNetwork
+ IpAddress,
+ bgpPathAttrOrigin
+ INTEGER,
+ bgpPathAttrASPath
+ OCTET STRING,
+ bgpPathAttrNextHop
+ IpAddress,
+ bgpPathAttrInterASMetric
+ Integer32
+ }
+
+ bgpPathAttrPeer OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+ "The IP address of the peer where the path
+ information was learned."
+ ::= { bgpPathAttrEntry 1 }
+
+ bgpPathAttrDestNetwork OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+ "The address of the destination network."
+ ::= { bgpPathAttrEntry 2 }
+
+ bgpPathAttrOrigin OBJECT-TYPE
+ SYNTAX INTEGER {
+ igp(1),-- networks are interior
+ egp(2),-- networks learned via EGP
+ incomplete(3) -- undetermined
+ }
+ MAX-ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+ "The ultimate origin of the path information."
+ ::= { bgpPathAttrEntry 3 }
+
+ bgpPathAttrASPath OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (2..255))
+ MAX-ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+ "The set of ASs that must be traversed to reach
+ the network. This object is probably best
+ represented as SEQUENCE OF INTEGER. For SMI
+ compatibility, though, it is represented as
+ OCTET STRING. Each AS is represented as a pair
+ of octets according to the following algorithm:
+
+ first-byte-of-pair = ASNumber / 256;
+ second-byte-of-pair = ASNumber & 255;"
+ ::= { bgpPathAttrEntry 4 }
+
+ bgpPathAttrNextHop OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+ "The address of the border router that should
+ be used for the destination network."
+ ::= { bgpPathAttrEntry 5 }
+
+ bgpPathAttrInterASMetric OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+ "The optional inter-AS metric. If this
+ attribute has not been provided for this route,
+ the value for this object is 0."
+ ::= { bgpPathAttrEntry 6 }
+
+
+
+ -- BGP-4 Received Path Attribute Table. This table contains,
+ -- one entry per path to a network, path attributes
+ -- received from all peers running BGP-4.
+
+ bgp4PathAttrTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Bgp4PathAttrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The BGP-4 Received Path Attribute Table contains
+ information about paths to destination networks
+ received from all BGP4 peers."
+ ::= { bgp 6 }
+
+ bgp4PathAttrEntry OBJECT-TYPE
+ SYNTAX Bgp4PathAttrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about a path to a network."
+ INDEX { bgp4PathAttrIpAddrPrefix,
+ bgp4PathAttrIpAddrPrefixLen,
+ bgp4PathAttrPeer }
+ ::= { bgp4PathAttrTable 1 }
+
+ Bgp4PathAttrEntry ::= SEQUENCE {
+ bgp4PathAttrPeer
+ IpAddress,
+ bgp4PathAttrIpAddrPrefixLen
+ INTEGER,
+ bgp4PathAttrIpAddrPrefix
+ IpAddress,
+ bgp4PathAttrOrigin
+ INTEGER,
+ bgp4PathAttrASPathSegment
+ OCTET STRING,
+ bgp4PathAttrNextHop
+ IpAddress,
+ bgp4PathAttrMultiExitDisc
+ INTEGER,
+ bgp4PathAttrLocalPref
+ INTEGER,
+ bgp4PathAttrAtomicAggregate
+ INTEGER,
+ bgp4PathAttrAggregatorAS
+ INTEGER,
+ bgp4PathAttrAggregatorAddr
+ IpAddress,
+ bgp4PathAttrCalcLocalPref
+ INTEGER,
+ bgp4PathAttrBest
+ INTEGER,
+ bgp4PathAttrUnknown
+ OCTET STRING
+ }
+
+ bgp4PathAttrPeer OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP address of the peer where the path
+ information was learned."
+ ::= { bgp4PathAttrEntry 1 }
+ bgp4PathAttrIpAddrPrefixLen OBJECT-TYPE
+ SYNTAX INTEGER (0..32)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Length in bits of the IP address prefix in the
+ Network Layer Reachability Information field."
+ ::= { bgp4PathAttrEntry 2 }
+
+ bgp4PathAttrIpAddrPrefix OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An IP address prefix in the Network Layer
+ Reachability Information field. This object
+ is an IP address containing the prefix with
+ length specified by bgp4PathAttrIpAddrPrefixLen.
+ Any bits beyond the length specified by
+ bgp4PathAttrIpAddrPrefixLen are zeroed."
+ ::= { bgp4PathAttrEntry 3 }
+
+ bgp4PathAttrOrigin OBJECT-TYPE
+ SYNTAX INTEGER {
+ igp(1),-- networks are interior
+ egp(2),-- networks learned via EGP
+ incomplete(3) -- undetermined
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The ultimate origin of the path information."
+ ::= { bgp4PathAttrEntry 4 }
+
+ bgp4PathAttrASPathSegment OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (2..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The sequence of AS path segments. Each AS
+ path segment is represented by a triple
+ <type, length, value>.
+
+ The type is a 1-octet field which has two
+ possible values:
+ 1 AS_SET: unordered set of ASs a
+ route in the UPDATE message
+ has traversed
+ 2 AS_SEQUENCE: ordered set of ASs
+ a route in the UPDATE message
+ has traversed.
+
+ The length is a 1-octet field containing the
+ number of ASs in the value field.
+
+ The value field contains one or more AS
+ numbers, each AS is represented in the octet
+ string as a pair of octets according to the
+ following algorithm:
+
+ first-byte-of-pair = ASNumber / 256;
+ second-byte-of-pair = ASNumber & 255;"
+ ::= { bgp4PathAttrEntry 5 }
+
+ bgp4PathAttrNextHop OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The address of the border router that should
+ be used for the destination network."
+ ::= { bgp4PathAttrEntry 6 }
+
+ bgp4PathAttrMultiExitDisc OBJECT-TYPE
+ SYNTAX INTEGER (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This metric is used to discriminate between
+ multiple exit points to an adjacent autonomous
+ system. A value of -1 indicates the absence of
+ this attribute."
+ ::= { bgp4PathAttrEntry 7 }
+
+ bgp4PathAttrLocalPref OBJECT-TYPE
+ SYNTAX INTEGER (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The originating BGP4 speaker's degree of
+ preference for an advertised route. A value of
+ -1 indicates the absence of this attribute."
+ ::= { bgp4PathAttrEntry 8 }
+
+ bgp4PathAttrAtomicAggregate OBJECT-TYPE
+ SYNTAX INTEGER {
+ lessSpecificRrouteNotSelected(1),
+ lessSpecificRouteSelected(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Whether or not a system has selected
+ a less specific route without selecting a
+ more specific route."
+ ::= { bgp4PathAttrEntry 9 }
+
+ bgp4PathAttrAggregatorAS OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The AS number of the last BGP4 speaker that
+ performed route aggregation. A value of zero (0)
+ indicates the absence of this attribute."
+ ::= { bgp4PathAttrEntry 10 }
+
+ bgp4PathAttrAggregatorAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP address of the last BGP4 speaker that
+ performed route aggregation. A value of
+ 0.0.0.0 indicates the absence of this attribute."
+ ::= { bgp4PathAttrEntry 11 }
+
+ bgp4PathAttrCalcLocalPref OBJECT-TYPE
+ SYNTAX INTEGER (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The degree of preference calculated by the
+ receiving BGP4 speaker for an advertised route.
+ A value of -1 indicates the absence of this
+ attribute."
+ ::= { bgp4PathAttrEntry 12 }
+
+ bgp4PathAttrBest OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(1),-- not chosen as best route
+ true(2) -- chosen as best route
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An indication of whether or not this route
+ was chosen as the best BGP4 route."
+ ::= { bgp4PathAttrEntry 13 }
+
+ bgp4PathAttrUnknown OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "One or more path attributes not understood
+ by this BGP4 speaker. Size zero (0) indicates
+ the absence of such attribute(s). Octets
+ beyond the maximum size, if any, are not
+ recorded by this object."
+ ::= { bgp4PathAttrEntry 14 }
+
+
+ -- Traps.
+
+ -- note that in RFC 1657, bgpTraps was incorrectly
+ -- assigned a value of { bgp 7 }, and each of the
+ -- traps had the bgpPeerRemoteAddr object inappropriately
+ -- removed from their OBJECTS clause. The following
+ -- definitions restore the semantics of the traps as
+ -- they were initially defined in RFC 1269.
+
+ -- { bgp 7 } is unused
+
+ bgpTraps OBJECT IDENTIFIER ::= { bgp 0 }
+
+ bgpEstablished NOTIFICATION-TYPE
+ OBJECTS { bgpPeerRemoteAddr,
+ bgpPeerLastError,
+ bgpPeerState }
+ STATUS current
+ DESCRIPTION
+ "The BGP Established event is generated when
+ the BGP FSM enters the ESTABLISHED state."
+ ::= { bgpTraps 1 }
+
+ bgpBackwardTransition NOTIFICATION-TYPE
+ OBJECTS { bgpPeerRemoteAddr,
+ bgpPeerLastError,
+ bgpPeerState }
+ STATUS current
+ DESCRIPTION
+ "The BGPBackwardTransition Event is generated
+ when the BGP FSM moves from a higher numbered
+ state to a lower numbered state."
+ ::= { bgpTraps 2 }
+
+ -- conformance information
+
+ bgpMIBConformance OBJECT IDENTIFIER ::= { bgp 8 }
+ bgpMIBCompliances OBJECT IDENTIFIER ::= { bgpMIBConformance 1 }
+ bgpMIBGroups OBJECT IDENTIFIER ::= { bgpMIBConformance 2 }
+
+ -- compliance statements
+
+ bgpMIBCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for entities which
+ implement the BGP4 mib."
+ MODULE -- this module
+ MANDATORY-GROUPS { bgp4MIBGlobalsGroup,
+ bgp4MIBPeerGroup,
+ bgp4MIBPathAttrGroup,
+ bgp4MIBNotificationGroup }
+ ::= { bgpMIBCompliances 1 }
+
+ -- units of conformance
+
+ bgp4MIBGlobalsGroup OBJECT-GROUP
+ OBJECTS { bgpVersion,
+ bgpLocalAs,
+ bgpIdentifier }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information
+ on global BGP state."
+ ::= { bgpMIBGroups 1 }
+
+ bgp4MIBPeerGroup OBJECT-GROUP
+ OBJECTS { bgpPeerIdentifier,
+ bgpPeerState,
+ bgpPeerAdminStatus,
+ bgpPeerNegotiatedVersion,
+ bgpPeerLocalAddr,
+ bgpPeerLocalPort,
+ bgpPeerRemoteAddr,
+ bgpPeerRemotePort,
+ bgpPeerRemoteAs,
+ bgpPeerInUpdates,
+ bgpPeerOutUpdates,
+ bgpPeerInTotalMessages,
+ bgpPeerOutTotalMessages,
+ bgpPeerLastError,
+ bgpPeerFsmEstablishedTransitions,
+ bgpPeerFsmEstablishedTime,
+ bgpPeerConnectRetryInterval,
+ bgpPeerHoldTime,
+ bgpPeerKeepAlive,
+ bgpPeerHoldTimeConfigured,
+ bgpPeerKeepAliveConfigured,
+ bgpPeerMinASOriginationInterval,
+ bgpPeerMinRouteAdvertisementInterval,
+ bgpPeerInUpdateElapsedTime }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects for managing
+ BGP peers."
+ ::= { bgpMIBGroups 2 }
+
+ bgp4MIBRcvdPathAttrGroup OBJECT-GROUP
+ OBJECTS { bgpPathAttrPeer,
+ bgpPathAttrDestNetwork,
+ bgpPathAttrOrigin,
+ bgpPathAttrASPath,
+ bgpPathAttrNextHop,
+ bgpPathAttrInterASMetric }
+ STATUS obsolete
+ DESCRIPTION
+ "A collection of objects for managing BGP
+ path entries.
+
+ This conformance group is obsolete,
+ replaced by bgp4MIBPathAttrGroup."
+ ::= { bgpMIBGroups 3 }
+
+ bgp4MIBPathAttrGroup OBJECT-GROUP
+ OBJECTS { bgp4PathAttrPeer,
+ bgp4PathAttrIpAddrPrefixLen,
+ bgp4PathAttrIpAddrPrefix,
+ bgp4PathAttrOrigin,
+ bgp4PathAttrASPathSegment,
+ bgp4PathAttrNextHop,
+ bgp4PathAttrMultiExitDisc,
+ bgp4PathAttrLocalPref,
+ bgp4PathAttrAtomicAggregate,
+ bgp4PathAttrAggregatorAS,
+ bgp4PathAttrAggregatorAddr,
+ bgp4PathAttrCalcLocalPref,
+ bgp4PathAttrBest,
+ bgp4PathAttrUnknown }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects for managing
+ BGP path entries."
+ ::= { bgpMIBGroups 4 }
+
+ bgp4MIBNotificationGroup NOTIFICATION-GROUP
+ NOTIFICATIONS { bgpEstablished,
+ bgpBackwardTransition }
+ STATUS current
+ DESCRIPTION
+ "A collection of notifications for signaling
+ changes in BGP peer relationships."
+ ::= { bgpMIBGroups 5 }
+
+ END
--- /dev/null
+++ b/mibs/BRIDGE-MIB.txt
@@ -0,0 +1,1075 @@
+BRIDGE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ Counter, TimeTicks
+ FROM RFC1155-SMI
+ mib-2
+ FROM RFC1213-MIB
+ OBJECT-TYPE
+ FROM RFC-1212
+ TRAP-TYPE
+ FROM RFC-1215;
+
+-- All representations of MAC addresses in this MIB Module
+-- use, as a textual convention (i.e. this convention does
+-- not affect their encoding), the data type:
+MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet address
+ -- in the
+ -- "canonical"
+ -- order
+-- defined by IEEE 802.1a, i.e., as if it were transmitted
+-- least significant bit first, even though 802.5 (in
+-- contrast to other n802.x protocols) requires MAC
+-- addresses to be transmitted most significant bit first.
+--
+-- 16-bit addresses, if needed, are represented by setting
+-- their upper 4 octets to all 0's, i.e., AAFF would be
+-- represented as 00000000AAFF.
+
+-- Similarly, all representations of Bridge-Id in this MIB
+-- Module use, as a textual convention (i.e. this
+-- convention does not affect their encoding), the data
+-- type:
+BridgeId ::= OCTET STRING (SIZE (8)) -- the
+ -- Bridge-Identifier
+ -- as used in the
+ -- Spanning Tree
+-- Protocol to uniquely identify a bridge. Its first two
+-- octets (in network byte order) contain a priority
+-- value and its last 6 octets contain the MAC address
+-- used to refer to a bridge in a unique fashion
+-- (typically, the numerically smallest MAC address
+-- of all ports on the bridge).
+
+-- Several objects in this MIB module represent values of
+-- timers used by the Spanning Tree Protocol. In this
+-- MIB, these timers have values in units of hundreths of
+-- a second (i.e. 1/100 secs).
+-- These timers, when stored in a Spanning Tree Protocol's
+-- BPDU, are in units of 1/256 seconds. Note, however,
+-- that 802.1D-1990 specifies a settable granularity of
+-- no more than 1 second for these timers. To avoid
+-- ambiguity, a data type is defined here as a textual
+-- convention and all representation of these timers
+-- in this MIB module are defined using this data type. An
+-- algorithm is also defined for converting between the
+-- different units, to ensure a timer's value is not
+-- distorted by multiple conversions.
+-- The data type is:
+
+Timeout ::= INTEGER -- a STP timer in units of 1/100 seconds
+
+-- To convert a Timeout value into a value in units of
+-- 1/256 seconds, the following algorithm should be used:
+--
+-- b = floor( (n * 256) / 100)
+--
+-- where:
+-- floor = quotient [ignore remainder]
+-- n is the value in 1/100 second units
+-- b is the value in 1/256 second units
+--
+-- To convert the value from 1/256 second units back to
+-- 1/100 seconds, the following algorithm should be used:
+--
+-- n = ceiling( (b * 100) / 256)
+--
+-- where:
+-- ceiling = quotient [if remainder is 0], or
+-- quotient + 1 [if remainder is non-zero]
+-- n is the value in 1/100 second units
+-- b is the value in 1/256 second units
+--
+-- Note: it is important that the arithmetic operations are
+-- done in the order specified (i.e., multiply first, divide
+-- second).
+
+ dot1dBridge OBJECT IDENTIFIER ::= { mib-2 17 }
+
+-- groups in the Bridge MIB
+
+dot1dBase OBJECT IDENTIFIER ::= { dot1dBridge 1 }
+
+dot1dStp OBJECT IDENTIFIER ::= { dot1dBridge 2 }
+
+dot1dSr OBJECT IDENTIFIER ::= { dot1dBridge 3 }
+-- separately documented
+
+dot1dTp OBJECT IDENTIFIER ::= { dot1dBridge 4 }
+
+dot1dStatic OBJECT IDENTIFIER ::= { dot1dBridge 5 }
+
+-- the dot1dBase group
+
+-- Implementation of the dot1dBase group is mandatory for all
+-- bridges.
+
+dot1dBaseBridgeAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The MAC address used by this bridge when it must
+ be referred to in a unique fashion. It is
+ recommended that this be the numerically smallest
+ MAC address of all ports that belong to this
+ bridge. However it is only required to be unique.
+ When concatenated with dot1dStpPriority a unique
+ BridgeIdentifier is formed which is used in the
+ Spanning Tree Protocol."
+ REFERENCE
+ "IEEE 802.1D-1990: Sections 6.4.1.1.3 and 3.12.5"
+ ::= { dot1dBase 1 }
+
+dot1dBaseNumPorts OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of ports controlled by this bridging
+ entity."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 6.4.1.1.3"
+ ::= { dot1dBase 2 }
+
+dot1dBaseType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(1),
+ transparent-only(2),
+ sourceroute-only(3),
+ srt(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates what type of bridging this bridge can
+ perform. If a bridge is actually performing a
+ certain type of bridging this will be indicated by
+ entries in the port table for the given type."
+ ::= { dot1dBase 3 }
+
+-- The Generic Bridge Port Table
+
+dot1dBasePortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Dot1dBasePortEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A table that contains generic information about
+ every port that is associated with this bridge.
+ Transparent, source-route, and srt ports are
+ included."
+ ::= { dot1dBase 4 }
+
+dot1dBasePortEntry OBJECT-TYPE
+ SYNTAX Dot1dBasePortEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A list of information for each port of the
+ bridge."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 6.4.2, 6.6.1"
+ INDEX { dot1dBasePort }
+ ::= { dot1dBasePortTable 1 }
+
+Dot1dBasePortEntry ::=
+ SEQUENCE {
+ dot1dBasePort
+ INTEGER,
+ dot1dBasePortIfIndex
+ INTEGER,
+ dot1dBasePortCircuit
+
+ OBJECT IDENTIFIER,
+ dot1dBasePortDelayExceededDiscards
+ Counter,
+ dot1dBasePortMtuExceededDiscards
+ Counter
+ }
+
+dot1dBasePort OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The port number of the port for which this entry
+ contains bridge management information."
