bakabtw/packages
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
packages/net/freeradius2/patches/002-config.patch
hauke 5f26543a7e freeradius2: update to version 2.1.10 
This closes #8252 and #7810


git-svn-id: svn://svn.openwrt.org/openwrt/packages@24059 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-21 14:24:49 +00:00

589 lines
14 KiB
Diff
Raw Blame History

--- a/raddb/dictionary.in
+++ b/raddb/dictionary.in
@@ -11,7 +11,7 @@
#
# The filename given here should be an absolute path.
#
-$INCLUDE @prefix@/share/freeradius/dictionary
+$INCLUDE @prefix@/share/freeradius2/dictionary
#
# Place additional attributes or $INCLUDEs here. They will
--- a/raddb/eap.conf
+++ b/raddb/eap.conf
@@ -27,7 +27,7 @@
# then that EAP type takes precedence over the
# default type configured here.
#
- default_eap_type = md5
+ default_eap_type = peap
# A list is maintained to correlate EAP-Response
# packets with EAP-Request packets. After a
@@ -72,8 +72,8 @@
# for wireless connections. It is insecure, and does
# not provide for dynamic WEP keys.
#
- md5 {
- }
+# md5 {
+# }
# Cisco LEAP
#
@@ -87,8 +87,8 @@
# User-Password, or the NT-Password attributes.
# 'System' authentication is impossible with LEAP.
#
- leap {
- }
+# leap {
+# }
# Generic Token Card.
#
@@ -101,7 +101,7 @@
# the users password will go over the wire in plain-text,
# for anyone to see.
#
- gtc {
+# gtc {
# The default challenge, which many clients
# ignore..
#challenge = "Password: "
@@ -118,8 +118,8 @@
# configured for the request, and do the
# authentication itself.
#
- auth_type = PAP
- }
+# auth_type = PAP
+# }
## EAP-TLS
#
@@ -205,7 +205,7 @@
# In these cases, fragment size should be
# 1024 or less.
#
- # fragment_size = 1024
+ fragment_size = 1024
# include_length is a flag which is
# by default set to yes If set to
@@ -215,7 +215,7 @@
# message is included ONLY in the
# First packet of a fragment series.
#
- # include_length = yes
+ include_length = yes
# Check the Certificate Revocation List
#
@@ -271,7 +271,7 @@
# configuration. It is here ONLY to make
# initial deployments easier.
#
- make_cert_command = "${certdir}/bootstrap"
+ # make_cert_command = "${certdir}/bootstrap"
