2aadefb3f0
- Full-featured UCI configuration file (no need for babeld.conf).
- Do not check the pid file (useless) and ahcpd script (harmful).
- Make /etc/config/babeld a config file.
- Launch at most one instance of babeld.
- Add status and reload options to init script.
- 8 February 2010: babeld 0.98:
* Implement the ability to prefer Babel routes to external routes
according to the kernel priority (-A).
* Implement the ability to redistribute "boot" routes when the
protocol is explicitly specified on the "redistribute" line.
* Allow trailing whitespace in config file.
Signed-off-by: Gabriel Kerneis <kerneis@pps.jussieu.fr>
git-svn-id: svn://svn.openwrt.org/openwrt/packages@19754 3c298f89-4303-0410-b956-a3cf2f4a3e73
41 lines
1.4 KiB
Plaintext
41 lines
1.4 KiB
Plaintext
# babel config file
|
|
# Copyright (C) 2008-2010 Juliusz Chroboczek, L. Aaron Kaplan
|
|
# <jch@pps.jussieu.fr> , <aaron@lo-res.org>
|
|
#
|
|
# This config file simply documents sample entries.
|
|
# "redistribute" means: redistribute routes from other routing protocols
|
|
# into babel. "local" means addresses assigned to local interfaces.
|
|
#
|
|
# You do not need to edit this file: you can use /etc/config/babeld
|
|
# instead (sections "interface" and "filter"). Both files can be used
|
|
# simultaneously (the rules of this file are executed first).
|
|
|
|
# the default rules are:
|
|
#
|
|
## redistribute local
|
|
## redistribute deny
|
|
#
|
|
# this says, redistribute local addresses but no other routes
|
|
|
|
|
|
# redistribute IPv4 default route into babel
|
|
## redistribute local ip 0.0.0.0/0 le 0 metric 128
|
|
|
|
# same but for IPv6
|
|
## redistribute local ip ::/0 le 0 metric 128
|
|
|
|
|
|
# don't redistribute all local addresses, only selected ones
|
|
# after the first line, the "deny" rules kicks in. After the "deny"
|
|
# no redistribute local rules are going to match
|
|
## redistribute local ip 192.160.4.0/24
|
|
## redistribute local deny
|
|
|
|
|
|
# Babel refuses to redistribute routes with a protocol number of "boot";
|
|
# this is standard practice, and means that you cannot easily
|
|
# redistribute the default route installed by dhcp. It is however
|
|
# possible to redistribute such route by explicitly specifying "proto 3"
|
|
# on the redistribute line.
|
|
## redistribute ip 0.0.0.0/0 le 0 proto 3 metric 128
|