+ ::= { dot1dBasePortEntry 1 }
+
+dot1dBasePortIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The value of the instance of the ifIndex object,
+ defined in MIB-II, for the interface corresponding
+ to this port."
+ ::= { dot1dBasePortEntry 2 }
+
+dot1dBasePortCircuit OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "For a port which (potentially) has the same value
+ of dot1dBasePortIfIndex as another port on the
+ same bridge, this object contains the name of an
+ object instance unique to this port. For example,
+ in the case where multiple ports correspond one-
+ to-one with multiple X.25 virtual circuits, this
+ value might identify an (e.g., the first) object
+ instance associated with the X.25 virtual circuit
+ corresponding to this port.
+
+ For a port which has a unique value of
+ dot1dBasePortIfIndex, this object can have the
+ value { 0 0 }."
+ ::= { dot1dBasePortEntry 3 }
+
+dot1dBasePortDelayExceededDiscards OBJECT-TYPE
+ SYNTAX Counter
+
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of frames discarded by this port due
+ to excessive transit delay through the bridge. It
+ is incremented by both transparent and source
+ route bridges."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 6.6.1.1.3"
+ ::= { dot1dBasePortEntry 4 }
+
+dot1dBasePortMtuExceededDiscards OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of frames discarded by this port due
+ to an excessive size. It is incremented by both
+ transparent and source route bridges."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 6.6.1.1.3"
+ ::= { dot1dBasePortEntry 5 }
+
+-- the dot1dStp group
+
+-- Implementation of the dot1dStp group is optional. It is
+-- implemented by those bridges that support the Spanning Tree
+-- Protocol.
+
+dot1dStpProtocolSpecification OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(1),
+ decLb100(2),
+ ieee8021d(3)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "An indication of what version of the Spanning
+ Tree Protocol is being run. The value
+ 'decLb100(2)' indicates the DEC LANbridge 100
+ Spanning Tree protocol. IEEE 802.1d
+ implementations will return 'ieee8021d(3)'. If
+ future versions of the IEEE Spanning Tree Protocol
+ are released that are incompatible with the
+ current version a new value will be defined."
+
+ ::= { dot1dStp 1 }
+
+dot1dStpPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The value of the write-able portion of the Bridge
+ ID, i.e., the first two octets of the (8 octet
+ long) Bridge ID. The other (last) 6 octets of the
+ Bridge ID are given by the value of
+ dot1dBaseBridgeAddress."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.3.7"
+ ::= { dot1dStp 2 }
+
+dot1dStpTimeSinceTopologyChange OBJECT-TYPE
+ SYNTAX TimeTicks
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The time (in hundredths of a second) since the
+ last time a topology change was detected by the
+ bridge entity."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 6.8.1.1.3"
+ ::= { dot1dStp 3 }
+
+dot1dStpTopChanges OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The total number of topology changes detected by
+ this bridge since the management entity was last
+ reset or initialized."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 6.8.1.1.3"
+ ::= { dot1dStp 4 }
+
+dot1dStpDesignatedRoot OBJECT-TYPE
+ SYNTAX BridgeId
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The bridge identifier of the root of the spanning
+ tree as determined by the Spanning Tree Protocol
+ as executed by this node. This value is used as
+
+ the Root Identifier parameter in all Configuration
+ Bridge PDUs originated by this node."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.3.1"
+ ::= { dot1dStp 5 }
+
+dot1dStpRootCost OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The cost of the path to the root as seen from
+ this bridge."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.3.2"
+ ::= { dot1dStp 6 }
+
+dot1dStpRootPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The port number of the port which offers the
+ lowest cost path from this bridge to the root
+ bridge."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.3.3"
+ ::= { dot1dStp 7 }
+
+dot1dStpMaxAge OBJECT-TYPE
+ SYNTAX Timeout
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The maximum age of Spanning Tree Protocol
+ information learned from the network on any port
+ before it is discarded, in units of hundredths of
+ a second. This is the actual value that this
+ bridge is currently using."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.3.4"
+ ::= { dot1dStp 8 }
+
+dot1dStpHelloTime OBJECT-TYPE
+ SYNTAX Timeout
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+
+ "The amount of time between the transmission of
+ Configuration bridge PDUs by this node on any port
+ when it is the root of the spanning tree or trying
+ to become so, in units of hundredths of a second.
+ This is the actual value that this bridge is
+ currently using."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.3.5"
+ ::= { dot1dStp 9 }
+
+dot1dStpHoldTime OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This time value determines the interval length
+ during which no more than two Configuration bridge
+ PDUs shall be transmitted by this node, in units
+ of hundredths of a second."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.3.14"
+ ::= { dot1dStp 10 }
+
+dot1dStpForwardDelay OBJECT-TYPE
+ SYNTAX Timeout
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This time value, measured in units of hundredths
+ of a second, controls how fast a port changes its
+ spanning state when moving towards the Forwarding
+ state. The value determines how long the port
+ stays in each of the Listening and Learning
+ states, which precede the Forwarding state. This
+ value is also used, when a topology change has
+ been detected and is underway, to age all dynamic
+ entries in the Forwarding Database. [Note that
+ this value is the one that this bridge is
+ currently using, in contrast to
+ dot1dStpBridgeForwardDelay which is the value that
+ this bridge and all others would start using
+ if/when this bridge were to become the root.]"
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.3.6"
+ ::= { dot1dStp 11 }
+
+dot1dStpBridgeMaxAge OBJECT-TYPE
+ SYNTAX Timeout (600..4000)
+
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The value that all bridges use for MaxAge when
+ this bridge is acting as the root. Note that
+ 802.1D-1990 specifies that the range for this
+ parameter is related to the value of
+ dot1dStpBridgeHelloTime. The granularity of this
+ timer is specified by 802.1D-1990 to be 1 second.
+ An agent may return a badValue error if a set is
+ attempted to a value which is not a whole number
+ of seconds."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.3.8"
+ ::= { dot1dStp 12 }
+
+dot1dStpBridgeHelloTime OBJECT-TYPE
+ SYNTAX Timeout (100..1000)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The value that all bridges use for HelloTime when
+ this bridge is acting as the root. The
+ granularity of this timer is specified by 802.1D-
+ 1990 to be 1 second. An agent may return a
+ badValue error if a set is attempted to a value
+ which is not a whole number of seconds."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.3.9"
+ ::= { dot1dStp 13 }
+
+dot1dStpBridgeForwardDelay OBJECT-TYPE
+ SYNTAX Timeout (400..3000)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The value that all bridges use for ForwardDelay
+ when this bridge is acting as the root. Note that
+ 802.1D-1990 specifies that the range for this
+ parameter is related to the value of
+ dot1dStpBridgeMaxAge. The granularity of this
+ timer is specified by 802.1D-1990 to be 1 second.
+ An agent may return a badValue error if a set is
+ attempted to a value which is not a whole number
+ of seconds."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.3.10"
+ ::= { dot1dStp 14 }
+
+-- The Spanning Tree Port Table
+
+dot1dStpPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Dot1dStpPortEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A table that contains port-specific information
+ for the Spanning Tree Protocol."
+ ::= { dot1dStp 15 }
+
+dot1dStpPortEntry OBJECT-TYPE
+ SYNTAX Dot1dStpPortEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A list of information maintained by every port
+ about the Spanning Tree Protocol state for that
+ port."
+ INDEX { dot1dStpPort }
+ ::= { dot1dStpPortTable 1 }
+
+Dot1dStpPortEntry ::=
+ SEQUENCE {
+ dot1dStpPort
+ INTEGER,
+ dot1dStpPortPriority
+ INTEGER,
+ dot1dStpPortState
+ INTEGER,
+ dot1dStpPortEnable
+ INTEGER,
+ dot1dStpPortPathCost
+ INTEGER,
+ dot1dStpPortDesignatedRoot
+ BridgeId,
+ dot1dStpPortDesignatedCost
+ INTEGER,
+ dot1dStpPortDesignatedBridge
+ BridgeId,
+ dot1dStpPortDesignatedPort
+ OCTET STRING,
+ dot1dStpPortForwardTransitions
+ Counter
+ }
+
+dot1dStpPort OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The port number of the port for which this entry
+ contains Spanning Tree Protocol management
+ information."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 6.8.2.1.2"
+ ::= { dot1dStpPortEntry 1 }
+
+dot1dStpPortPriority OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The value of the priority field which is
+ contained in the first (in network byte order)
+ octet of the (2 octet long) Port ID. The other
+ octet of the Port ID is given by the value of
+ dot1dStpPort."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.5.1"
+ ::= { dot1dStpPortEntry 2 }
+
+dot1dStpPortState OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(1),
+ blocking(2),
+ listening(3),
+ learning(4),
+ forwarding(5),
+ broken(6)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The port's current state as defined by
+ application of the Spanning Tree Protocol. This
+ state controls what action a port takes on
+ reception of a frame. If the bridge has detected
+ a port that is malfunctioning it will place that
+ port into the broken(6) state. For ports which
+ are disabled (see dot1dStpPortEnable), this object
+ will have a value of disabled(1)."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.5.2"
+ ::= { dot1dStpPortEntry 3 }
+
+dot1dStpPortEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The enabled/disabled status of the port."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.5.2"
+ ::= { dot1dStpPortEntry 4 }
+
+dot1dStpPortPathCost OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The contribution of this port to the path cost of
+ paths towards the spanning tree root which include
+ this port. 802.1D-1990 recommends that the
+ default value of this parameter be in inverse
+ proportion to the speed of the attached LAN."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.5.3"
+ ::= { dot1dStpPortEntry 5 }
+
+dot1dStpPortDesignatedRoot OBJECT-TYPE
+ SYNTAX BridgeId
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The unique Bridge Identifier of the Bridge
+ recorded as the Root in the Configuration BPDUs
+ transmitted by the Designated Bridge for the
+ segment to which the port is attached."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.5.4"
+ ::= { dot1dStpPortEntry 6 }
+
+dot1dStpPortDesignatedCost OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The path cost of the Designated Port of the
+ segment connected to this port. This value is
+ compared to the Root Path Cost field in received
+
+ bridge PDUs."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.5.5"
+ ::= { dot1dStpPortEntry 7 }
+
+dot1dStpPortDesignatedBridge OBJECT-TYPE
+ SYNTAX BridgeId
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Bridge Identifier of the bridge which this
+ port considers to be the Designated Bridge for
+ this port's segment."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.5.6"
+ ::= { dot1dStpPortEntry 8 }
+
+dot1dStpPortDesignatedPort OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (2))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Port Identifier of the port on the Designated
+ Bridge for this port's segment."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.5.7"
+ ::= { dot1dStpPortEntry 9 }
+
+dot1dStpPortForwardTransitions OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of times this port has transitioned
+ from the Learning state to the Forwarding state."
+ ::= { dot1dStpPortEntry 10 }
+
+-- the dot1dTp group
+
+-- Implementation of the dot1dTp group is optional. It is
+-- implemented by those bridges that support the transparent
+-- bridging mode. A transparent or SRT bridge will implement
+-- this group.
+
+dot1dTpLearnedEntryDiscards OBJECT-TYPE
+ SYNTAX Counter
+
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The total number of Forwarding Database entries,
+ which have been or would have been learnt, but
+ have been discarded due to a lack of space to
+ store them in the Forwarding Database. If this
+ counter is increasing, it indicates that the
+ Forwarding Database is regularly becoming full (a
+ condition which has unpleasant performance effects
+ on the subnetwork). If this counter has a
+ significant value but is not presently increasing,
+ it indicates that the problem has been occurring
+ but is not persistent."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 6.7.1.1.3"
+ ::= { dot1dTp 1 }
+
+dot1dTpAgingTime OBJECT-TYPE
+ SYNTAX INTEGER (10..1000000)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The timeout period in seconds for aging out
+ dynamically learned forwarding information.
+ 802.1D-1990 recommends a default of 300 seconds."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 6.7.1.1.3"
+ ::= { dot1dTp 2 }
+
+-- The Forwarding Database for Transparent Bridges
+
+dot1dTpFdbTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Dot1dTpFdbEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A table that contains information about unicast
+ entries for which the bridge has forwarding and/or
+ filtering information. This information is used
+ by the transparent bridging function in
+ determining how to propagate a received frame."
+ ::= { dot1dTp 3 }
+
+dot1dTpFdbEntry OBJECT-TYPE
+ SYNTAX Dot1dTpFdbEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Information about a specific unicast MAC address
+ for which the bridge has some forwarding and/or
+ filtering information."
+ INDEX { dot1dTpFdbAddress }
+ ::= { dot1dTpFdbTable 1 }
+
+Dot1dTpFdbEntry ::=
+ SEQUENCE {
+ dot1dTpFdbAddress
+ MacAddress,
+ dot1dTpFdbPort
+ INTEGER,
+ dot1dTpFdbStatus
+ INTEGER
+ }
+
+dot1dTpFdbAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A unicast MAC address for which the bridge has
+ forwarding and/or filtering information."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 3.9.1, 3.9.2"
+ ::= { dot1dTpFdbEntry 1 }
+
+dot1dTpFdbPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Either the value '0', or the port number of the
+ port on which a frame having a source address
+ equal to the value of the corresponding instance
+ of dot1dTpFdbAddress has been seen. A value of
+ '0' indicates that the port number has not been
+ learned but that the bridge does have some
+ forwarding/filtering information about this
+ address (e.g. in the dot1dStaticTable).
+ Implementors are encouraged to assign the port
+ value to this object whenever it is learned even
+ for addresses for which the corresponding value of
+ dot1dTpFdbStatus is not learned(3)."
+ ::= { dot1dTpFdbEntry 2 }
+
+dot1dTpFdbStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ invalid(2),
+ learned(3),
+ self(4),
+ mgmt(5)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The status of this entry. The meanings of the
+ values are:
+ other(1) : none of the following. This would
+ include the case where some other
+ MIB object (not the corresponding
+ instance of dot1dTpFdbPort, nor an
+ entry in the dot1dStaticTable) is
+ being used to determine if and how
+ frames addressed to the value of
+ the corresponding instance of
+ dot1dTpFdbAddress are being
+ forwarded.
+ invalid(2) : this entry is not longer valid
+ (e.g., it was learned but has since
+ aged-out), but has not yet been
+ flushed from the table.
+ learned(3) : the value of the corresponding
+ instance of dot1dTpFdbPort was
+ learned, and is being used.
+ self(4) : the value of the corresponding
+ instance of dot1dTpFdbAddress
+ represents one of the bridge's
+ addresses. The corresponding
+ instance of dot1dTpFdbPort
+ indicates which of the bridge's
+ ports has this address.
+ mgmt(5) : the value of the corresponding
+ instance of dot1dTpFdbAddress is
+ also the value of an existing
+ instance of dot1dStaticAddress."
+ ::= { dot1dTpFdbEntry 3 }
+
+-- Port Table for Transparent Bridges
+
+dot1dTpPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Dot1dTpPortEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A table that contains information about every
+ port that is associated with this transparent
+ bridge."
+ ::= { dot1dTp 4 }
+
+dot1dTpPortEntry OBJECT-TYPE
+ SYNTAX Dot1dTpPortEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A list of information for each port of a
+ transparent bridge."
+ INDEX { dot1dTpPort }
+ ::= { dot1dTpPortTable 1 }
+
+Dot1dTpPortEntry ::=
+ SEQUENCE {
+ dot1dTpPort
+ INTEGER,
+ dot1dTpPortMaxInfo
+ INTEGER,
+ dot1dTpPortInFrames
+ Counter,
+ dot1dTpPortOutFrames
+ Counter,
+ dot1dTpPortInDiscards
+ Counter
+ }
+
+dot1dTpPort OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The port number of the port for which this entry
+ contains Transparent bridging management
+ information."
+ ::= { dot1dTpPortEntry 1 }
+
+-- It would be nice if we could use ifMtu as the size of the
+-- largest INFO field, but we can't because ifMtu is defined
+-- to be the size that the (inter-)network layer can use which
+-- can differ from the MAC layer (especially if several layers
+-- of encapsulation are used).
+
+dot1dTpPortMaxInfo OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The maximum size of the INFO (non-MAC) field that
+ this port will receive or transmit."
+ ::= { dot1dTpPortEntry 2 }
+
+dot1dTpPortInFrames OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of frames that have been received by
+ this port from its segment. Note that a frame
+ received on the interface corresponding to this
+ port is only counted by this object if and only if
+ it is for a protocol being processed by the local
+ bridging function, including bridge management
+ frames."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 6.6.1.1.3"
+ ::= { dot1dTpPortEntry 3 }
+
+dot1dTpPortOutFrames OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of frames that have been transmitted
+ by this port to its segment. Note that a frame
+ transmitted on the interface corresponding to this
+ port is only counted by this object if and only if
+ it is for a protocol being processed by the local
+ bridging function, including bridge management
+ frames."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 6.6.1.1.3"
+ ::= { dot1dTpPortEntry 4 }
+
+dot1dTpPortInDiscards OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Count of valid frames received which were
+ discarded (i.e., filtered) by the Forwarding
+ Process."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 6.6.1.1.3"
+ ::= { dot1dTpPortEntry 5 }
+-- The Static (Destination-Address Filtering) Database
+
+-- Implementation of this group is optional.
+
+dot1dStaticTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Dot1dStaticEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A table containing filtering information
+ configured into the bridge by (local or network)
+ management specifying the set of ports to which
+ frames received from specific ports and containing
+ specific destination addresses are allowed to be
+ forwarded. The value of zero in this table as the
+ port number from which frames with a specific
+ destination address are received, is used to
+ specify all ports for which there is no specific
+ entry in this table for that particular
+ destination address. Entries are valid for
+ unicast and for group/broadcast addresses."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 6.7.2"
+ ::= { dot1dStatic 1 }
+
+dot1dStaticEntry OBJECT-TYPE
+ SYNTAX Dot1dStaticEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Filtering information configured into the bridge
+ by (local or network) management specifying the
+ set of ports to which frames received from a
+ specific port and containing a specific
+ destination address are allowed to be forwarded."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 6.7.2"
+ INDEX { dot1dStaticAddress, dot1dStaticReceivePort }
+ ::= { dot1dStaticTable 1 }
+
+Dot1dStaticEntry ::=
+ SEQUENCE {
+ dot1dStaticAddress
+ MacAddress,
+ dot1dStaticReceivePort
+ INTEGER,
+ dot1dStaticAllowedToGoTo
+ OCTET STRING,
+ dot1dStaticStatus
+ INTEGER
+ }
+
+dot1dStaticAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The destination MAC address in a frame to which
+ this entry's filtering information applies. This
+ object can take the value of a unicast address, a
+ group address or the broadcast address."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 3.9.1, 3.9.2"
+ ::= { dot1dStaticEntry 1 }
+
+dot1dStaticReceivePort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Either the value '0', or the port number of the
+ port from which a frame must be received in order
+ for this entry's filtering information to apply.
+ A value of zero indicates that this entry applies
+ on all ports of the bridge for which there is no
+ other applicable entry."