#
# Session resumption / fast reauthentication
@@ -299,7 +299,7 @@
# You probably also want "use_tunneled_reply = yes"
# when using fast session resumption.
#
- cache {
+ # cache {
#
# Enable it. The default is "no".
# Deleting the entire "cache" subsection
@@ -315,14 +315,14 @@
# enable resumption for just one user
# by setting the above attribute to "yes".
#
- enable = no
+ # enable = no
#
# Lifetime of the cached entries, in hours.
# The sessions will be deleted after this
# time.
#
- lifetime = 24 # hours
+ # lifetime = 24 # hours
#
# The maximum number of entries in the
@@ -331,8 +331,8 @@
# This could be set to the number of users
# who are logged in... which can be a LOT.
#
- max_entries = 255
- }
+ # max_entries = 255
+ # }
#
# As of version 2.1.10, client certificates can be
@@ -394,7 +394,7 @@
#
# in the control items for a request.
#
- ttls {
+# ttls {
# The tunneled EAP session needs a default
# EAP type which is separate from the one for
# the non-tunneled EAP module. Inside of the
@@ -402,7 +402,7 @@
# If the request does not contain an EAP
# conversation, then this configuration entry
# is ignored.
- default_eap_type = md5
+# default_eap_type = mschapv2
# The tunneled authentication request does
# not usually contain useful attributes
@@ -418,7 +418,7 @@
# is copied to the tunneled request.
#
# allowed values: {no, yes}
- copy_request_to_tunnel = no
+# copy_request_to_tunnel = yes
# The reply attributes sent to the NAS are
# usually based on the name of the user
@@ -431,7 +431,7 @@
# the tunneled request.
#
# allowed values: {no, yes}
- use_tunneled_reply = no
+# use_tunneled_reply = no
#
# The inner tunneled request can be sent
@@ -443,13 +443,13 @@
# the virtual server that processed the
# outer requests.
#
- virtual_server = "inner-tunnel"
+# virtual_server = "inner-tunnel"
# This has the same meaning as the
# same field in the "tls" module, above.
# The default value here is "yes".
# include_length = yes
- }
+# }
##################################################
#
@@ -518,14 +518,14 @@
# the PEAP module also has these configuration
# items, which are the same as for TTLS.
- copy_request_to_tunnel = no
- use_tunneled_reply = no
+ copy_request_to_tunnel = yes
+ use_tunneled_reply = yes
# When the tunneled session is proxied, the
# home server may not understand EAP-MSCHAP-V2.
# Set this entry to "no" to proxy the tunneled
# EAP-MSCHAP-V2 as normal MSCHAPv2.
- # proxy_tunneled_request_as_eap = yes
+ proxy_tunneled_request_as_eap = no
#
# The inner tunneled request can be sent
@@ -537,7 +537,8 @@
# the virtual server that processed the
# outer requests.
#
- virtual_server = "inner-tunnel"
+ # virtual_server = "inner-tunnel"
+ EAP-TLS-Require-Client-Cert = no
}
#
--- a/raddb/modules/counter
+++ b/raddb/modules/counter
@@ -69,7 +69,7 @@
# 'check-name' attribute.
#
counter daily {
- filename = ${db_dir}/db.daily
+ filename = ${radacctdir}/db.daily
key = User-Name
count-attribute = Acct-Session-Time
reset = daily
--- a/raddb/modules/pap
+++ b/raddb/modules/pap
@@ -14,5 +14,5 @@
# with the correct value. It will also automatically handle
# Base-64 encoded data, hex strings, and binary data.
pap {
- auto_header = no
+ auto_header = yes
}
--- a/raddb/modules/radutmp
+++ b/raddb/modules/radutmp
@@ -12,7 +12,7 @@ radutmp {
# Where the file is stored. It's not a log file,
# so it doesn't need rotating.
#
- filename = ${logdir}/radutmp
+ filename = ${radacctdir}/radutmp
# The field in the packet to key on for the
# 'user' name, If you have other fields which you want
--- a/raddb/modules/sradutmp
+++ b/raddb/modules/sradutmp
@@ -10,7 +10,7 @@
# then name "sradutmp" to identify it later in the "accounting"
# section.
radutmp sradutmp {
- filename = ${logdir}/sradutmp
+ filename = ${radacctdir}/sradutmp
perm = 0644
callerid = "no"
