This makes this version of netperf work with the netperf-wrapper testing tool
used for testing for bufferbloat.
Patch by: Toke Høiland-Jørgensen <toke@toke.dk>
git-svn-id: svn://svn.openwrt.org/openwrt/packages@36341 3c298f89-4303-0410-b956-a3cf2f4a3e73
12 April 2013: babeld-1.3.5
* Fix parsing of "channel interfering". Reported by Gioacchino
Mazzurco.
* Correctly reset rp_filter to its old value at shutdown. Thanks to
Matthias Schiffer.
* Work around a race condition that could cause us to fail to notice
an interface's link-local address, and hence mark all neighbours
as unreachable. Reported by Gabriel Kerneis.
git-svn-id: svn://svn.openwrt.org/openwrt/packages@36330 3c298f89-4303-0410-b956-a3cf2f4a3e73
changed scope/position of this function, and reuse it.
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
git-svn-id: svn://svn.openwrt.org/openwrt/packages@36300 3c298f89-4303-0410-b956-a3cf2f4a3e73
Range is 1...20 where 1 is fastest protocol speed and 20 is the slowest protocol speed
Like in the Freifunk-Firmware from sven-ola we accept now a per-interface
option 'speed', which should range from 1...20 and is sanitized. when the
value is not in valid range, it defaults to 6 which allows the daemon to
start and behave like in a city-wide mesh. (same default like in freifunk firmware)
The value 'speed' overrides the normal values for emission intervals like
Hello-, Tc-, Mid-, Hna-Interval/ValidityTime or sets them explicitely. this
makes it much easier to play with intervals on several routers:
Instead of changes eight values, we only have to alter 1 value.
The value-calculation is tested since several years.
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
git-svn-id: svn://svn.openwrt.org/openwrt/packages@36299 3c298f89-4303-0410-b956-a3cf2f4a3e73
Later we want to reuse that functionality, to avoid code duplication
we make a function with clean entry and return-codes, so we can do e.g.:
get_value_for_entry "$entry" || continue
which is also better readable.
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
git-svn-id: svn://svn.openwrt.org/openwrt/packages@36298 3c298f89-4303-0410-b956-a3cf2f4a3e73
zsh would use gdbm if available, failing packaging checks.
Signed-off-by: Francisco Borges <francisco.borges@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/packages@36106 3c298f89-4303-0410-b956-a3cf2f4a3e73
flex is build as a tool inside the build system, so use it.
[florian: bump package revision]
Signed-off-by: Waldemar Brodkorb <mail@waldemar-brodkorb.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/packages@36105 3c298f89-4303-0410-b956-a3cf2f4a3e73
We need to unset make to cross-compile with gmake under FreeBSD.
Signed-off-by: Waldemar Brodkorb <mail@waldemar-brodkorb.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/packages@36104 3c298f89-4303-0410-b956-a3cf2f4a3e73
This library directory is required to link
against pulseaudio. e.g. mpd with pulseaudio support.
Signed-off-by: Alexander Couzens <lynxis@base45.de>
git-svn-id: svn://svn.openwrt.org/openwrt/packages@36103 3c298f89-4303-0410-b956-a3cf2f4a3e73
With pleasure we announce the release of tinc version 1.0.20. Here is a
summary of the changes:
* Use /dev/tap0 by default on FreeBSD and NetBSD when using switch mode.
* Minor improvements and clarifications in the documentation.
* Allow tinc to be cross-compiled with Android's NDK.
* The discovered PMTU is now also applied to VLAN tagged traffic.
* The LocalDiscovery option now makes use of all addresses tinc is bound to.
* Fixed support for tunemu on iOS devices.
* The PriorityInheritance option now also works with switch mode.
* Fixed tinc crashing when using a SOCKS5 proxy.
Thanks to Mesar Hameed, Vilbrekin and Martin Schürrer for their contributions
to this version of tinc.
This version of tinc is compatible with 1.0pre8, 1.0 and later, but not
with earlier version of tinc.
Note that this will be one of the last releases of the 1.0 branch of tinc. Most
of the development is now happening on the 1.1 branch, with tinc 1.1pre6 being
the latest pre-release version, which you are encouraged to try out. The 1.1
branch is backwards compatible with tinc 1.0.
git-svn-id: svn://svn.openwrt.org/openwrt/packages@36041 3c298f89-4303-0410-b956-a3cf2f4a3e73
Bridge-utils uses kernel headers. Linux 3.8 has a header,
include/uapi/linux/if_bridge.h that uses a struct in6_addr but
doesn't define it. The trivial seeming fix of including the header
that does define it causes more problems. The problem was discussed
on mailing lists in January 2013. The final suggestion I found was
here:
http://www.redhat.com/archives/libvir-list/2013-January/msg01253.html
This is intended to implement that suggestion.
Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/packages@35999 3c298f89-4303-0410-b956-a3cf2f4a3e73
instead of using 'little' hardcoded, rely on the config
I recommend to backport this fix to AA, once this bug
prevents MD5 authentication in protocol v3.
Signed-off-by: Jonh Wendell <jonh.wendell@oiwifi.com.br>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/packages@35956 3c298f89-4303-0410-b956-a3cf2f4a3e73
gmp modified some if it's internal constants, in particular
__GMP_BITS_PER_MP_LIMB. Added a patch to substitute GMP_LIMB_BITS.
Also bumped release number and copyright date.
Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/packages@35955 3c298f89-4303-0410-b956-a3cf2f4a3e73
With the netifd integration the batman-adv script broke. This script
can safely be removed because '/etc/init.d/network' reloads the
batman-adv interfaces as well (thanks to netifd).
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
git-svn-id: svn://svn.openwrt.org/openwrt/packages@35867 3c298f89-4303-0410-b956-a3cf2f4a3e73