+ ::= { dot1dStaticEntry 2 }
+
+dot1dStaticAllowedToGoTo OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The set of ports to which frames received from a
+ specific port and destined for a specific MAC
+
+ address, are allowed to be forwarded. Each octet
+ within the value of this object specifies a set of
+ eight ports, with the first octet specifying ports
+ 1 through 8, the second octet specifying ports 9
+ through 16, etc. Within each octet, the most
+ significant bit represents the lowest numbered
+ port, and the least significant bit represents the
+ highest numbered port. Thus, each port of the
+ bridge is represented by a single bit within the
+ value of this object. If that bit has a value of
+ '1' then that port is included in the set of
+ ports; the port is not included if its bit has a
+ value of '0'. (Note that the setting of the bit
+ corresponding to the port from which a frame is
+ received is irrelevant.) The default value of
+ this object is a string of ones of appropriate
+ length."
+ ::= { dot1dStaticEntry 3 }
+
+dot1dStaticStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ invalid(2),
+ permanent(3),
+ deleteOnReset(4),
+ deleteOnTimeout(5)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This object indicates the status of this entry.
+ The default value is permanent(3).
+ other(1) - this entry is currently in use but
+ the conditions under which it will
+ remain so are different from each of the
+ following values.
+ invalid(2) - writing this value to the object
+ removes the corresponding entry.
+ permanent(3) - this entry is currently in use
+ and will remain so after the next reset
+ of the bridge.
+ deleteOnReset(4) - this entry is currently in
+ use and will remain so until the next
+ reset of the bridge.
+ deleteOnTimeout(5) - this entry is currently
+ in use and will remain so until it is
+ aged out."
+
+ ::= { dot1dStaticEntry 4 }
+
+-- Traps for use by Bridges
+
+-- Traps for the Spanning Tree Protocol
+
+newRoot TRAP-TYPE
+ ENTERPRISE dot1dBridge
+ DESCRIPTION
+ "The newRoot trap indicates that the sending agent
+ has become the new root of the Spanning Tree; the
+ trap is sent by a bridge soon after its election
+ as the new root, e.g., upon expiration of the
+ Topology Change Timer immediately subsequent to
+ its election. Implementation of this trap is
+ optional."
+ ::= 1
+
+topologyChange TRAP-TYPE
+ ENTERPRISE dot1dBridge
+ DESCRIPTION
+ "A topologyChange trap is sent by a bridge when
+ any of its configured ports transitions from the
+ Learning state to the Forwarding state, or from
+ the Forwarding state to the Blocking state. The
+ trap is not sent if a newRoot trap is sent for the
+ same transition. Implementation of this trap is
+ optional."
+ ::= 2
+
+END
--- /dev/null
+++ b/mibs/GNOME-SMI.txt
@@ -0,0 +1,88 @@
+GNOME-SMI DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY,
+ OBJECT-IDENTITY,
+ enterprises
+ FROM SNMPv2-SMI;
+
+gnome MODULE-IDENTITY
+ LAST-UPDATED "200709070000Z"
+ ORGANIZATION "GNOME project"
+ CONTACT-INFO
+ "GNU Network Object Model Environment project
+
+ see http://www.gnome.org for contact persons of a particular
+ area or subproject of GNOME.
+
+ Administrative contact for MIB module:
+
+ Jochen Friedrich
+ Ramsaystr. 9
+ 63450 Hanau
+ Germany
+
+ email: jochen@scram.de"
+ DESCRIPTION
+ "The Structure of GNOME."
+
+ -- revision history
+
+ REVISION "200709070000Z" -- Sep 07, 2007
+ DESCRIPTION
+ "Fixed wrong enterprise number (how comes this
+ typo was unnoticed for so long?)."
+
+ REVISION "200505070000Z" -- May 07, 2005
+ DESCRIPTION
+ "Added gnomeLDAP subtree for LDAP definitions."
+
+ REVISION "200312070000Z" -- December 07, 2003
+ DESCRIPTION
+ "Added gnomeSysadmin subtree for GNOME project system administration.
+ Updated contact info."
+
+ REVISION "9809010000Z" -- September 01, 1998
+ DESCRIPTION
+ "Initial version."
+
+ ::= { enterprises 3319 } -- assigned by IANA
+
+gnomeProducts OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "gnomeProducts is the root OBJECT IDENTIFIER from
+ which sysObjectID values are assigned."
+ ::= { gnome 1 }
+
+gnomeMgmt OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "gnomeMgmt defines the subtree for production GNOME related
+ MIB registrations."
+ ::= { gnome 2 }
+
+gnomeTest OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "gnomeTest defines the subtree for testing GNOME related
+ MIB registrations."
+ ::= { gnome 3 }
+
+gnomeSysadmin OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "gnomeSysadmin defines the subtree for GNOME related Sysadmin
+ MIB registrations."
+ ::= { gnome 4 }
+
+gnomeLDAP OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "gnomeLDAP defines the subtree for GNOME related LDAP
+ registrations."
+ ::= { gnome 5 }
+
+-- more to come if necessary.
+
+END
--- /dev/null
+++ b/mibs/OSPF-MIB.txt
@@ -0,0 +1,2723 @@
+OSPF-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32,
+ Integer32, IpAddress
+ FROM SNMPv2-SMI
+ TEXTUAL-CONVENTION, TruthValue, RowStatus
+ FROM SNMPv2-TC
+ MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
+ mib-2 FROM RFC1213-MIB;
+
+-- This MIB module uses the extended OBJECT-TYPE macro as
+-- defined in [9].
+
+ospf MODULE-IDENTITY
+ LAST-UPDATED "9501201225Z" -- Fri Jan 20 12:25:50 PST 1995
+ ORGANIZATION "IETF OSPF Working Group"
+ CONTACT-INFO
+ " Fred Baker
+ Postal: Cisco Systems
+ 519 Lado Drive
+ Santa Barbara, California 93111
+ Tel: +1 805 681 0115
+ E-Mail: fred@cisco.com
+
+ Rob Coltun
+ Postal: RainbowBridge Communications
+ Tel: (301) 340-9416
+ E-Mail: rcoltun@rainbow-bridge.com"
+ DESCRIPTION
+ "The MIB module to describe the OSPF Version 2
+ Protocol"
+ ::= { mib-2 14 }
+
+-- The Area ID, in OSPF, has the same format as an IP Address,
+-- but has the function of defining a summarization point for
+-- Link State Advertisements
+
+AreaID ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "An OSPF Area Identifier."
+ SYNTAX IpAddress
+
+
+-- The Router ID, in OSPF, has the same format as an IP Address,
+-- but identifies the router independent of its IP Address.
+
+RouterID ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "A OSPF Router Identifier."
+ SYNTAX IpAddress
+
+
+-- The OSPF Metric is defined as an unsigned value in the range
+
+Metric ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The OSPF Internal Metric."
+ SYNTAX Integer32 (0..'FFFF'h)
+
+BigMetric ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The OSPF External Metric."
+ SYNTAX Integer32 (0..'FFFFFF'h)
+
+-- Status Values
+
+Status ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The status of an interface: 'enabled' indicates that
+ it is willing to communicate with other OSPF Routers,
+ while 'disabled' indicates that it is not."
+ SYNTAX INTEGER { enabled (1), disabled (2) }
+
+-- Time Durations measured in seconds
+
+PositiveInteger ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "A positive integer. Values in excess are precluded as
+ unnecessary and prone to interoperability issues."
+ SYNTAX Integer32 (0..'7FFFFFFF'h)
+
+HelloRange ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The range of intervals on which hello messages are
+ exchanged."
+ SYNTAX Integer32 (1..'FFFF'h)
+
+UpToMaxAge ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The values that one might find or configure for
+ variables bounded by the maximum age of an LSA."
+ SYNTAX Integer32 (0..3600)
+
+
+-- The range of ifIndex
+
+InterfaceIndex ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The range of ifIndex."
+ SYNTAX Integer32
+
+
+-- Potential Priorities for the Designated Router Election
+
+DesignatedRouterPriority ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The values defined for the priority of a system for
+ becoming the designated router."
+ SYNTAX Integer32 (0..'FF'h)
+
+TOSType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Type of Service is defined as a mapping to the IP Type of
+ Service Flags as defined in the IP Forwarding Table MIB
+
+ +-----+-----+-----+-----+-----+-----+-----+-----+
+ | | | |
+ | PRECEDENCE | TYPE OF SERVICE | 0 |
+ | | | |
+ +-----+-----+-----+-----+-----+-----+-----+-----+
+
+ IP TOS IP TOS
+ Field Policy Field Policy
+
+ Contents Code Contents Code
+ 0 0 0 0 ==> 0 0 0 0 1 ==> 2
+ 0 0 1 0 ==> 4 0 0 1 1 ==> 6
+ 0 1 0 0 ==> 8 0 1 0 1 ==> 10
+ 0 1 1 0 ==> 12 0 1 1 1 ==> 14
+ 1 0 0 0 ==> 16 1 0 0 1 ==> 18
+ 1 0 1 0 ==> 20 1 0 1 1 ==> 22
+ 1 1 0 0 ==> 24 1 1 0 1 ==> 26
+ 1 1 1 0 ==> 28 1 1 1 1 ==> 30
+
+ The remaining values are left for future definition."
+ SYNTAX Integer32 (0..30)
+
+
+-- OSPF General Variables
+
+-- These parameters apply globally to the Router's
+-- OSPF Process.
+
+ospfGeneralGroup OBJECT IDENTIFIER ::= { ospf 1 }
+
+
+ ospfRouterId OBJECT-TYPE
+ SYNTAX RouterID
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "A 32-bit integer uniquely identifying the
+ router in the Autonomous System.
+
+ By convention, to ensure uniqueness, this
+ should default to the value of one of the
+ router's IP interface addresses."
+ REFERENCE
+ "OSPF Version 2, C.1 Global parameters"
+ ::= { ospfGeneralGroup 1 }
+
+
+ ospfAdminStat OBJECT-TYPE
+ SYNTAX Status
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The administrative status of OSPF in the
+ router. The value 'enabled' denotes that the
+ OSPF Process is active on at least one inter-
+ face; 'disabled' disables it on all inter-
+ faces."
+ ::= { ospfGeneralGroup 2 }
+
+ ospfVersionNumber OBJECT-TYPE
+ SYNTAX INTEGER { version2 (2) }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current version number of the OSPF proto-
+ col is 2."
+ REFERENCE
+ "OSPF Version 2, Title"
+ ::= { ospfGeneralGroup 3 }
+
+
+ ospfAreaBdrRtrStatus OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A flag to note whether this router is an area
+ border router."
+ REFERENCE
+ "OSPF Version 2, Section 3 Splitting the AS into
+ Areas"
+ ::= { ospfGeneralGroup 4 }
+
+
+ ospfASBdrRtrStatus OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "A flag to note whether this router is config-
+ ured as an Autonomous System border router."
+ REFERENCE
+ "OSPF Version 2, Section 3.3 Classification of
+ routers"
+ ::= { ospfGeneralGroup 5 }
+
+ ospfExternLsaCount OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of external (LS type 5) link-state
+ advertisements in the link-state database."
+ REFERENCE
+ "OSPF Version 2, Appendix A.4.5 AS external link
+ advertisements"
+ ::= { ospfGeneralGroup 6 }
+
+
+ ospfExternLsaCksumSum OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The 32-bit unsigned sum of the LS checksums of
+ the external link-state advertisements con-
+ tained in the link-state database. This sum
+ can be used to determine if there has been a
+ change in a router's link state database, and
+ to compare the link-state database of two
+ routers."
+ ::= { ospfGeneralGroup 7 }
+
+
+ ospfTOSSupport OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The router's support for type-of-service rout-
+ ing."
+ REFERENCE
+ "OSPF Version 2, Appendix F.1.2 Optional TOS
+ support"
+ ::= { ospfGeneralGroup 8 }
+
+ ospfOriginateNewLsas OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of new link-state advertisements
+ that have been originated. This number is in-
+ cremented each time the router originates a new
+ LSA."
+ ::= { ospfGeneralGroup 9 }
+
+
+ ospfRxNewLsas OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of link-state advertisements re-
+ ceived determined to be new instantiations.
+ This number does not include newer instantia-
+ tions of self-originated link-state advertise-
+ ments."
+ ::= { ospfGeneralGroup 10 }
+
+ ospfExtLsdbLimit OBJECT-TYPE
+ SYNTAX Integer32 (-1..'7FFFFFFF'h)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The maximum number of non-default AS-
+ external-LSAs entries that can be stored in the
+ link-state database. If the value is -1, then
+ there is no limit.
+
+ When the number of non-default AS-external-LSAs
+ in a router's link-state database reaches
+ ospfExtLsdbLimit, the router enters Overflow-
+ State. The router never holds more than
+ ospfExtLsdbLimit non-default AS-external-LSAs
+ in its database. OspfExtLsdbLimit MUST be set
+ identically in all routers attached to the OSPF
+ backbone and/or any regular OSPF area. (i.e.,
+ OSPF stub areas and NSSAs are excluded)."
+ DEFVAL { -1 }
+ ::= { ospfGeneralGroup 11 }
+
+ ospfMulticastExtensions OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "A Bit Mask indicating whether the router is
+ forwarding IP multicast (Class D) datagrams
+ based on the algorithms defined in the Multi-
+ cast Extensions to OSPF.
+
+ Bit 0, if set, indicates that the router can
+ forward IP multicast datagrams in the router's
+ directly attached areas (called intra-area mul-
+ ticast routing).
+
+ Bit 1, if set, indicates that the router can
+ forward IP multicast datagrams between OSPF
+ areas (called inter-area multicast routing).
+
+ Bit 2, if set, indicates that the router can
+ forward IP multicast datagrams between Auto-
+ nomous Systems (called inter-AS multicast rout-
+ ing).
+
+ Only certain combinations of bit settings are
+ allowed, namely: 0 (no multicast forwarding is
+ enabled), 1 (intra-area multicasting only), 3
+ (intra-area and inter-area multicasting), 5
+ (intra-area and inter-AS multicasting) and 7
+ (multicasting everywhere). By default, no mul-
+ ticast forwarding is enabled."
+ DEFVAL { 0 }
+ ::= { ospfGeneralGroup 12 }
+
+ ospfExitOverflowInterval OBJECT-TYPE
+ SYNTAX PositiveInteger
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The number of seconds that, after entering
+ OverflowState, a router will attempt to leave
+ OverflowState. This allows the router to again
+ originate non-default AS-external-LSAs. When
+ set to 0, the router will not leave Overflow-
+ State until restarted."
+ DEFVAL { 0 }
+ ::= { ospfGeneralGroup 13 }
+
+
+ ospfDemandExtensions OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The router's support for demand routing."
+ REFERENCE
+ "OSPF Version 2, Appendix on Demand Routing"
+ ::= { ospfGeneralGroup 14 }
+
+
+-- The OSPF Area Data Structure contains information
+-- regarding the various areas. The interfaces and
+-- virtual links are configured as part of these areas.
+-- Area 0.0.0.0, by definition, is the Backbone Area
+
+
+ ospfAreaTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OspfAreaEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information describing the configured parame-
+ ters and cumulative statistics of the router's
+ attached areas."
+ REFERENCE
+ "OSPF Version 2, Section 6 The Area Data Struc-
+ ture"
+ ::= { ospf 2 }
+
+
+ ospfAreaEntry OBJECT-TYPE
+ SYNTAX OspfAreaEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information describing the configured parame-
+ ters and cumulative statistics of one of the
+ router's attached areas."
+ INDEX { ospfAreaId }
+ ::= { ospfAreaTable 1 }
+
+OspfAreaEntry ::=
+ SEQUENCE {
+ ospfAreaId
+ AreaID,
+ ospfAuthType
+ Integer32,
+ ospfImportAsExtern
+ INTEGER,
+ ospfSpfRuns
+ Counter32,
+ ospfAreaBdrRtrCount
+ Gauge32,
+ ospfAsBdrRtrCount
+ Gauge32,
+ ospfAreaLsaCount
+ Gauge32,
+ ospfAreaLsaCksumSum
+ Integer32,
+ ospfAreaSummary
+ INTEGER,
+ ospfAreaStatus
+ RowStatus
+ }
+
+ ospfAreaId OBJECT-TYPE
+ SYNTAX AreaID
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A 32-bit integer uniquely identifying an area.
+ Area ID 0.0.0.0 is used for the OSPF backbone."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ ::= { ospfAreaEntry 1 }
+
+
+ ospfAuthType OBJECT-TYPE
+ SYNTAX Integer32
+ -- none (0),
+ -- simplePassword (1)
+ -- md5 (2)
+ -- reserved for specification by IANA (> 2)
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "The authentication type specified for an area.
+ Additional authentication types may be assigned
+ locally on a per Area basis."
+ REFERENCE
+ "OSPF Version 2, Appendix E Authentication"
+ DEFVAL { 0 } -- no authentication, by default
+ ::= { ospfAreaEntry 2 }
+
+ ospfImportAsExtern OBJECT-TYPE
+ SYNTAX INTEGER {
+ importExternal (1),
+ importNoExternal (2),
+ importNssa (3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The area's support for importing AS external
+ link- state advertisements."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ DEFVAL { importExternal }
+ ::= { ospfAreaEntry 3 }
+
+
+ ospfSpfRuns OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times that the intra-area route
+ table has been calculated using this area's
+ link-state database. This is typically done
+ using Dijkstra's algorithm."
+ ::= { ospfAreaEntry 4 }
+
+
+ ospfAreaBdrRtrCount OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of area border routers reach-
+ able within this area. This is initially zero,
+ and is calculated in each SPF Pass."
+ ::= { ospfAreaEntry 5 }
+
+ ospfAsBdrRtrCount OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of Autonomous System border
+ routers reachable within this area. This is
+ initially zero, and is calculated in each SPF
+ Pass."
+ ::= { ospfAreaEntry 6 }
+
+
+ ospfAreaLsaCount OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of link-state advertisements
+ in this area's link-state database, excluding
+ AS External LSA's."
+ ::= { ospfAreaEntry 7 }
+
+
+ ospfAreaLsaCksumSum OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The 32-bit unsigned sum of the link-state ad-
+ vertisements' LS checksums contained in this
+ area's link-state database. This sum excludes
+ external (LS type 5) link-state advertisements.
+ The sum can be used to determine if there has
+ been a change in a router's link state data-
+ base, and to compare the link-state database of
+ two routers."
+ DEFVAL { 0 }
+ ::= { ospfAreaEntry 8 }
+
+ ospfAreaSummary OBJECT-TYPE
+ SYNTAX INTEGER {
+ noAreaSummary (1),
+ sendAreaSummary (2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The variable ospfAreaSummary controls the im-
+ port of summary LSAs into stub areas. It has
+ no effect on other areas.
+
+ If it is noAreaSummary, the router will neither
+ originate nor propagate summary LSAs into the
+ stub area. It will rely entirely on its de-
+ fault route.
+
+ If it is sendAreaSummary, the router will both
+ summarize and propagate summary LSAs."
+ DEFVAL { noAreaSummary }
+ ::= { ospfAreaEntry 9 }
+
+
+ ospfAreaStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This variable displays the status of the en-
+ try. Setting it to 'invalid' has the effect of
+ rendering it inoperative. The internal effect
+ (row removal) is implementation dependent."