}
--- a/raddb/radiusd.conf.in
+++ b/raddb/radiusd.conf.in
@@ -66,7 +66,7 @@ name = radiusd
# Location of config and logfiles.
confdir = ${raddbdir}
-run_dir = ${localstatedir}/run/${name}
+run_dir = ${localstatedir}/run
# Should likely be ${localstatedir}/lib/radiusd
db_dir = ${raddbdir}
@@ -290,7 +290,7 @@ listen {
# If your system does not support this feature, you will
# get an error if you try to use it.
#
-# interface = eth0
+ interface = br-lan
# Per-socket lists of clients. This is a very useful feature.
#
@@ -317,7 +317,7 @@ listen {
# ipv6addr = ::
port = 0
type = acct
-# interface = eth0
+ interface = br-lan
# clients = per_socket_clients
}
@@ -541,8 +541,8 @@ security {
#
# allowed values: {no, yes}
#
-proxy_requests = yes
-$INCLUDE proxy.conf
+proxy_requests = no
+#$INCLUDE proxy.conf
# CLIENTS CONFIGURATION
@@ -722,7 +722,7 @@ instantiate {
# The entire command line (and output) must fit into 253 bytes.
#
# e.g. Framed-Pool = `%{exec:/bin/echo foo}`
- exec
+# exec
#
# The expression module doesn't do authorization,
@@ -735,15 +735,15 @@ instantiate {
# listed in any other section. See 'doc/rlm_expr' for
# more information.
#
- expr
+# expr
#
# We add the counter module here so that it registers
# the check-name attribute before any module which sets
# it
# daily
- expiration
- logintime
+# expiration
+# logintime
# subsections here can be thought of as "virtual" modules.
#
@@ -767,7 +767,7 @@ instantiate {
# to multiple times.
#
######################################################################
-$INCLUDE policy.conf
+#$INCLUDE policy.conf
######################################################################
#
@@ -777,9 +777,9 @@ $INCLUDE policy.conf
# match the regular expression: /[a-zA-Z0-9_.]+/
#
# It allows you to define new virtual servers simply by placing
-# a file into the raddb/sites-enabled/ directory.
+# a file into the /etc/freeradius2/sites/ directory.