+ ::= { ospfAreaEntry 10 }
+
+
+-- OSPF Area Default Metric Table
+
+-- The OSPF Area Default Metric Table describes the metrics
+-- that a default Area Border Router will advertise into a
+-- Stub area.
+
+
+ ospfStubAreaTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OspfStubAreaEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The set of metrics that will be advertised by
+ a default Area Border Router into a stub area."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2, Area Parameters"
+ ::= { ospf 3 }
+
+
+ ospfStubAreaEntry OBJECT-TYPE
+ SYNTAX OspfStubAreaEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The metric for a given Type of Service that
+ will be advertised by a default Area Border
+ Router into a stub area."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2, Area Parameters"
+ INDEX { ospfStubAreaId, ospfStubTOS }
+ ::= { ospfStubAreaTable 1 }
+
+OspfStubAreaEntry ::=
+ SEQUENCE {
+ ospfStubAreaId
+ AreaID,
+ ospfStubTOS
+ TOSType,
+ ospfStubMetric
+ BigMetric,
+ ospfStubStatus
+ RowStatus,
+ ospfStubMetricType
+ INTEGER
+ }
+
+ ospfStubAreaId OBJECT-TYPE
+ SYNTAX AreaID
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The 32 bit identifier for the Stub Area. On
+ creation, this can be derived from the in-
+ stance."
+ ::= { ospfStubAreaEntry 1 }
+
+
+ ospfStubTOS OBJECT-TYPE
+ SYNTAX TOSType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Type of Service associated with the
+ metric. On creation, this can be derived from
+ the instance."
+ ::= { ospfStubAreaEntry 2 }
+
+
+ ospfStubMetric OBJECT-TYPE
+ SYNTAX BigMetric
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The metric value applied at the indicated type
+ of service. By default, this equals the least
+ metric at the type of service among the inter-
+ faces to other areas."
+ ::= { ospfStubAreaEntry 3 }
+
+
+ ospfStubStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This variable displays the status of the en-
+ try. Setting it to 'invalid' has the effect of
+ rendering it inoperative. The internal effect
+ (row removal) is implementation dependent."
+ ::= { ospfStubAreaEntry 4 }
+
+ ospfStubMetricType OBJECT-TYPE
+ SYNTAX INTEGER {
+ ospfMetric (1), -- OSPF Metric
+ comparableCost (2), -- external type 1
+ nonComparable (3) -- external type 2
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This variable displays the type of metric ad-
+ vertised as a default route."
+ DEFVAL { ospfMetric }
+ ::= { ospfStubAreaEntry 5 }
+
+-- OSPF Link State Database
+
+-- The Link State Database contains the Link State
+-- Advertisements from throughout the areas that the
+-- device is attached to.
+
+
+ ospfLsdbTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OspfLsdbEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The OSPF Process's Link State Database."
+ REFERENCE
+ "OSPF Version 2, Section 12 Link State Adver-
+ tisements"
+ ::= { ospf 4 }
+
+
+ ospfLsdbEntry OBJECT-TYPE
+ SYNTAX OspfLsdbEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A single Link State Advertisement."
+ INDEX { ospfLsdbAreaId, ospfLsdbType,
+ ospfLsdbLsid, ospfLsdbRouterId }
+ ::= { ospfLsdbTable 1 }
+
+OspfLsdbEntry ::=
+ SEQUENCE {
+ ospfLsdbAreaId
+ AreaID,
+ ospfLsdbType
+ INTEGER,
+ ospfLsdbLsid
+ IpAddress,
+ ospfLsdbRouterId
+ RouterID,
+ ospfLsdbSequence
+ Integer32,
+ ospfLsdbAge
+ Integer32,
+ ospfLsdbChecksum
+ Integer32,
+ ospfLsdbAdvertisement
+ OCTET STRING
+ }
+ ospfLsdbAreaId OBJECT-TYPE
+ SYNTAX AreaID
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The 32 bit identifier of the Area from which
+ the LSA was received."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ ::= { ospfLsdbEntry 1 }
+
+-- External Link State Advertisements are permitted
+-- for backward compatibility, but should be displayed in
+-- the ospfExtLsdbTable rather than here.
+
+ ospfLsdbType OBJECT-TYPE
+ SYNTAX INTEGER {
+ routerLink (1),
+ networkLink (2),
+ summaryLink (3),
+ asSummaryLink (4),
+ asExternalLink (5), -- but see ospfExtLsdbTable
+ multicastLink (6),
+ nssaExternalLink (7)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of the link state advertisement.
+ Each link state type has a separate advertise-
+ ment format."
+ REFERENCE
+ "OSPF Version 2, Appendix A.4.1 The Link State
+ Advertisement header"
+ ::= { ospfLsdbEntry 2 }
+
+ ospfLsdbLsid OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Link State ID is an LS Type Specific field
+ containing either a Router ID or an IP Address;
+ it identifies the piece of the routing domain
+ that is being described by the advertisement."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.4 Link State ID"
+ ::= { ospfLsdbEntry 3 }
+ ospfLsdbRouterId OBJECT-TYPE
+ SYNTAX RouterID
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The 32 bit number that uniquely identifies the
+ originating router in the Autonomous System."
+ REFERENCE
+ "OSPF Version 2, Appendix C.1 Global parameters"
+ ::= { ospfLsdbEntry 4 }
+
+-- Note that the OSPF Sequence Number is a 32 bit signed
+-- integer. It starts with the value '80000001'h,
+-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
+-- Thus, a typical sequence number will be very negative.
+
+ ospfLsdbSequence OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The sequence number field is a signed 32-bit
+ integer. It is used to detect old and dupli-
+ cate link state advertisements. The space of
+ sequence numbers is linearly ordered. The
+ larger the sequence number the more recent the
+ advertisement."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.6 LS sequence
+ number"
+ ::= { ospfLsdbEntry 5 }
+
+
+ ospfLsdbAge OBJECT-TYPE
+ SYNTAX Integer32 -- Should be 0..MaxAge
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This field is the age of the link state adver-
+ tisement in seconds."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.1 LS age"
+ ::= { ospfLsdbEntry 6 }
+
+ ospfLsdbChecksum OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This field is the checksum of the complete
+ contents of the advertisement, excepting the
+ age field. The age field is excepted so that
+ an advertisement's age can be incremented
+ without updating the checksum. The checksum
+ used is the same that is used for ISO connec-
+ tionless datagrams; it is commonly referred to
+ as the Fletcher checksum."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.7 LS checksum"
+ ::= { ospfLsdbEntry 7 }
+
+
+ ospfLsdbAdvertisement OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..65535))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The entire Link State Advertisement, including
+ its header."
+ REFERENCE
+ "OSPF Version 2, Section 12 Link State Adver-
+ tisements"
+ ::= { ospfLsdbEntry 8 }
+
+
+-- Address Range Table
+
+-- The Address Range Table acts as an adjunct to the Area
+-- Table; It describes those Address Range Summaries that
+-- are configured to be propagated from an Area to reduce
+-- the amount of information about it which is known beyond
+-- its borders.
+
+ ospfAreaRangeTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OspfAreaRangeEntry
+ MAX-ACCESS not-accessible
+ STATUS obsolete
+ DESCRIPTION
+ "A range if IP addresses specified by an IP
+ address/IP network mask pair. For example,
+ class B address range of X.X.X.X with a network
+ mask of 255.255.0.0 includes all IP addresses
+ from X.X.0.0 to X.X.255.255"
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ ::= { ospf 5 }
+ ospfAreaRangeEntry OBJECT-TYPE
+ SYNTAX OspfAreaRangeEntry
+ MAX-ACCESS not-accessible
+ STATUS obsolete
+ DESCRIPTION
+ "A range if IP addresses specified by an IP
+ address/IP network mask pair. For example,
+ class B address range of X.X.X.X with a network
+ mask of 255.255.0.0 includes all IP addresses
+ from X.X.0.0 to X.X.255.255"
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ INDEX { ospfAreaRangeAreaId, ospfAreaRangeNet }
+ ::= { ospfAreaRangeTable 1 }
+
+OspfAreaRangeEntry ::=
+ SEQUENCE {
+ ospfAreaRangeAreaId
+ AreaID,
+ ospfAreaRangeNet
+ IpAddress,
+ ospfAreaRangeMask
+ IpAddress,
+ ospfAreaRangeStatus
+ RowStatus,
+ ospfAreaRangeEffect
+ INTEGER
+ }
+
+ ospfAreaRangeAreaId OBJECT-TYPE
+ SYNTAX AreaID
+ MAX-ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+ "The Area the Address Range is to be found
+ within."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ ::= { ospfAreaRangeEntry 1 }
+
+
+ ospfAreaRangeNet OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+ "The IP Address of the Net or Subnet indicated
+ by the range."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ ::= { ospfAreaRangeEntry 2 }
+
+
+ ospfAreaRangeMask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "The Subnet Mask that pertains to the Net or
+ Subnet."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ ::= { ospfAreaRangeEntry 3 }
+
+ ospfAreaRangeStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "This variable displays the status of the en-
+ try. Setting it to 'invalid' has the effect of
+ rendering it inoperative. The internal effect
+ (row removal) is implementation dependent."
+ ::= { ospfAreaRangeEntry 4 }
+
+
+ ospfAreaRangeEffect OBJECT-TYPE
+ SYNTAX INTEGER {
+ advertiseMatching (1),
+ doNotAdvertiseMatching (2)
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "Subnets subsumed by ranges either trigger the
+ advertisement of the indicated summary (adver-
+ tiseMatching), or result in the subnet's not
+ being advertised at all outside the area."
+ DEFVAL { advertiseMatching }
+ ::= { ospfAreaRangeEntry 5 }
+
+
+
+-- OSPF Host Table
+
+-- The Host/Metric Table indicates what hosts are directly
+-- attached to the Router, and what metrics and types of
+-- service should be advertised for them.
+
+ ospfHostTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OspfHostEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The list of Hosts, and their metrics, that the
+ router will advertise as host routes."
+ REFERENCE
+ "OSPF Version 2, Appendix C.6 Host route param-
+ eters"
+ ::= { ospf 6 }
+
+
+ ospfHostEntry OBJECT-TYPE
+ SYNTAX OspfHostEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A metric to be advertised, for a given type of
+ service, when a given host is reachable."
+ INDEX { ospfHostIpAddress, ospfHostTOS }
+ ::= { ospfHostTable 1 }
+
+OspfHostEntry ::=
+ SEQUENCE {
+ ospfHostIpAddress
+ IpAddress,
+ ospfHostTOS
+ TOSType,
+ ospfHostMetric
+ Metric,
+ ospfHostStatus
+ RowStatus,
+ ospfHostAreaID
+ AreaID
+ }
+
+ ospfHostIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP Address of the Host."
+ REFERENCE
+ "OSPF Version 2, Appendix C.6 Host route parame-
+ ters"
+ ::= { ospfHostEntry 1 }
+
+
+ ospfHostTOS OBJECT-TYPE
+ SYNTAX TOSType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Type of Service of the route being config-
+ ured."
+ REFERENCE
+ "OSPF Version 2, Appendix C.6 Host route parame-
+ ters"
+ ::= { ospfHostEntry 2 }
+
+
+ ospfHostMetric OBJECT-TYPE
+ SYNTAX Metric
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The Metric to be advertised."
+ REFERENCE
+ "OSPF Version 2, Appendix C.6 Host route parame-
+ ters"
+ ::= { ospfHostEntry 3 }
+
+ ospfHostStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This variable displays the status of the en-
+ try. Setting it to 'invalid' has the effect of
+ rendering it inoperative. The internal effect
+ (row removal) is implementation dependent."
+ ::= { ospfHostEntry 4 }
+
+
+ ospfHostAreaID OBJECT-TYPE
+ SYNTAX AreaID
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Area the Host Entry is to be found within.
+ By default, the area that a subsuming OSPF in-
+ terface is in, or 0.0.0.0"
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ ::= { ospfHostEntry 5 }
+
+
+-- OSPF Interface Table
+
+-- The OSPF Interface Table augments the ipAddrTable
+-- with OSPF specific information.
+
+ ospfIfTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OspfIfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The OSPF Interface Table describes the inter-
+ faces from the viewpoint of OSPF."
+ REFERENCE
+ "OSPF Version 2, Appendix C.3 Router interface
+ parameters"
+ ::= { ospf 7 }
+
+
+ ospfIfEntry OBJECT-TYPE
+ SYNTAX OspfIfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The OSPF Interface Entry describes one inter-
+ face from the viewpoint of OSPF."
+ INDEX { ospfIfIpAddress, ospfAddressLessIf }
+ ::= { ospfIfTable 1 }
+
+OspfIfEntry ::=
+ SEQUENCE {
+ ospfIfIpAddress
+ IpAddress,
+ ospfAddressLessIf
+ Integer32,
+ ospfIfAreaId
+ AreaID,
+ ospfIfType
+ INTEGER,
+ ospfIfAdminStat
+ Status,
+ ospfIfRtrPriority
+ DesignatedRouterPriority,
+ ospfIfTransitDelay
+ UpToMaxAge,
+ ospfIfRetransInterval
+ UpToMaxAge,
+ ospfIfHelloInterval
+ HelloRange,
+ ospfIfRtrDeadInterval
+ PositiveInteger,
+ ospfIfPollInterval
+ PositiveInteger,
+ ospfIfState
+ INTEGER,
+ ospfIfDesignatedRouter
+ IpAddress,
+ ospfIfBackupDesignatedRouter
+ IpAddress,
+ ospfIfEvents
+ Counter32,
+ ospfIfAuthType
+ INTEGER,
+ ospfIfAuthKey
+ OCTET STRING,
+ ospfIfStatus
+ RowStatus,
+ ospfIfMulticastForwarding
+ INTEGER,
+ ospfIfDemand
+ TruthValue
+ }
+
+ ospfIfIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP address of this OSPF interface."
+ ::= { ospfIfEntry 1 }
+
+ ospfAddressLessIf OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "For the purpose of easing the instancing of
+ addressed and addressless interfaces; This
+ variable takes the value 0 on interfaces with
+ IP Addresses, and the corresponding value of
+ ifIndex for interfaces having no IP Address."
+ ::= { ospfIfEntry 2 }
+ ospfIfAreaId OBJECT-TYPE
+ SYNTAX AreaID
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A 32-bit integer uniquely identifying the area
+ to which the interface connects. Area ID
+ 0.0.0.0 is used for the OSPF backbone."
+ DEFVAL { '00000000'H } -- 0.0.0.0
+ ::= { ospfIfEntry 3 }
+
+ ospfIfType OBJECT-TYPE
+ SYNTAX INTEGER {
+ broadcast (1),
+ nbma (2),
+ pointToPoint (3),
+ pointToMultipoint (5)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The OSPF interface type.
+
+ By way of a default, this field may be intuited
+ from the corresponding value of ifType. Broad-
+ cast LANs, such as Ethernet and IEEE 802.5,
+ take the value 'broadcast', X.25 and similar
+ technologies take the value 'nbma', and links
+ that are definitively point to point take the
+ value 'pointToPoint'."
+ ::= { ospfIfEntry 4 }
+
+
+ ospfIfAdminStat OBJECT-TYPE
+ SYNTAX Status
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The OSPF interface's administrative status.
+ The value formed on the interface, and the in-
+ terface will be advertised as an internal route
+ to some area. The value 'disabled' denotes
+ that the interface is external to OSPF."
+ DEFVAL { enabled }
+ ::= { ospfIfEntry 5 }
+
+ ospfIfRtrPriority OBJECT-TYPE
+ SYNTAX DesignatedRouterPriority
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The priority of this interface. Used in
+ multi-access networks, this field is used in
+ the designated router election algorithm. The
+ value 0 signifies that the router is not eligi-
+ ble to become the designated router on this
+ particular network. In the event of a tie in
+ this value, routers will use their Router ID as
+ a tie breaker."
+ DEFVAL { 1 }
+ ::= { ospfIfEntry 6 }
+
+
+ ospfIfTransitDelay OBJECT-TYPE
+ SYNTAX UpToMaxAge
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The estimated number of seconds it takes to
+ transmit a link state update packet over this
+ interface."
+ DEFVAL { 1 }
+ ::= { ospfIfEntry 7 }
+
+
+ ospfIfRetransInterval OBJECT-TYPE
+ SYNTAX UpToMaxAge
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The number of seconds between link-state ad-
+ vertisement retransmissions, for adjacencies
+ belonging to this interface. This value is
+ also used when retransmitting database descrip-
+ tion and link-state request packets."
+ DEFVAL { 5 }
+ ::= { ospfIfEntry 8 }
+
+
+ ospfIfHelloInterval OBJECT-TYPE
+ SYNTAX HelloRange
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The length of time, in seconds, between the
+ Hello packets that the router sends on the in-
+ terface. This value must be the same for all
+ routers attached to a common network."
+ DEFVAL { 10 }
+ ::= { ospfIfEntry 9 }
+
+
+ ospfIfRtrDeadInterval OBJECT-TYPE
+ SYNTAX PositiveInteger
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The number of seconds that a router's Hello
+ packets have not been seen before it's neigh-
+ bors declare the router down. This should be
+ some multiple of the Hello interval. This
+ value must be the same for all routers attached
+ to a common network."
+ DEFVAL { 40 }
+ ::= { ospfIfEntry 10 }
+
+
+ ospfIfPollInterval OBJECT-TYPE
+ SYNTAX PositiveInteger
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The larger time interval, in seconds, between
+ the Hello packets sent to an inactive non-
+ broadcast multi- access neighbor."
+ DEFVAL { 120 }
+ ::= { ospfIfEntry 11 }
+
+
+ ospfIfState OBJECT-TYPE
+ SYNTAX INTEGER {
+ down (1),
+ loopback (2),
+ waiting (3),
+ pointToPoint (4),
+ designatedRouter (5),
+ backupDesignatedRouter (6),
+ otherDesignatedRouter (7)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The OSPF Interface State."
+ DEFVAL { down }
+ ::= { ospfIfEntry 12 }
+
+
+ ospfIfDesignatedRouter OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP Address of the Designated Router."
+ DEFVAL { '00000000'H } -- 0.0.0.0
+ ::= { ospfIfEntry 13 }
+
+
+ ospfIfBackupDesignatedRouter OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP Address of the Backup Designated
+ Router."
+ DEFVAL { '00000000'H } -- 0.0.0.0
+ ::= { ospfIfEntry 14 }
+
+ ospfIfEvents OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times this OSPF interface has
+ changed its state, or an error has occurred."
+ ::= { ospfIfEntry 15 }
+
+
+ ospfIfAuthKey OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..256))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The Authentication Key. If the Area's Author-
+ ization Type is simplePassword, and the key
+ length is shorter than 8 octets, the agent will
+ left adjust and zero fill to 8 octets.
+
+ Note that unauthenticated interfaces need no
+ authentication key, and simple password authen-
+ tication cannot use a key of more than 8 oc-
+ tets. Larger keys are useful only with authen-
+ tication mechanisms not specified in this docu-
+ ment.
+
+ When read, ospfIfAuthKey always returns an Oc-
+ tet String of length zero."
+ REFERENCE
+ "OSPF Version 2, Section 9 The Interface Data
+ Structure"
+ DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0
+ ::= { ospfIfEntry 16 }
+
+ ospfIfStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This variable displays the status of the en-
+ try. Setting it to 'invalid' has the effect of
+ rendering it inoperative. The internal effect
+ (row removal) is implementation dependent."
+ ::= { ospfIfEntry 17 }
+
+
+ ospfIfMulticastForwarding OBJECT-TYPE
+ SYNTAX INTEGER {
+ blocked (1), -- no multicast forwarding
+ multicast (2), -- using multicast address
+ unicast (3) -- to each OSPF neighbor
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The way multicasts should forwarded on this
+ interface; not forwarded, forwarded as data
+ link multicasts, or forwarded as data link uni-
+ casts. Data link multicasting is not meaning-
+ ful on point to point and NBMA interfaces, and
+ setting ospfMulticastForwarding to 0 effective-
+ ly disables all multicast forwarding."
+ DEFVAL { blocked }
+ ::= { ospfIfEntry 18 }
+
+
+ ospfIfDemand OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates whether Demand OSPF procedures (hel-
+ lo supression to FULL neighbors and setting the
+ DoNotAge flag on proogated LSAs) should be per-
+ formed on this interface."
+ DEFVAL { false }
+ ::= { ospfIfEntry 19 }
+
+
+ ospfIfAuthType OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ -- none (0),
+ -- simplePassword (1)
+ -- md5 (2)
+ -- reserved for specification by IANA (> 2)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The authentication type specified for an in-
+ terface. Additional authentication types may
+ be assigned locally."
+ REFERENCE
+ "OSPF Version 2, Appendix E Authentication"
+ DEFVAL { 0 } -- no authentication, by default
+ ::= { ospfIfEntry 20 }
+
+
+-- OSPF Interface Metric Table
+
+-- The Metric Table describes the metrics to be advertised
+-- for a specified interface at the various types of service.
+-- As such, this table is an adjunct of the OSPF Interface
+-- Table.
+
+-- Types of service, as defined by RFC 791, have the ability
+-- to request low delay, high bandwidth, or reliable linkage.
+
+-- For the purposes of this specification, the measure of
+-- bandwidth
+
+-- Metric = 10^8 / ifSpeed
+
+-- is the default value. For multiple link interfaces, note
+-- that ifSpeed is the sum of the individual link speeds.
+-- This yields a number having the following typical values:
+
+-- Network Type/bit rate Metric
+
+-- >= 100 MBPS 1
+-- Ethernet/802.3 10
+-- E1 48
+-- T1 (ESF) 65
+-- 64 KBPS 1562
+-- 56 KBPS 1785
+-- 19.2 KBPS 5208
+-- 9.6 KBPS 10416
+
+-- Routes that are not specified use the default (TOS 0) metric
+
+ ospfIfMetricTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OspfIfMetricEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The TOS metrics for a non-virtual interface
+ identified by the interface index."
+ REFERENCE
+ "OSPF Version 2, Appendix C.3 Router interface
+ parameters"
+ ::= { ospf 8 }
+
+ ospfIfMetricEntry OBJECT-TYPE
+ SYNTAX OspfIfMetricEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A particular TOS metric for a non-virtual in-
+ terface identified by the interface index."
+ REFERENCE
+ "OSPF Version 2, Appendix C.3 Router interface
+ parameters"
+ INDEX { ospfIfMetricIpAddress,
+ ospfIfMetricAddressLessIf,
+ ospfIfMetricTOS }
+ ::= { ospfIfMetricTable 1 }
+
+OspfIfMetricEntry ::=
+ SEQUENCE {
+ ospfIfMetricIpAddress
+ IpAddress,
+ ospfIfMetricAddressLessIf
+ Integer32,
+ ospfIfMetricTOS
+ TOSType,
+ ospfIfMetricValue
+ Metric,
+ ospfIfMetricStatus
+ RowStatus
+ }
+
+ ospfIfMetricIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP address of this OSPF interface. On row
+ creation, this can be derived from the in-
+ stance."
+ ::= { ospfIfMetricEntry 1 }
+
+ ospfIfMetricAddressLessIf OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "For the purpose of easing the instancing of
+ addressed and addressless interfaces; This
+ variable takes the value 0 on interfaces with
+ IP Addresses, and the value of ifIndex for in-
+ terfaces having no IP Address. On row crea-
+ tion, this can be derived from the instance."
+ ::= { ospfIfMetricEntry 2 }
+
+
+ ospfIfMetricTOS OBJECT-TYPE
+ SYNTAX TOSType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of service metric being referenced.
+ On row creation, this can be derived from the
+ instance."
+ ::= { ospfIfMetricEntry 3 }
+
+
+ ospfIfMetricValue OBJECT-TYPE
+ SYNTAX Metric
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The metric of using this type of service on
+ this interface. The default value of the TOS 0
+ Metric is 10^8 / ifSpeed."
+ ::= { ospfIfMetricEntry 4 }
+
+ ospfIfMetricStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This variable displays the status of the en-
+ try. Setting it to 'invalid' has the effect of
+ rendering it inoperative. The internal effect
+ (row removal) is implementation dependent."
+ ::= { ospfIfMetricEntry 5 }
+
+
+-- OSPF Virtual Interface Table
+
+-- The Virtual Interface Table describes the virtual
+-- links that the OSPF Process is configured to
+-- carry on.
+
+ ospfVirtIfTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OspfVirtIfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about this router's virtual inter-
+ faces."
+ REFERENCE
+ "OSPF Version 2, Appendix C.4 Virtual link
+ parameters"
+ ::= { ospf 9 }
+
+
+ ospfVirtIfEntry OBJECT-TYPE
+ SYNTAX OspfVirtIfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about a single Virtual Interface."
+ INDEX { ospfVirtIfAreaId, ospfVirtIfNeighbor }
+ ::= { ospfVirtIfTable 1 }
+
+OspfVirtIfEntry ::=
+ SEQUENCE {
+ ospfVirtIfAreaId
+ AreaID,
+ ospfVirtIfNeighbor
+ RouterID,
+ ospfVirtIfTransitDelay
+ UpToMaxAge,
+ ospfVirtIfRetransInterval
+ UpToMaxAge,
+ ospfVirtIfHelloInterval
+ HelloRange,
+ ospfVirtIfRtrDeadInterval
+ PositiveInteger,
+ ospfVirtIfState
+ INTEGER,
+ ospfVirtIfEvents
+ Counter32,
+ ospfVirtIfAuthType
+ INTEGER,
+ ospfVirtIfAuthKey
+ OCTET STRING,
+ ospfVirtIfStatus
+ RowStatus
+ }
+
+ ospfVirtIfAreaId OBJECT-TYPE
+ SYNTAX AreaID
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Transit Area that the Virtual Link
+ traverses. By definition, this is not 0.0.0.0"
+ ::= { ospfVirtIfEntry 1 }
+
+
+ ospfVirtIfNeighbor OBJECT-TYPE
+ SYNTAX RouterID
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Router ID of the Virtual Neighbor."
+ ::= { ospfVirtIfEntry 2 }
+
+
+ ospfVirtIfTransitDelay OBJECT-TYPE
+ SYNTAX UpToMaxAge
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The estimated number of seconds it takes to
+ transmit a link- state update packet over this
+ interface."
+ DEFVAL { 1 }
+ ::= { ospfVirtIfEntry 3 }
+
+
+ ospfVirtIfRetransInterval OBJECT-TYPE
+ SYNTAX UpToMaxAge
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The number of seconds between link-state ad-
+ vertisement retransmissions, for adjacencies
+ belonging to this interface. This value is
+ also used when retransmitting database descrip-
+ tion and link-state request packets. This
+ value should be well over the expected round-
+ trip time."
+ DEFVAL { 5 }
+ ::= { ospfVirtIfEntry 4 }
+
+
+ ospfVirtIfHelloInterval OBJECT-TYPE
+ SYNTAX HelloRange
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The length of time, in seconds, between the
+ Hello packets that the router sends on the in-
+ terface. This value must be the same for the
+ virtual neighbor."
+ DEFVAL { 10 }
+ ::= { ospfVirtIfEntry 5 }
+
+
+ ospfVirtIfRtrDeadInterval OBJECT-TYPE
+ SYNTAX PositiveInteger
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The number of seconds that a router's Hello
+ packets have not been seen before it's neigh-
+ bors declare the router down. This should be
+ some multiple of the Hello interval. This
+ value must be the same for the virtual neigh-
+ bor."
+ DEFVAL { 60 }
+ ::= { ospfVirtIfEntry 6 }
+
+
+ ospfVirtIfState OBJECT-TYPE
+ SYNTAX INTEGER {
+ down (1), -- these use the same encoding
+ pointToPoint (4) -- as the ospfIfTable
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "OSPF virtual interface states."
+ DEFVAL { down }
+ ::= { ospfVirtIfEntry 7 }
+
+
+ ospfVirtIfEvents OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of state changes or error events on
+ this Virtual Link"
+ ::= { ospfVirtIfEntry 8 }
+
+
+ ospfVirtIfAuthKey OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..256))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "If Authentication Type is simplePassword, the
+ device will left adjust and zero fill to 8 oc-
+ tets.
+
+ Note that unauthenticated interfaces need no
+ authentication key, and simple password authen-
+ tication cannot use a key of more than 8 oc-
+ tets. Larger keys are useful only with authen-
+ tication mechanisms not specified in this docu-
+ ment.
+
+ When read, ospfVifAuthKey always returns a
+ string of length zero."
+ REFERENCE
+ "OSPF Version 2, Section 9 The Interface Data
+ Structure"
+ DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0
+ ::= { ospfVirtIfEntry 9 }
+
+
+ ospfVirtIfStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This variable displays the status of the en-
+ try. Setting it to 'invalid' has the effect of
+ rendering it inoperative. The internal effect
+ (row removal) is implementation dependent."
+ ::= { ospfVirtIfEntry 10 }
+
+
+ ospfVirtIfAuthType OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ -- none (0),
+ -- simplePassword (1)
+ -- md5 (2)
+ -- reserved for specification by IANA (> 2)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The authentication type specified for a virtu-
+ al interface. Additional authentication types
+ may be assigned locally."
+ REFERENCE
+ "OSPF Version 2, Appendix E Authentication"
+ DEFVAL { 0 } -- no authentication, by default
+ ::= { ospfVirtIfEntry 11 }
+
+
+-- OSPF Neighbor Table
+
+-- The OSPF Neighbor Table describes all neighbors in
+-- the locality of the subject router.
+
+ ospfNbrTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OspfNbrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of non-virtual neighbor information."
+ REFERENCE
+ "OSPF Version 2, Section 10 The Neighbor Data
+ Structure"
+ ::= { ospf 10 }
+
+
+ ospfNbrEntry OBJECT-TYPE
+ SYNTAX OspfNbrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The information regarding a single neighbor."
+ REFERENCE
+ "OSPF Version 2, Section 10 The Neighbor Data
+ Structure"
+ INDEX { ospfNbrIpAddr, ospfNbrAddressLessIndex }
+ ::= { ospfNbrTable 1 }
+
+OspfNbrEntry ::=
+ SEQUENCE {
+ ospfNbrIpAddr
+ IpAddress,
+ ospfNbrAddressLessIndex
+ InterfaceIndex,
+ ospfNbrRtrId
+ RouterID,
+ ospfNbrOptions
+ Integer32,
+ ospfNbrPriority
+ DesignatedRouterPriority,
+ ospfNbrState
+ INTEGER,
+ ospfNbrEvents
+ Counter32,
+ ospfNbrLsRetransQLen
+ Gauge32,
+ ospfNbmaNbrStatus
+ RowStatus,
+ ospfNbmaNbrPermanence
+ INTEGER,
+ ospfNbrHelloSuppressed
+ TruthValue
+ }
+
+ ospfNbrIpAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP address this neighbor is using in its
+ IP Source Address. Note that, on addressless
+ links, this will not be 0.0.0.0, but the ad-
+ dress of another of the neighbor's interfaces."
+ ::= { ospfNbrEntry 1 }
+
+
+ ospfNbrAddressLessIndex OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "On an interface having an IP Address, zero.
+ On addressless interfaces, the corresponding
+ value of ifIndex in the Internet Standard MIB.
+ On row creation, this can be derived from the
+ instance."
+ ::= { ospfNbrEntry 2 }
+
+
+ ospfNbrRtrId OBJECT-TYPE
+ SYNTAX RouterID
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A 32-bit integer (represented as a type IpAd-
+ dress) uniquely identifying the neighboring
+ router in the Autonomous System."
+ DEFVAL { '00000000'H } -- 0.0.0.0
+ ::= { ospfNbrEntry 3 }
+
+
+ ospfNbrOptions OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A Bit Mask corresponding to the neighbor's op-
+ tions field.
+
+ Bit 0, if set, indicates that the system will
+ operate on Type of Service metrics other than
+ TOS 0. If zero, the neighbor will ignore all
+ metrics except the TOS 0 metric.
+
+ Bit 1, if set, indicates that the associated
+ area accepts and operates on external informa-
+ tion; if zero, it is a stub area.
+
+ Bit 2, if set, indicates that the system is ca-
+ pable of routing IP Multicast datagrams; i.e.,
+ that it implements the Multicast Extensions to
+ OSPF.
+
+ Bit 3, if set, indicates that the associated
+ area is an NSSA. These areas are capable of
+ carrying type 7 external advertisements, which
+ are translated into type 5 external advertise-
+ ments at NSSA borders."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.2 Options"
+ DEFVAL { 0 }
+ ::= { ospfNbrEntry 4 }
+
+
+ ospfNbrPriority OBJECT-TYPE
+ SYNTAX DesignatedRouterPriority
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The priority of this neighbor in the designat-
+ ed router election algorithm. The value 0 sig-
+ nifies that the neighbor is not eligible to be-
+ come the designated router on this particular
+ network."
+ DEFVAL { 1 }
+ ::= { ospfNbrEntry 5 }
+
+
+ ospfNbrState OBJECT-TYPE
+ SYNTAX INTEGER {
+ down (1),
+ attempt (2),
+ init (3),
+ twoWay (4),
+ exchangeStart (5),
+ exchange (6),
+ loading (7),
+ full (8)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The State of the relationship with this Neigh-
+ bor."
+ REFERENCE
+ "OSPF Version 2, Section 10.1 Neighbor States"
+ DEFVAL { down }
+ ::= { ospfNbrEntry 6 }
+
+
+ ospfNbrEvents OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times this neighbor relationship
+ has changed state, or an error has occurred."
+ ::= { ospfNbrEntry 7 }
+
+
+ ospfNbrLsRetransQLen OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current length of the retransmission
+ queue."
+ ::= { ospfNbrEntry 8 }
+
+
+ ospfNbmaNbrStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This variable displays the status of the en-
+ try. Setting it to 'invalid' has the effect of
+ rendering it inoperative. The internal effect
+ (row removal) is implementation dependent."
+ ::= { ospfNbrEntry 9 }
+
+
+ ospfNbmaNbrPermanence OBJECT-TYPE
+ SYNTAX INTEGER {
+ dynamic (1), -- learned through protocol
+ permanent (2) -- configured address
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable displays the status of the en-
+ try. 'dynamic' and 'permanent' refer to how
+ the neighbor became known."
+ DEFVAL { permanent }
+ ::= { ospfNbrEntry 10 }
+
+
+ ospfNbrHelloSuppressed OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether Hellos are being suppressed
+ to the neighbor"
+ ::= { ospfNbrEntry 11 }
+
+
+-- OSPF Virtual Neighbor Table
+
+-- This table describes all virtual neighbors.
+-- Since Virtual Links are configured in the
+-- virtual interface table, this table is read-only.
+
+ ospfVirtNbrTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OspfVirtNbrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of virtual neighbor information."
+ REFERENCE
+ "OSPF Version 2, Section 15 Virtual Links"
+ ::= { ospf 11 }
+
+
+ ospfVirtNbrEntry OBJECT-TYPE
+ SYNTAX OspfVirtNbrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Virtual neighbor information."
+ INDEX { ospfVirtNbrArea, ospfVirtNbrRtrId }
+ ::= { ospfVirtNbrTable 1 }
+
+OspfVirtNbrEntry ::=
+ SEQUENCE {
+ ospfVirtNbrArea
+ AreaID,
+ ospfVirtNbrRtrId
+ RouterID,
+ ospfVirtNbrIpAddr
+ IpAddress,
+ ospfVirtNbrOptions
+ Integer32,
+ ospfVirtNbrState
+ INTEGER,
+ ospfVirtNbrEvents
+ Counter32,
+ ospfVirtNbrLsRetransQLen
+ Gauge32,
+ ospfVirtNbrHelloSuppressed
+ TruthValue
+ }
+
+ ospfVirtNbrArea OBJECT-TYPE
+ SYNTAX AreaID
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Transit Area Identifier."
+ ::= { ospfVirtNbrEntry 1 }
+
+
+ ospfVirtNbrRtrId OBJECT-TYPE
+ SYNTAX RouterID
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A 32-bit integer uniquely identifying the
+ neighboring router in the Autonomous System."
+ ::= { ospfVirtNbrEntry 2 }
+
+
+ ospfVirtNbrIpAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP address this Virtual Neighbor is us-
+ ing."
+ ::= { ospfVirtNbrEntry 3 }
+
+
+ ospfVirtNbrOptions OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A Bit Mask corresponding to the neighbor's op-
+ tions field.
+
+ Bit 1, if set, indicates that the system will
+ operate on Type of Service metrics other than
+ TOS 0. If zero, the neighbor will ignore all
+ metrics except the TOS 0 metric.
+
+ Bit 2, if set, indicates that the system is
+ Network Multicast capable; ie, that it imple-
+ ments OSPF Multicast Routing."
+ ::= { ospfVirtNbrEntry 4 }
+ ospfVirtNbrState OBJECT-TYPE
+ SYNTAX INTEGER {
+ down (1),
+ attempt (2),
+ init (3),
+ twoWay (4),
+ exchangeStart (5),
+ exchange (6),
+ loading (7),
+ full (8)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The state of the Virtual Neighbor Relation-
+ ship."
+ ::= { ospfVirtNbrEntry 5 }
+
+
+ ospfVirtNbrEvents OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times this virtual link has
+ changed its state, or an error has occurred."
+ ::= { ospfVirtNbrEntry 6 }
+
+
+ ospfVirtNbrLsRetransQLen OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current length of the retransmission
+ queue."
+ ::= { ospfVirtNbrEntry 7 }
+
+
+ ospfVirtNbrHelloSuppressed OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether Hellos are being suppressed
+ to the neighbor"
+ ::= { ospfVirtNbrEntry 8 }
+
+-- OSPF Link State Database, External
+
+-- The Link State Database contains the Link State
+-- Advertisements from throughout the areas that the
+-- device is attached to.