#
-$INCLUDE sites-enabled/
+$INCLUDE sites/
######################################################################
#
@@ -787,7 +787,7 @@ $INCLUDE sites-enabled/
# "authenticate {}", "accounting {}", have been moved to the
# the file:
#
-# raddb/sites-available/default
+# /etc/freeradius2/sites/default
#
# This is the "default" virtual server that has the same
# configuration as in version 1.0.x and 1.1.x. The default
--- a/raddb/sites-available/default
+++ b/raddb/sites-available/default
@@ -67,7 +67,7 @@ authorize {
#
# It takes care of processing the 'raddb/hints' and the
# 'raddb/huntgroups' files.
- preprocess
+# preprocess
#
# If you want to have a log of authentication requests,
@@ -78,7 +78,7 @@ authorize {
#
# The chap module will set 'Auth-Type := CHAP' if we are
# handling a CHAP request and Auth-Type has not already been set
- chap
+# chap
#
# If the users are logging in with an MS-CHAP-Challenge
@@ -86,13 +86,13 @@ authorize {
# the MS-CHAP-Challenge attribute, and add 'Auth-Type := MS-CHAP'
# to the request, which will cause the server to then use
# the mschap module for authentication.
- mschap
+# mschap
#
# If you have a Cisco SIP server authenticating against
# FreeRADIUS, uncomment the following line, and the 'digest'
# line in the 'authenticate' section.
- digest
+# digest
#
# The WiMAX specification says that the Calling-Station-Id
@@ -115,7 +115,7 @@ authorize {
# Otherwise, when the first style of realm doesn't match,
# the other styles won't be checked.
#
- suffix
+# suffix
# ntdomain
#
@@ -177,8 +177,8 @@ authorize {
# Use the checkval module
# checkval
- expiration
- logintime
+# expiration
+# logintime
#
# If no other module has claimed responsibility for
@@ -259,7 +259,7 @@ authenticate {
# If you have a Cisco SIP server authenticating against
# FreeRADIUS, uncomment the following line, and the 'digest'
# line in the 'authorize' section.
- digest
+# digest
#
# Pluggable Authentication Modules.
@@ -276,7 +276,7 @@ authenticate {
# be used for authentication ONLY for compatibility with legacy
# FreeRADIUS configurations.
#
- unix
+# unix
# Uncomment it if you want to use ldap for authentication
#
@@ -312,8 +312,8 @@ authenticate {
#
# Pre-accounting. Decide which accounting type to use.
#
-preacct {
- preprocess
+#preacct {
+# preprocess
#
# Session start times are *implied* in RADIUS.
@@ -336,7 +336,7 @@ preacct {
#
# Ensure that we have a semi-unique identifier for every
# request, and many NAS boxes are broken.
- acct_unique
+# acct_unique
#
# Look for IPASS-style 'realm/', and if not found, look for
@@ -346,13 +346,13 @@ preacct {
# Accounting requests are generally proxied to the same
# home server as authentication requests.
# IPASS
- suffix
+# suffix
# ntdomain
#
# Read the 'acct_users' file
- files
-}
+# files
+#}
#
# Accounting. Log the accounting data.
@@ -362,7 +362,7 @@ accounting {
# Create a 'detail'ed log of the packets.
# Note that accounting requests which are proxied
# are also logged in the detail file.
- detail
+# detail
# daily
# Update the wtmp file
@@ -414,7 +414,7 @@ accounting {
exec
# Filter attributes from the accounting response.
- attr_filter.accounting_response
+ #attr_filter.accounting_response
#
# See "Autz-Type Status-Server" for how this works.
@@ -440,7 +440,7 @@ session {
# Post-Authentication
# Once we KNOW that the user has been authenticated, there are
# additional steps we can take.
-post-auth {
+#post-auth {
# Get an address from the IP Pool.
# main_pool
@@ -470,7 +470,7 @@ post-auth {
# ldap
# For Exec-Program and Exec-Program-Wait
- exec
+# exec
#
# Calculate the various WiMAX keys. In order for this to work,
@@ -540,12 +540,12 @@ post-auth {
# Add the ldap module name (or instance) if you have set
# 'edir_account_policy_check = yes' in the ldap module configuration
#
- Post-Auth-Type REJECT {
- # log failed authentications in SQL, too.
+# Post-Auth-Type REJECT {
+# # log failed authentications in SQL, too.
# sql
- attr_filter.access_reject
- }
-}
+# attr_filter.access_reject
+# }
+#}
#
# When the server decides to proxy a request to a home server,
@@ -555,7 +555,7 @@ post-auth {
#
# Only a few modules currently have this method.
#
-pre-proxy {
+#pre-proxy {
# attr_rewrite
# Uncomment the following line if you want to change attributes
@@ -571,14 +571,14 @@ pre-proxy {
# server, un-comment the following line, and the
# 'detail pre_proxy_log' section, above.
# pre_proxy_log
-}
+#}
#
# When the server receives a reply to a request it proxied
# to a home server, the request may be massaged here, in the
# post-proxy stage.
#
-post-proxy {
+#post-proxy {
# If you want to have a log of replies from a home server,
# un-comment the following line, and the 'detail post_proxy_log'
@@ -602,7 +602,7 @@ post-proxy {
# hidden inside of the EAP packet, and the end server will
# reject the EAP request.
#
- eap
+# eap
#
# If the server tries to proxy a request and fails, then the
@@ -624,5 +624,5 @@ post-proxy {
# Post-Proxy-Type Fail {
# detail
# }
-}
+#}
--- a/raddb/users
+++ b/raddb/users
@@ -169,22 +169,22 @@
# by the terminal server in which case there may not be a "P" suffix.
# The terminal server sends "Framed-Protocol = PPP" for auto PPP.
#
-DEFAULT Framed-Protocol == PPP
- Framed-Protocol = PPP,
- Framed-Compression = Van-Jacobson-TCP-IP
+#DEFAULT Framed-Protocol == PPP
+# Framed-Protocol = PPP,
+# Framed-Compression = Van-Jacobson-TCP-IP
#
# Default for CSLIP: dynamic IP address, SLIP mode, VJ-compression.
#
-DEFAULT Hint == "CSLIP"
- Framed-Protocol = SLIP,
- Framed-Compression = Van-Jacobson-TCP-IP
+#DEFAULT Hint == "CSLIP"
+# Framed-Protocol = SLIP,
+# Framed-Compression = Van-Jacobson-TCP-IP
#
# Default for SLIP: dynamic IP address, SLIP mode.
#
-DEFAULT Hint == "SLIP"
- Framed-Protocol = SLIP
+#DEFAULT Hint == "SLIP"
+# Framed-Protocol = SLIP
#
# Last default: rlogin to our main server.
Reference in New Issue View Git Blame Copy Permalink