+
+-- This table is identical to the OSPF LSDB Table in
+-- format, but contains only External Link State
+-- Advertisements. The purpose is to allow external
+-- LSAs to be displayed once for the router rather
+-- than once in each non-stub area.
+
+ ospfExtLsdbTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OspfExtLsdbEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The OSPF Process's Links State Database."
+ REFERENCE
+ "OSPF Version 2, Section 12 Link State Adver-
+ tisements"
+ ::= { ospf 12 }
+
+
+ ospfExtLsdbEntry OBJECT-TYPE
+ SYNTAX OspfExtLsdbEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A single Link State Advertisement."
+ INDEX { ospfExtLsdbType, ospfExtLsdbLsid, ospfExtLsdbRouterId }
+ ::= { ospfExtLsdbTable 1 }
+
+OspfExtLsdbEntry ::=
+ SEQUENCE {
+ ospfExtLsdbType
+ INTEGER,
+ ospfExtLsdbLsid
+ IpAddress,
+ ospfExtLsdbRouterId
+ RouterID,
+ ospfExtLsdbSequence
+ Integer32,
+ ospfExtLsdbAge
+ Integer32,
+ ospfExtLsdbChecksum
+ Integer32,
+ ospfExtLsdbAdvertisement
+ OCTET STRING
+ }
+
+ ospfExtLsdbType OBJECT-TYPE
+ SYNTAX INTEGER {
+ asExternalLink (5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of the link state advertisement.
+ Each link state type has a separate advertise-
+ ment format."
+ REFERENCE
+ "OSPF Version 2, Appendix A.4.1 The Link State
+ Advertisement header"
+ ::= { ospfExtLsdbEntry 1 }
+
+
+ ospfExtLsdbLsid OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Link State ID is an LS Type Specific field
+ containing either a Router ID or an IP Address;
+ it identifies the piece of the routing domain
+ that is being described by the advertisement."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.4 Link State ID"
+ ::= { ospfExtLsdbEntry 2 }
+
+
+ ospfExtLsdbRouterId OBJECT-TYPE
+ SYNTAX RouterID
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The 32 bit number that uniquely identifies the
+ originating router in the Autonomous System."
+ REFERENCE
+ "OSPF Version 2, Appendix C.1 Global parameters"
+ ::= { ospfExtLsdbEntry 3 }
+
+-- Note that the OSPF Sequence Number is a 32 bit signed
+-- integer. It starts with the value '80000001'h,
+-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
+-- Thus, a typical sequence number will be very negative.
+ ospfExtLsdbSequence OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The sequence number field is a signed 32-bit
+ integer. It is used to detect old and dupli-
+ cate link state advertisements. The space of
+ sequence numbers is linearly ordered. The
+ larger the sequence number the more recent the
+ advertisement."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.6 LS sequence
+ number"
+ ::= { ospfExtLsdbEntry 4 }
+
+
+ ospfExtLsdbAge OBJECT-TYPE
+ SYNTAX Integer32 -- Should be 0..MaxAge
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This field is the age of the link state adver-
+ tisement in seconds."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.1 LS age"
+ ::= { ospfExtLsdbEntry 5 }
+
+
+ ospfExtLsdbChecksum OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This field is the checksum of the complete
+ contents of the advertisement, excepting the
+ age field. The age field is excepted so that
+ an advertisement's age can be incremented
+ without updating the checksum. The checksum
+ used is the same that is used for ISO connec-
+ tionless datagrams; it is commonly referred to
+ as the Fletcher checksum."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.7 LS checksum"
+ ::= { ospfExtLsdbEntry 6 }
+
+
+ ospfExtLsdbAdvertisement OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(36))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The entire Link State Advertisement, including
+ its header."
+ REFERENCE
+ "OSPF Version 2, Section 12 Link State Adver-
+ tisements"
+ ::= { ospfExtLsdbEntry 7 }
+
+
+-- OSPF Use of the CIDR Route Table
+
+ospfRouteGroup OBJECT IDENTIFIER ::= { ospf 13 }
+
+-- The IP Forwarding Table defines a number of objects for use by
+-- the routing protocol to externalize its information. Most of
+-- the variables (ipForwardDest, ipForwardMask, ipForwardPolicy,
+-- ipForwardNextHop, ipForwardIfIndex, ipForwardType,
+-- ipForwardProto, ipForwardAge, and ipForwardNextHopAS) are
+-- defined there.
+
+-- Those that leave some discretion are defined here.
+
+-- ipCidrRouteProto is, of course, ospf (13).
+
+-- ipCidrRouteAge is the time since the route was first calculated,
+-- as opposed to the time since the last SPF run.
+
+-- ipCidrRouteInfo is an OBJECT IDENTIFIER for use by the routing
+-- protocol. The following values shall be found there depending
+-- on the way the route was calculated.
+
+ospfIntraArea OBJECT IDENTIFIER ::= { ospfRouteGroup 1 }
+ospfInterArea OBJECT IDENTIFIER ::= { ospfRouteGroup 2 }
+ospfExternalType1 OBJECT IDENTIFIER ::= { ospfRouteGroup 3 }
+ospfExternalType2 OBJECT IDENTIFIER ::= { ospfRouteGroup 4 }
+
+-- ipCidrRouteMetric1 is, by definition, the primary routing
+-- metric. Therefore, it should be the metric that route
+-- selection is based on. For intra-area and inter-area routes,
+-- it is an OSPF metric. For External Type 1 (comparable value)
+-- routes, it is an OSPF metric plus the External Metric. For
+-- external Type 2 (non-comparable value) routes, it is the
+-- external metric.
+
+-- ipCidrRouteMetric2 is, by definition, a secondary routing
+-- metric. Therefore, it should be the metric that breaks a tie
+-- among routes having equal metric1 values and the same
+-- calculation rule. For intra-area, inter-area routes, and
+-- External Type 1 (comparable value) routes, it is unused. For
+-- external Type 2 (non-comparable value) routes, it is the metric
+-- to the AS border router.
+
+-- ipCidrRouteMetric3, ipCidrRouteMetric4, and ipCidrRouteMetric5 are
+-- unused.
+
+--
+-- The OSPF Area Aggregate Table
+--
+-- This table replaces the OSPF Area Summary Table, being an
+-- extension of that for CIDR routers.
+
+ ospfAreaAggregateTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OspfAreaAggregateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A range of IP addresses specified by an IP
+ address/IP network mask pair. For example,
+ class B address range of X.X.X.X with a network
+ mask of 255.255.0.0 includes all IP addresses
+ from X.X.0.0 to X.X.255.255. Note that if
+ ranges are configured such that one range sub-
+ sumes another range (e.g., 10.0.0.0 mask
+ 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the
+ most specific match is the preferred one."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ ::= { ospf 14 }
+
+
+ ospfAreaAggregateEntry OBJECT-TYPE
+ SYNTAX OspfAreaAggregateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A range of IP addresses specified by an IP
+ address/IP network mask pair. For example,
+ class B address range of X.X.X.X with a network
+ mask of 255.255.0.0 includes all IP addresses
+ from X.X.0.0 to X.X.255.255. Note that if
+ ranges are range configured such that one range
+ subsumes another range (e.g., 10.0.0.0 mask
+ 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the
+ most specific match is the preferred one."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ INDEX { ospfAreaAggregateAreaID, ospfAreaAggregateLsdbType,
+ ospfAreaAggregateNet, ospfAreaAggregateMask }
+ ::= { ospfAreaAggregateTable 1 }
+
+
+OspfAreaAggregateEntry ::=
+ SEQUENCE {
+ ospfAreaAggregateAreaID
+ AreaID,
+ ospfAreaAggregateLsdbType
+ INTEGER,
+ ospfAreaAggregateNet
+ IpAddress,
+ ospfAreaAggregateMask
+ IpAddress,
+ ospfAreaAggregateStatus
+ RowStatus,
+ ospfAreaAggregateEffect
+ INTEGER
+ }
+
+ ospfAreaAggregateAreaID OBJECT-TYPE
+ SYNTAX AreaID
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Area the Address Aggregate is to be found
+ within."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ ::= { ospfAreaAggregateEntry 1 }
+
+
+ ospfAreaAggregateLsdbType OBJECT-TYPE
+ SYNTAX INTEGER {
+ summaryLink (3),
+ nssaExternalLink (7)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of the Address Aggregate. This field
+ specifies the Lsdb type that this Address Ag-
+ gregate applies to."
+ REFERENCE
+ "OSPF Version 2, Appendix A.4.1 The Link State
+ Advertisement header"
+ ::= { ospfAreaAggregateEntry 2 }
+
+
+ ospfAreaAggregateNet OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP Address of the Net or Subnet indicated
+ by the range."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ ::= { ospfAreaAggregateEntry 3 }
+
+
+ ospfAreaAggregateMask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Subnet Mask that pertains to the Net or
+ Subnet."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ ::= { ospfAreaAggregateEntry 4 }
+
+
+ ospfAreaAggregateStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This variable displays the status of the en-
+ try. Setting it to 'invalid' has the effect of
+ rendering it inoperative. The internal effect
+ (row removal) is implementation dependent."
+ ::= { ospfAreaAggregateEntry 5 }
+
+
+ ospfAreaAggregateEffect OBJECT-TYPE
+ SYNTAX INTEGER {
+ advertiseMatching (1),
+ doNotAdvertiseMatching (2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Subnets subsumed by ranges either trigger the
+ advertisement of the indicated aggregate (ad-
+ vertiseMatching), or result in the subnet's not
+ being advertised at all outside the area."
+ DEFVAL { advertiseMatching }
+ ::= { ospfAreaAggregateEntry 6 }
+
+
+-- conformance information
+
+ospfConformance OBJECT IDENTIFIER ::= { ospf 15 }
+
+ospfGroups OBJECT IDENTIFIER ::= { ospfConformance 1 }
+ospfCompliances OBJECT IDENTIFIER ::= { ospfConformance 2 }
+
+-- compliance statements
+
+ ospfCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement "
+ MODULE -- this module
+ MANDATORY-GROUPS {
+ ospfBasicGroup,
+ ospfAreaGroup,
+ ospfStubAreaGroup,
+ ospfIfGroup,
+ ospfIfMetricGroup,
+ ospfVirtIfGroup,
+ ospfNbrGroup,
+ ospfVirtNbrGroup,
+ ospfAreaAggregateGroup
+ }
+ ::= { ospfCompliances 1 }
+
+
+-- units of conformance
+
+ ospfBasicGroup OBJECT-GROUP
+ OBJECTS {
+ ospfRouterId,
+ ospfAdminStat,
+ ospfVersionNumber,
+ ospfAreaBdrRtrStatus,
+ ospfASBdrRtrStatus,
+ ospfExternLsaCount,
+ ospfExternLsaCksumSum,
+ ospfTOSSupport,
+ ospfOriginateNewLsas,
+ ospfRxNewLsas,
+ ospfExtLsdbLimit,
+ ospfMulticastExtensions,
+ ospfExitOverflowInterval,
+ ospfDemandExtensions
+ }
+ STATUS current
+ DESCRIPTION
+ "These objects are required for OSPF systems."
+ ::= { ospfGroups 1 }
+
+
+ ospfAreaGroup OBJECT-GROUP
+ OBJECTS {
+ ospfAreaId,
+ ospfImportAsExtern,
+ ospfSpfRuns,
+ ospfAreaBdrRtrCount,
+ ospfAsBdrRtrCount,
+ ospfAreaLsaCount,
+ ospfAreaLsaCksumSum,
+ ospfAreaSummary,
+ ospfAreaStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "These objects are required for OSPF systems
+ supporting areas."
+ ::= { ospfGroups 2 }
+
+
+ ospfStubAreaGroup OBJECT-GROUP
+ OBJECTS {
+ ospfStubAreaId,
+ ospfStubTOS,
+ ospfStubMetric,
+ ospfStubStatus,
+ ospfStubMetricType
+ }
+ STATUS current
+ DESCRIPTION
+ "These objects are required for OSPF systems
+ supporting stub areas."
+ ::= { ospfGroups 3 }
+
+
+ ospfLsdbGroup OBJECT-GROUP
+ OBJECTS {
+ ospfLsdbAreaId,
+ ospfLsdbType,
+ ospfLsdbLsid,
+ ospfLsdbRouterId,
+ ospfLsdbSequence,
+ ospfLsdbAge,
+ ospfLsdbChecksum,
+ ospfLsdbAdvertisement
+ }
+ STATUS current
+ DESCRIPTION
+ "These objects are required for OSPF systems
+ that display their link state database."
+ ::= { ospfGroups 4 }
+
+
+ ospfAreaRangeGroup OBJECT-GROUP
+ OBJECTS {
+ ospfAreaRangeAreaId,
+ ospfAreaRangeNet,
+ ospfAreaRangeMask,
+ ospfAreaRangeStatus,
+ ospfAreaRangeEffect
+ }
+ STATUS obsolete
+ DESCRIPTION
+ "These objects are required for non-CIDR OSPF
+ systems that support multiple areas."
+ ::= { ospfGroups 5 }
+
+
+ ospfHostGroup OBJECT-GROUP
+ OBJECTS {
+ ospfHostIpAddress,
+ ospfHostTOS,
+ ospfHostMetric,
+ ospfHostStatus,
+ ospfHostAreaID
+ }
+ STATUS current
+ DESCRIPTION
+ "These objects are required for OSPF systems
+ that support attached hosts."
+ ::= { ospfGroups 6 }
+
+
+ ospfIfGroup OBJECT-GROUP
+ OBJECTS {
+ ospfIfIpAddress,
+ ospfAddressLessIf,
+ ospfIfAreaId,
+ ospfIfType,
+ ospfIfAdminStat,
+ ospfIfRtrPriority,
+ ospfIfTransitDelay,
+ ospfIfRetransInterval,
+ ospfIfHelloInterval,
+ ospfIfRtrDeadInterval,
+ ospfIfPollInterval,
+ ospfIfState,
+ ospfIfDesignatedRouter,
+ ospfIfBackupDesignatedRouter,
+ ospfIfEvents,
+ ospfIfAuthType,
+ ospfIfAuthKey,
+ ospfIfStatus,
+ ospfIfMulticastForwarding,
+ ospfIfDemand
+ }
+ STATUS current
+ DESCRIPTION
+ "These objects are required for OSPF systems."
+ ::= { ospfGroups 7 }
+
+
+ ospfIfMetricGroup OBJECT-GROUP
+ OBJECTS {
+ ospfIfMetricIpAddress,
+ ospfIfMetricAddressLessIf,
+ ospfIfMetricTOS,
+ ospfIfMetricValue,
+ ospfIfMetricStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "These objects are required for OSPF systems."
+ ::= { ospfGroups 8 }
+
+
+ ospfVirtIfGroup OBJECT-GROUP
+ OBJECTS {
+ ospfVirtIfAreaId,
+ ospfVirtIfNeighbor,
+ ospfVirtIfTransitDelay,
+ ospfVirtIfRetransInterval,
+ ospfVirtIfHelloInterval,
+ ospfVirtIfRtrDeadInterval,
+ ospfVirtIfState,
+ ospfVirtIfEvents,
+ ospfVirtIfAuthType,
+ ospfVirtIfAuthKey,
+ ospfVirtIfStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "These objects are required for OSPF systems."
+ ::= { ospfGroups 9 }
+
+
+ ospfNbrGroup OBJECT-GROUP
+ OBJECTS {
+ ospfNbrIpAddr,
+ ospfNbrAddressLessIndex,
+ ospfNbrRtrId,
+ ospfNbrOptions,
+ ospfNbrPriority,
+ ospfNbrState,
+ ospfNbrEvents,
+ ospfNbrLsRetransQLen,
+ ospfNbmaNbrStatus,
+ ospfNbmaNbrPermanence,
+ ospfNbrHelloSuppressed
+ }
+ STATUS current
+ DESCRIPTION
+ "These objects are required for OSPF systems."
+ ::= { ospfGroups 10 }
+
+
+ ospfVirtNbrGroup OBJECT-GROUP
+ OBJECTS {
+ ospfVirtNbrArea,
+ ospfVirtNbrRtrId,
+ ospfVirtNbrIpAddr,
+ ospfVirtNbrOptions,
+ ospfVirtNbrState,
+ ospfVirtNbrEvents,
+ ospfVirtNbrLsRetransQLen,
+ ospfVirtNbrHelloSuppressed
+ }
+ STATUS current
+ DESCRIPTION
+ "These objects are required for OSPF systems."
+ ::= { ospfGroups 11 }
+
+
+ ospfExtLsdbGroup OBJECT-GROUP
+ OBJECTS {
+ ospfExtLsdbType,
+ ospfExtLsdbLsid,
+ ospfExtLsdbRouterId,
+ ospfExtLsdbSequence,
+ ospfExtLsdbAge,
+ ospfExtLsdbChecksum,
+ ospfExtLsdbAdvertisement
+ }
+ STATUS current
+ DESCRIPTION
+ "These objects are required for OSPF systems
+ that display their link state database."
+ ::= { ospfGroups 12 }
+
+
+ ospfAreaAggregateGroup OBJECT-GROUP
+ OBJECTS {
+ ospfAreaAggregateAreaID,
+ ospfAreaAggregateLsdbType,
+ ospfAreaAggregateNet,
+ ospfAreaAggregateMask,
+ ospfAreaAggregateStatus,
+ ospfAreaAggregateEffect
+ }
+ STATUS current
+ DESCRIPTION
+ "These objects are required for OSPF systems."
+ ::= { ospfGroups 13 }
+
+END
--- /dev/null
+++ b/mibs/OSPF-TRAP-MIB.txt
@@ -0,0 +1,443 @@
+OSPF-TRAP-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress
+ FROM SNMPv2-SMI
+ MODULE-COMPLIANCE, OBJECT-GROUP
+ FROM SNMPv2-CONF
+ ospfRouterId, ospfIfIpAddress, ospfAddressLessIf, ospfIfState,
+ ospfVirtIfAreaId, ospfVirtIfNeighbor, ospfVirtIfState,
+ ospfNbrIpAddr, ospfNbrAddressLessIndex, ospfNbrRtrId,
+ ospfNbrState, ospfVirtNbrArea, ospfVirtNbrRtrId, ospfVirtNbrState,
+ ospfLsdbType, ospfLsdbLsid, ospfLsdbRouterId, ospfLsdbAreaId,
+ ospfExtLsdbLimit, ospf
+ FROM OSPF-MIB;
+
+ ospfTrap MODULE-IDENTITY
+ LAST-UPDATED "9501201225Z" -- Fri Jan 20 12:25:50 PST 1995
+ ORGANIZATION "IETF OSPF Working Group"
+ CONTACT-INFO
+ " Fred Baker
+ Postal: Cisco Systems
+ 519 Lado Drive
+ Santa Barbara, California 93111
+ Tel: +1 805 681 0115
+ E-Mail: fred@cisco.com
+
+ Rob Coltun
+ Postal: RainbowBridge Communications
+ Tel: (301) 340-9416
+ E-Mail: rcoltun@rainbow-bridge.com"
+ DESCRIPTION
+ "The MIB module to describe traps for the OSPF
+ Version 2 Protocol."
+ ::= { ospf 16 }
+
+-- Trap Support Objects
+
+-- The following are support objects for the OSPF traps.
+
+ospfTrapControl OBJECT IDENTIFIER ::= { ospfTrap 1 }
+ospfTraps OBJECT IDENTIFIER ::= { ospfTrap 2 }
+
+ ospfSetTrap OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(4))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "A four-octet string serving as a bit map for
+ the trap events defined by the OSPF traps. This
+ object is used to enable and disable specific
+ OSPF traps where a 1 in the bit field
+ represents enabled. The right-most bit (least
+ significant) represents trap 0."
+ ::= { ospfTrapControl 1 }
+
+
+ ospfConfigErrorType OBJECT-TYPE
+ SYNTAX INTEGER {
+ badVersion (1),
+ areaMismatch (2),
+ unknownNbmaNbr (3), -- Router is Dr eligible
+ unknownVirtualNbr (4),
+ authTypeMismatch(5),
+ authFailure (6),
+ netMaskMismatch (7),
+ helloIntervalMismatch (8),
+ deadIntervalMismatch (9),
+ optionMismatch (10) }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Potential types of configuration conflicts.
+ Used by the ospfConfigError and ospfConfigVir-
+ tError traps."
+ ::= { ospfTrapControl 2 }
+
+
+ ospfPacketType OBJECT-TYPE
+ SYNTAX INTEGER {
+ hello (1),
+ dbDescript (2),
+ lsReq (3),
+ lsUpdate (4),
+ lsAck (5) }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "OSPF packet types."
+ ::= { ospfTrapControl 3 }
+
+
+ ospfPacketSrc OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP address of an inbound packet that can-
+ not be identified by a neighbor instance."
+ ::= { ospfTrapControl 4 }
+
+
+-- Traps
+
+
+ ospfIfStateChange NOTIFICATION-TYPE
+ OBJECTS {
+ ospfRouterId, -- The originator of the trap
+ ospfIfIpAddress,
+ ospfAddressLessIf,
+ ospfIfState -- The new state
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfIfStateChange trap signifies that there
+ has been a change in the state of a non-virtual
+ OSPF interface. This trap should be generated
+ when the interface state regresses (e.g., goes
+ from Dr to Down) or progresses to a terminal
+ state (i.e., Point-to-Point, DR Other, Dr, or
+ Backup)."
+ ::= { ospfTraps 16 }
+
+
+ ospfVirtIfStateChange NOTIFICATION-TYPE
+ OBJECTS {
+ ospfRouterId, -- The originator of the trap
+ ospfVirtIfAreaId,
+ ospfVirtIfNeighbor,
+ ospfVirtIfState -- The new state
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfIfStateChange trap signifies that there
+ has been a change in the state of an OSPF vir-
+ tual interface.
+ This trap should be generated when the inter-
+ face state regresses (e.g., goes from Point-
+ to-Point to Down) or progresses to a terminal
+ state (i.e., Point-to-Point)."
+ ::= { ospfTraps 1 }
+
+
+ ospfNbrStateChange NOTIFICATION-TYPE
+ OBJECTS {
+ ospfRouterId, -- The originator of the trap
+ ospfNbrIpAddr,
+ ospfNbrAddressLessIndex,
+ ospfNbrRtrId,
+ ospfNbrState -- The new state
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfNbrStateChange trap signifies that
+ there has been a change in the state of a non-
+ virtual OSPF neighbor. This trap should be
+ generated when the neighbor state regresses
+ (e.g., goes from Attempt or Full to 1-Way or
+ Down) or progresses to a terminal state (e.g.,
+ 2-Way or Full). When an neighbor transitions
+ from or to Full on non-broadcast multi-access
+ and broadcast networks, the trap should be gen-
+ erated by the designated router. A designated
+ router transitioning to Down will be noted by
+ ospfIfStateChange."
+ ::= { ospfTraps 2 }
+
+
+ ospfVirtNbrStateChange NOTIFICATION-TYPE
+ OBJECTS {
+ ospfRouterId, -- The originator of the trap
+ ospfVirtNbrArea,
+ ospfVirtNbrRtrId,
+ ospfVirtNbrState -- The new state
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfIfStateChange trap signifies that there
+ has been a change in the state of an OSPF vir-
+ tual neighbor. This trap should be generated
+ when the neighbor state regresses (e.g., goes
+ from Attempt or Full to 1-Way or Down) or
+ progresses to a terminal state (e.g., Full)."
+ ::= { ospfTraps 3 }
+ ospfIfConfigError NOTIFICATION-TYPE
+ OBJECTS {
+ ospfRouterId, -- The originator of the trap
+ ospfIfIpAddress,
+ ospfAddressLessIf,
+ ospfPacketSrc, -- The source IP address
+ ospfConfigErrorType, -- Type of error
+ ospfPacketType
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfIfConfigError trap signifies that a
+ packet has been received on a non-virtual in-
+ terface from a router whose configuration
+ parameters conflict with this router's confi-
+ guration parameters. Note that the event op-
+ tionMismatch should cause a trap only if it
+ prevents an adjacency from forming."
+ ::= { ospfTraps 4 }
+
+
+ ospfVirtIfConfigError NOTIFICATION-TYPE
+ OBJECTS {
+ ospfRouterId, -- The originator of the trap
+ ospfVirtIfAreaId,
+ ospfVirtIfNeighbor,
+ ospfConfigErrorType, -- Type of error
+ ospfPacketType
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfConfigError trap signifies that a pack-
+ et has been received on a virtual interface
+ from a router whose configuration parameters
+ conflict with this router's configuration
+ parameters. Note that the event optionMismatch
+ should cause a trap only if it prevents an ad-
+ jacency from forming."
+ ::= { ospfTraps 5 }
+
+
+ ospfIfAuthFailure NOTIFICATION-TYPE
+ OBJECTS {
+ ospfRouterId, -- The originator of the trap
+ ospfIfIpAddress,
+ ospfAddressLessIf,
+ ospfPacketSrc, -- The source IP address
+ ospfConfigErrorType, -- authTypeMismatch or
+ -- authFailure
+ ospfPacketType
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfIfAuthFailure trap signifies that a
+ packet has been received on a non-virtual in-
+ terface from a router whose authentication key
+ or authentication type conflicts with this
+ router's authentication key or authentication
+ type."
+ ::= { ospfTraps 6 }
+
+
+ ospfVirtIfAuthFailure NOTIFICATION-TYPE
+ OBJECTS {
+ ospfRouterId, -- The originator of the trap
+ ospfVirtIfAreaId,
+ ospfVirtIfNeighbor,
+ ospfConfigErrorType, -- authTypeMismatch or
+ -- authFailure
+ ospfPacketType
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfVirtIfAuthFailure trap signifies that a
+ packet has been received on a virtual interface
+ from a router whose authentication key or au-
+ thentication type conflicts with this router's
+ authentication key or authentication type."
+ ::= { ospfTraps 7 }
+
+
+ ospfIfRxBadPacket NOTIFICATION-TYPE
+ OBJECTS {
+ ospfRouterId, -- The originator of the trap
+ ospfIfIpAddress,
+ ospfAddressLessIf,
+ ospfPacketSrc, -- The source IP address
+ ospfPacketType
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfIfRxBadPacket trap signifies that an
+ OSPF packet has been received on a non-virtual
+ interface that cannot be parsed."
+ ::= { ospfTraps 8 }
+
+ ospfVirtIfRxBadPacket NOTIFICATION-TYPE
+ OBJECTS {
+ ospfRouterId, -- The originator of the trap
+ ospfVirtIfAreaId,
+ ospfVirtIfNeighbor,
+ ospfPacketType
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfRxBadPacket trap signifies that an OSPF
+ packet has been received on a virtual interface
+ that cannot be parsed."
+ ::= { ospfTraps 9 }
+
+
+ ospfTxRetransmit NOTIFICATION-TYPE
+ OBJECTS {
+ ospfRouterId, -- The originator of the trap
+ ospfIfIpAddress,
+ ospfAddressLessIf,
+ ospfNbrRtrId, -- Destination
+ ospfPacketType,
+ ospfLsdbType,
+ ospfLsdbLsid,
+ ospfLsdbRouterId
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfTxRetransmit trap signifies than an
+ OSPF packet has been retransmitted on a non-
+ virtual interface. All packets that may be re-
+ transmitted are associated with an LSDB entry.
+ The LS type, LS ID, and Router ID are used to
+ identify the LSDB entry."
+ ::= { ospfTraps 10 }
+
+
+ ospfVirtIfTxRetransmit NOTIFICATION-TYPE
+ OBJECTS {
+ ospfRouterId, -- The originator of the trap
+ ospfVirtIfAreaId,
+ ospfVirtIfNeighbor,
+ ospfPacketType,
+ ospfLsdbType,
+ ospfLsdbLsid,
+ ospfLsdbRouterId
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfTxRetransmit trap signifies than an
+ OSPF packet has been retransmitted on a virtual
+ interface. All packets that may be retransmit-
+ ted are associated with an LSDB entry. The LS
+ type, LS ID, and Router ID are used to identify
+ the LSDB entry."
+ ::= { ospfTraps 11 }
+
+
+ ospfOriginateLsa NOTIFICATION-TYPE
+ OBJECTS {
+ ospfRouterId, -- The originator of the trap
+ ospfLsdbAreaId, -- 0.0.0.0 for AS Externals
+ ospfLsdbType,
+ ospfLsdbLsid,
+ ospfLsdbRouterId
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfOriginateLsa trap signifies that a new
+ LSA has been originated by this router. This
+ trap should not be invoked for simple refreshes
+ of LSAs (which happesn every 30 minutes), but
+ instead will only be invoked when an LSA is
+ (re)originated due to a topology change. Addi-
+ tionally, this trap does not include LSAs that
+ are being flushed because they have reached
+ MaxAge."
+ ::= { ospfTraps 12 }
+
+
+ ospfMaxAgeLsa NOTIFICATION-TYPE
+ OBJECTS {
+ ospfRouterId, -- The originator of the trap
+ ospfLsdbAreaId, -- 0.0.0.0 for AS Externals
+ ospfLsdbType,
+ ospfLsdbLsid,
+ ospfLsdbRouterId
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfMaxAgeLsa trap signifies that one of
+ the LSA in the router's link-state database has
+ aged to MaxAge."
+ ::= { ospfTraps 13 }
+
+
+ ospfLsdbOverflow NOTIFICATION-TYPE
+ OBJECTS {
+ ospfRouterId, -- The originator of the trap
+ ospfExtLsdbLimit
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfLsdbOverflow trap signifies that the
+ number of LSAs in the router's link-state data-
+ base has exceeded ospfExtLsdbLimit."
+ ::= { ospfTraps 14 }
+
+
+ ospfLsdbApproachingOverflow NOTIFICATION-TYPE
+ OBJECTS {
+ ospfRouterId, -- The originator of the trap
+ ospfExtLsdbLimit
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfLsdbApproachingOverflow trap signifies
+ that the number of LSAs in the router's link-
+ state database has exceeded ninety percent of
+ ospfExtLsdbLimit."
+ ::= { ospfTraps 15 }
+
+
+-- conformance information
+
+ospfTrapConformance OBJECT IDENTIFIER ::= { ospfTrap 3 }
+
+ospfTrapGroups OBJECT IDENTIFIER ::= { ospfTrapConformance 1 }
+ospfTrapCompliances OBJECT IDENTIFIER ::= { ospfTrapConformance 2 }
+
+-- compliance statements
+
+ ospfTrapCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement "
+ MODULE -- this module
+ MANDATORY-GROUPS { ospfTrapControlGroup }
+
+
+ GROUP ospfTrapControlGroup
+ DESCRIPTION
+ "This group is optional but recommended for all
+ OSPF systems"
+ ::= { ospfTrapCompliances 1 }
+
+
+-- units of conformance
+
+ ospfTrapControlGroup OBJECT-GROUP
+ OBJECTS {
+ ospfSetTrap,
+ ospfConfigErrorType,
+ ospfPacketType,
+ ospfPacketSrc
+ }
+ STATUS current
+ DESCRIPTION
+ "These objects are required to control traps
+ from OSPF systems."
+ ::= { ospfTrapGroups 1 }
+
+
+END
--- /dev/null
+++ b/mibs/RIPv2-MIB.txt
@@ -0,0 +1,530 @@
+ RIPv2-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, Counter32,
+ TimeTicks, IpAddress FROM SNMPv2-SMI
+ TEXTUAL-CONVENTION, RowStatus FROM SNMPv2-TC
+ MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
+ mib-2 FROM RFC1213-MIB;
+
+ -- This MIB module uses the extended OBJECT-TYPE macro as
+ -- defined in [9].
+
+ rip2 MODULE-IDENTITY
+ LAST-UPDATED "9407272253Z" -- Wed Jul 27 22:53:04 PDT 1994
+ ORGANIZATION "IETF RIP-II Working Group"
+ CONTACT-INFO
+ " Fred Baker
+ Postal: Cisco Systems
+ 519 Lado Drive
+ Santa Barbara, California 93111
+ Tel: +1 805 681 0115
+ E-Mail: fbaker@cisco.com
+
+ Postal: Gary Malkin
+ Xylogics, Inc.
+ 53 Third Avenue
+ Burlington, MA 01803
+
+ Phone: (617) 272-8140
+ EMail: gmalkin@Xylogics.COM"
+ DESCRIPTION
+ "The MIB module to describe the RIP2 Version 2 Protocol"
+ ::= { mib-2 23 }
+
+ -- RIP-2 Management Information Base
+
+ -- the RouteTag type represents the contents of the
+ -- Route Domain field in the packet header or route entry.
+ -- The use of the Route Domain is deprecated.
+
+ RouteTag ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "the RouteTag type represents the contents of the Route Domain
+ field in the packet header or route entry"
+ SYNTAX OCTET STRING (SIZE (2))
+
+--4.1 Global Counters
+
+-- The RIP-2 Globals Group.
+-- Implementation of this group is mandatory for systems
+-- which implement RIP-2.
+
+-- These counters are intended to facilitate debugging quickly
+-- changing routes or failing neighbors
+
+rip2Globals OBJECT IDENTIFIER ::= { rip2 1 }
+
+ rip2GlobalRouteChanges OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of route changes made to the IP Route
+ Database by RIP. This does not include the refresh
+ of a route's age."
+ ::= { rip2Globals 1 }
+
+ rip2GlobalQueries OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of responses sent to RIP queries
+ from other systems."
+ ::= { rip2Globals 2 }
+
+--4.2 RIP Interface Tables
+
+-- RIP Interfaces Groups
+-- Implementation of these Groups is mandatory for systems
+-- which implement RIP-2.
+
+-- The RIP Interface Status Table.
+
+ rip2IfStatTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Rip2IfStatEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of subnets which require separate
+ status monitoring in RIP."
+ ::= { rip2 2 }
+
+ rip2IfStatEntry OBJECT-TYPE
+ SYNTAX Rip2IfStatEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A Single Routing Domain in a single Subnet."
+ INDEX { rip2IfStatAddress }
+ ::= { rip2IfStatTable 1 }
+
+ Rip2IfStatEntry ::=
+ SEQUENCE {
+ rip2IfStatAddress
+ IpAddress,
+ rip2IfStatRcvBadPackets
+ Counter32,
+ rip2IfStatRcvBadRoutes
+ Counter32,
+ rip2IfStatSentUpdates
+ Counter32,
+ rip2IfStatStatus
+ RowStatus
+ }
+
+ rip2IfStatAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP Address of this system on the indicated
+ subnet. For unnumbered interfaces, the value 0.0.0.N,
+ where the least significant 24 bits (N) is the ifIndex
+ for the IP Interface in network byte order."
+ ::= { rip2IfStatEntry 1 }
+
+ rip2IfStatRcvBadPackets OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of RIP response packets received by
+ the RIP process which were subsequently discarded
+ for any reason (e.g. a version 0 packet, or an
+ unknown command type)."
+ ::= { rip2IfStatEntry 2 }
+
+ rip2IfStatRcvBadRoutes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of routes, in valid RIP packets,
+ which were ignored for any reason (e.g. unknown
+ address family, or invalid metric)."
+ ::= { rip2IfStatEntry 3 }
+
+ rip2IfStatSentUpdates OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of triggered RIP updates actually
+ sent on this interface. This explicitly does
+ NOT include full updates sent containing new
+ information."
+ ::= { rip2IfStatEntry 4 }
+
+ rip2IfStatStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Writing invalid has the effect of deleting
+ this interface."
+ ::= { rip2IfStatEntry 5 }
+
+-- The RIP Interface Configuration Table.
+
+ rip2IfConfTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Rip2IfConfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of subnets which require separate
+ configuration in RIP."
+ ::= { rip2 3 }
+
+ rip2IfConfEntry OBJECT-TYPE
+ SYNTAX Rip2IfConfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A Single Routing Domain in a single Subnet."
+ INDEX { rip2IfConfAddress }
+ ::= { rip2IfConfTable 1 }
+
+ Rip2IfConfEntry ::=
+ SEQUENCE {
+ rip2IfConfAddress
+ IpAddress,
+ rip2IfConfDomain
+ RouteTag,
+ rip2IfConfAuthType
+ INTEGER,
+ rip2IfConfAuthKey
+ OCTET STRING (SIZE(0..16)),
+ rip2IfConfSend
+ INTEGER,
+ rip2IfConfReceive
+ INTEGER,
+ rip2IfConfDefaultMetric
+ INTEGER,
+ rip2IfConfStatus
+ RowStatus,
+ rip2IfConfSrcAddress
+ IpAddress
+ }
+
+ rip2IfConfAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP Address of this system on the indicated
+ subnet. For unnumbered interfaces, the value 0.0.0.N,
+ where the least significant 24 bits (N) is the ifIndex
+ for the IP Interface in network byte order."
+ ::= { rip2IfConfEntry 1 }
+
+ rip2IfConfDomain OBJECT-TYPE
+ SYNTAX RouteTag
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "Value inserted into the Routing Domain field
+ of all RIP packets sent on this interface."
+ DEFVAL { '0000'h }
+ ::= { rip2IfConfEntry 2 }
+
+ rip2IfConfAuthType OBJECT-TYPE
+ SYNTAX INTEGER {
+ noAuthentication (1),
+ simplePassword (2),
+ md5 (3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The type of Authentication used on this
+ interface."
+ DEFVAL { noAuthentication }
+ ::= { rip2IfConfEntry 3 }
+
+ rip2IfConfAuthKey OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value to be used as the Authentication Key
+ whenever the corresponding instance of
+ rip2IfConfAuthType has a value other than
+ noAuthentication. A modification of the corresponding
+ instance of rip2IfConfAuthType does not modify
+ the rip2IfConfAuthKey value. If a string shorter
+ than 16 octets is supplied, it will be left-
+ justified and padded to 16 octets, on the right,
+ with nulls (0x00).
+
+ Reading this object always results in an OCTET
+ STRING of length zero; authentication may not
+ be bypassed by reading the MIB object."
+ DEFVAL { ''h }
+ ::= { rip2IfConfEntry 4 }
+
+ rip2IfConfSend OBJECT-TYPE
+ SYNTAX INTEGER {
+ doNotSend (1),
+ ripVersion1 (2),
+ rip1Compatible (3),
+ ripVersion2 (4),
+ ripV1Demand (5),
+ ripV2Demand (6)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "What the router sends on this interface.
+ ripVersion1 implies sending RIP updates compliant
+ with RFC 1058. rip1Compatible implies
+ broadcasting RIP-2 updates using RFC 1058 route
+ subsumption rules. ripVersion2 implies
+ multicasting RIP-2 updates. ripV1Demand indicates
+ the use of Demand RIP on a WAN interface under RIP
+ Version 1 rules. ripV2Demand indicates the use of
+ Demand RIP on a WAN interface under Version 2 rules."
+ DEFVAL { rip1Compatible }
+ ::= { rip2IfConfEntry 5 }
+
+ rip2IfConfReceive OBJECT-TYPE
+ SYNTAX INTEGER {
+ rip1 (1),
+ rip2 (2),
+ rip1OrRip2 (3),
+ doNotRecieve (4)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This indicates which version of RIP updates
+ are to be accepted. Note that rip2 and
+ rip1OrRip2 implies reception of multicast
+ packets."
+ DEFVAL { rip1OrRip2 }
+ ::= { rip2IfConfEntry 6 }
+
+ rip2IfConfDefaultMetric OBJECT-TYPE
+ SYNTAX INTEGER ( 0..15 )
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This variable indicates the metric that is to
+ be used for the default route entry in RIP updates
+ originated on this interface. A value of zero
+ indicates that no default route should be
+ originated; in this case, a default route via
+ another router may be propagated."
+ ::= { rip2IfConfEntry 7 }
+
+ rip2IfConfStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Writing invalid has the effect of deleting
+ this interface."
+ ::= { rip2IfConfEntry 8 }
+
+ rip2IfConfSrcAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The IP Address this system will use as a source
+ address on this interface. If it is a numbered
+ interface, this MUST be the same value as
+ rip2IfConfAddress. On unnumbered interfaces,
+ it must be the value of rip2IfConfAddress for
+ some interface on the system."
+ ::= { rip2IfConfEntry 9 }
+
+--4.3 Peer Table
+
+-- Peer Table
+
+-- The RIP Peer Group
+-- Implementation of this Group is Optional
+
+-- This group provides information about active peer
+-- relationships intended to assist in debugging. An
+-- active peer is a router from which a valid RIP
+-- updated has been heard in the last 180 seconds.
+
+ rip2PeerTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Rip2PeerEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of RIP Peers."
+ ::= { rip2 4 }
+
+ rip2PeerEntry OBJECT-TYPE
+ SYNTAX Rip2PeerEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information regarding a single routing peer."
+ INDEX { rip2PeerAddress, rip2PeerDomain }
+ ::= { rip2PeerTable 1 }
+
+ Rip2PeerEntry ::=
+ SEQUENCE {
+ rip2PeerAddress
+ IpAddress,
+ rip2PeerDomain
+ RouteTag,
+ rip2PeerLastUpdate
+ TimeTicks,
+ rip2PeerVersion
+ INTEGER,
+ rip2PeerRcvBadPackets
+ Counter32,
+ rip2PeerRcvBadRoutes
+ Counter32
+ }
+
+ rip2PeerAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP Address that the peer is using as its source
+ address. Note that on an unnumbered link, this may
+ not be a member of any subnet on the system."
+ ::= { rip2PeerEntry 1 }
+
+ rip2PeerDomain OBJECT-TYPE
+ SYNTAX RouteTag
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value in the Routing Domain field in RIP
+ packets received from the peer. As domain suuport
+ is deprecated, this must be zero."
+ ::= { rip2PeerEntry 2 }
+
+ rip2PeerLastUpdate OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when the most recent
+ RIP update was received from this system."
+ ::= { rip2PeerEntry 3 }
+
+ rip2PeerVersion OBJECT-TYPE
+ SYNTAX INTEGER ( 0..255 )
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The RIP version number in the header of the
+ last RIP packet received."
+ ::= { rip2PeerEntry 4 }
+
+ rip2PeerRcvBadPackets OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of RIP response packets from this
+ peer discarded as invalid."
+ ::= { rip2PeerEntry 5 }
+
+
+ rip2PeerRcvBadRoutes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of routes from this peer that were
+ ignored because the entry format was invalid."
+ ::= { rip2PeerEntry 6 }
+
+-- conformance information
+
+rip2Conformance OBJECT IDENTIFIER ::= { rip2 5 }
+
+rip2Groups OBJECT IDENTIFIER ::= { rip2Conformance 1 }
+rip2Compliances OBJECT IDENTIFIER ::= { rip2Conformance 2 }
+
+-- compliance statements
+rip2Compliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement "
+ MODULE -- this module
+ MANDATORY-GROUPS {
+ rip2GlobalGroup,
+ rip2IfStatGroup,
+ rip2IfConfGroup,
+ rip2PeerGroup
+ }
+ GROUP rip2GlobalGroup
+ DESCRIPTION
+ "This group defines global controls for RIP-II systems."
+ GROUP rip2IfStatGroup
+ DESCRIPTION
+ "This group defines interface statistics for RIP-II systems."
+ GROUP rip2IfConfGroup
+ DESCRIPTION
+ "This group defines interface configuration for RIP-II systems."
+ GROUP rip2PeerGroup
+ DESCRIPTION
+ "This group defines peer information for RIP-II systems."
+ ::= { rip2Compliances 1 }
+
+-- units of conformance
+
+rip2GlobalGroup OBJECT-GROUP
+ OBJECTS {
+ rip2GlobalRouteChanges,
+ rip2GlobalQueries
+ }
+ STATUS current
+ DESCRIPTION
+ "This group defines global controls for RIP-II systems."
+ ::= { rip2Groups 1 }
+rip2IfStatGroup OBJECT-GROUP
+ OBJECTS {
+ rip2IfStatAddress,
+ rip2IfStatRcvBadPackets,
+ rip2IfStatRcvBadRoutes,
+ rip2IfStatSentUpdates,
+ rip2IfStatStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "This group defines interface statistics for RIP-II systems."
+ ::= { rip2Groups 2 }
+rip2IfConfGroup OBJECT-GROUP
+ OBJECTS {
+ rip2IfConfAddress,
+ rip2IfConfAuthType,
+ rip2IfConfAuthKey,
+ rip2IfConfSend,
+ rip2IfConfReceive,
+ rip2IfConfDefaultMetric,
+ rip2IfConfStatus,
+ rip2IfConfSrcAddress
+ }
+ STATUS current
+ DESCRIPTION
+ "This group defines interface configuration for RIP-II systems."
+ ::= { rip2Groups 3 }
+rip2PeerGroup OBJECT-GROUP
+ OBJECTS {
+ rip2PeerAddress,
+ rip2PeerDomain,
+ rip2PeerLastUpdate,
+ rip2PeerVersion,
+ rip2PeerRcvBadPackets,
+ rip2PeerRcvBadRoutes
+ }
+ STATUS current
+ DESCRIPTION
+ "This group defines peer information for RIP-II systems."
+ ::= { rip2Groups 4 }
+END
--- /dev/null
+++ b/mibs/SOURCE-ROUTING-MIB.txt
@@ -0,0 +1,452 @@
+SOURCE-ROUTING-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ Counter, Gauge
+ FROM RFC1155-SMI
+ dot1dBridge, dot1dSr
+ FROM BRIDGE-MIB
+ OBJECT-TYPE
+ FROM RFC-1212;
+
+-- groups in the SR MIB
+
+-- dot1dSr is imported from the Bridge MIB
+
+dot1dPortPair OBJECT IDENTIFIER ::= { dot1dBridge 10 }
+
+-- the dot1dSr group
+
+-- this group is implemented by those bridges that
+-- support the source route bridging mode, including Source
+-- Routing and SRT bridges.
+
+dot1dSrPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Dot1dSrPortEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A table that contains information about every
+ port that is associated with this source route
+ bridge."
+ ::= { dot1dSr 1 }
+
+dot1dSrPortEntry OBJECT-TYPE
+ SYNTAX Dot1dSrPortEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A list of information for each port of a source
+ route bridge."
+ INDEX { dot1dSrPort }
+
+ ::= { dot1dSrPortTable 1 }
+
+Dot1dSrPortEntry ::=
+ SEQUENCE {
+ dot1dSrPort
+ INTEGER,
+ dot1dSrPortHopCount
+ INTEGER,
+ dot1dSrPortLocalSegment
+ INTEGER,
+ dot1dSrPortBridgeNum
+ INTEGER,
+ dot1dSrPortTargetSegment
+ INTEGER,
+ dot1dSrPortLargestFrame
+ INTEGER,
+ dot1dSrPortSTESpanMode
+ INTEGER,
+ dot1dSrPortSpecInFrames
+ Counter,
+ dot1dSrPortSpecOutFrames
+ Counter,
+ dot1dSrPortApeInFrames
+ Counter,
+ dot1dSrPortApeOutFrames
+ Counter,
+ dot1dSrPortSteInFrames
+ Counter,
+ dot1dSrPortSteOutFrames
+ Counter,
+ dot1dSrPortSegmentMismatchDiscards
+ Counter,
+ dot1dSrPortDuplicateSegmentDiscards
+ Counter,
+ dot1dSrPortHopCountExceededDiscards
+ Counter,
+ dot1dSrPortDupLanIdOrTreeErrors
+ Counter,
+ dot1dSrPortLanIdMismatches
+ Counter
+ }
+
+dot1dSrPort OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The port number of the port for which this entry
+
+ contains Source Route management information."
+ ::= { dot1dSrPortEntry 1 }
+
+dot1dSrPortHopCount OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The maximum number of routing descriptors allowed
+ in an All Paths or Spanning Tree Explorer frames."
+ ::= { dot1dSrPortEntry 2 }
+
+dot1dSrPortLocalSegment OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The segment number that uniquely identifies the
+ segment to which this port is connected. Current
+ source routing protocols limit this value to the
+ range: 0 through 4095. (The value 0 is used by
+ some management applications for special test
+ cases.) A value of 65535 signifies that no segment
+ number is assigned to this port."
+ ::= { dot1dSrPortEntry 3 }
+
+dot1dSrPortBridgeNum OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A bridge number uniquely identifies a bridge when
+ more than one bridge is used to span the same two
+ segments. Current source routing protocols limit
+ this value to the range: 0 through 15. A value of
+ 65535 signifies that no bridge number is assigned
+ to this bridge."
+ ::= { dot1dSrPortEntry 4 }
+
+dot1dSrPortTargetSegment OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The segment number that corresponds to the target
+ segment this port is considered to be connected to
+ by the bridge. Current source routing protocols
+ limit this value to the range: 0 through 4095.
+
+ (The value 0 is used by some management
+ applications for special test cases.) A value of
+ 65535 signifies that no target segment is assigned
+ to this port."
+ ::= { dot1dSrPortEntry 5 }
+
+-- It would be nice if we could use ifMtu as the size of the
+-- largest frame, but we can't because ifMtu is defined to be
+-- the size that the (inter-)network layer can use which can
+-- differ from the MAC layer (especially if several layers of
+-- encapsulation are used).
+
+dot1dSrPortLargestFrame OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The maximum size of the INFO field (LLC and
+ above) that this port can send/receive. It does
+ not include any MAC level (framing) octets. The
+ value of this object is used by this bridge to
+ determine whether a modification of the
+ LargestFrame (LF, see [14]) field of the Routing
+ Control field of the Routing Information Field is
+ necessary.
+
+ 64 valid values are defined by the IEEE 802.5M SRT
+ Addendum: 516, 635, 754, 873, 993, 1112, 1231,
+ 1350, 1470, 1542, 1615, 1688, 1761, 1833, 1906,
+ 1979, 2052, 2345, 2638, 2932, 3225, 3518, 3812,
+ 4105, 4399, 4865, 5331, 5798, 6264, 6730, 7197,
+ 7663, 8130, 8539, 8949, 9358, 9768, 10178, 10587,
+ 10997, 11407, 12199, 12992, 13785, 14578, 15370,
+ 16163, 16956, 17749, 20730, 23711, 26693, 29674,
+ 32655, 35637, 38618, 41600, 44591, 47583, 50575,
+ 53567, 56559, 59551, and 65535.
+
+ An illegal value will not be accepted by the
+ bridge."
+ ::= { dot1dSrPortEntry 6 }
+
+dot1dSrPortSTESpanMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ auto-span(1),
+ disabled(2),
+ forced(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Determines how this port behaves when presented
+ with a Spanning Tree Explorer frame. The value
+ 'disabled(2)' indicates that the port will not
+ accept or send Spanning Tree Explorer packets; any
+ STE packets received will be silently discarded.
+ The value 'forced(3)' indicates the port will
+ always accept and propagate Spanning Tree Explorer
+ frames. This allows a manually configured
+ Spanning Tree for this class of packet to be
+ configured. Note that unlike transparent
+ bridging, this is not catastrophic to the network
+ if there are loops. The value 'auto-span(1)' can
+ only be returned by a bridge that both implements
+ the Spanning Tree Protocol and has use of the
+ protocol enabled on this port. The behavior of the
+ port for Spanning Tree Explorer frames is
+ determined by the state of dot1dStpPortState. If
+ the port is in the 'forwarding' state, the frame
+ will be accepted or propagated. Otherwise, it
+ will be silently discarded."
+ ::= { dot1dSrPortEntry 7 }
+
+dot1dSrPortSpecInFrames OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of Specifically Routed frames, also
+ referred to as Source Routed Frames, that have
+ been received from this port's segment."
+ ::= { dot1dSrPortEntry 8 }
+
+dot1dSrPortSpecOutFrames OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of Specifically Routed frames, also
+ referred to as Source Routed Frames, that this
+ port has transmitted on its segment."
+ ::= { dot1dSrPortEntry 9 }
+
+dot1dSrPortApeInFrames OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of All Paths Explorer frames, also
+ referred to as All Routes Explorer frames, that
+ have been received by this port from its segment."
+ ::= { dot1dSrPortEntry 10 }
+
+dot1dSrPortApeOutFrames OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of all Paths Explorer Frames, also
+ referred to as All Routes Explorer frames, that
+ have been transmitted by this port on its
+ segment."
+ ::= { dot1dSrPortEntry 11 }
+
+dot1dSrPortSteInFrames OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of spanning tree explorer frames that
+ have been received by this port from its segment."
+ ::= { dot1dSrPortEntry 12 }
+
+dot1dSrPortSteOutFrames OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of spanning tree explorer frames that
+ have been transmitted by this port on its
+ segment."
+ ::= { dot1dSrPortEntry 13 }
+
+dot1dSrPortSegmentMismatchDiscards OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of explorer frames that have been
+ discarded by this port because the routing
+ descriptor field contained an invalid adjacent
+ segment value."
+ ::= { dot1dSrPortEntry 14 }
+
+dot1dSrPortDuplicateSegmentDiscards OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of frames that have been discarded by
+ this port because the routing descriptor field
+ contained a duplicate segment identifier."
+ ::= { dot1dSrPortEntry 15 }
+
+dot1dSrPortHopCountExceededDiscards OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of explorer frames that have been
+ discarded by this port because the Routing
+ Information Field has exceeded the maximum route
+ descriptor length."
+ ::= { dot1dSrPortEntry 16 }
+
+dot1dSrPortDupLanIdOrTreeErrors OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of duplicate LAN IDs or Tree errors.
+ This helps in detection of problems in networks
+ containing older IBM Source Routing Bridges."
+ ::= { dot1dSrPortEntry 17 }
+
+dot1dSrPortLanIdMismatches OBJECT-TYPE
+ SYNTAX Counter
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of ARE and STE frames that were
+ discarded because the last LAN ID in the routing
+ information field did not equal the LAN-in ID.
+ This error can occur in implementations which do
+ only a LAN-in ID and Bridge Number check instead
+ of a LAN-in ID, Bridge Number, and LAN-out ID
+ check before they forward broadcast frames."
+ ::= { dot1dSrPortEntry 18 }
+
+-- scalar object in dot1dSr
+
+dot1dSrBridgeLfMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ mode3(1),
+ mode6(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the bridge operates using older
+ 3 bit length negotiation fields or the newer 6 bit
+ length field in its RIF."
+ ::= { dot1dSr 2 }
+
+-- The Port-Pair Database
+
+-- Implementation of this group is optional.
+
+-- This group is implemented by those bridges that support
+-- the direct multiport model of the source route bridging
+-- mode as defined in the IEEE 802.5 SRT Addendum to
+-- 802.1d.
+
+-- Bridges implementing this group may report 65535 for
+-- dot1dSrPortBridgeNumber and dot1dSrPortTargetSegment,
+-- indicating that those objects are not applicable.
+
+dot1dPortPairTableSize OBJECT-TYPE
+ SYNTAX Gauge
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The total number of entries in the Bridge Port
+ Pair Database."
+ ::= { dot1dPortPair 1 }
+
+-- the Bridge Port-Pair table
+
+-- this table represents port pairs within a bridge forming
+-- a unique bridge path, as defined in the IEEE 802.5M SRT
+-- Addendum.
+
+dot1dPortPairTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Dot1dPortPairEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A table that contains information about every
+
+ port pair database entity associated with this
+ source routing bridge."
+ ::= { dot1dPortPair 2 }
+
+dot1dPortPairEntry OBJECT-TYPE
+ SYNTAX Dot1dPortPairEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A list of information for each port pair entity
+ of a bridge."
+ INDEX { dot1dPortPairLowPort, dot1dPortPairHighPort }
+ ::= { dot1dPortPairTable 1 }
+
+Dot1dPortPairEntry ::=
+ SEQUENCE {
+ dot1dPortPairLowPort
+ INTEGER,
+ dot1dPortPairHighPort
+ INTEGER,
+ dot1dPortPairBridgeNum
+ INTEGER,
+ dot1dPortPairBridgeState
+ INTEGER
+ }
+
+dot1dPortPairLowPort OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The port number of the lower numbered port for
+ which this entry contains port pair database
+ information."
+ ::= { dot1dPortPairEntry 1 }
+
+dot1dPortPairHighPort OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The port number of the higher numbered port for
+ which this entry contains port pair database
+ information."
+ ::= { dot1dPortPairEntry 2 }
+
+dot1dPortPairBridgeNum OBJECT-TYPE
+ SYNTAX INTEGER
+
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A bridge number that uniquely identifies the path
+ provided by this source routing bridge between the
+ segments connected to dot1dPortPairLowPort and
+ dot1dPortPairHighPort. The purpose of bridge
+ number is to disambiguate between multiple paths
+ connecting the same two LANs."
+ ::= { dot1dPortPairEntry 3 }
+
+dot1dPortPairBridgeState OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2),
+ invalid(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The state of dot1dPortPairBridgeNum. Writing
+ 'invalid(3)' to this object removes the
+ corresponding entry."
+ ::= { dot1dPortPairEntry 4 }
+
+END